前齒盤
Product # 404-15
233.96 ~ HKD (4,523 日幣)
定價 248.29 HKD 节省 最多 6%
+45~ Webike點數 (2.32 HKD)
當訂單成立時,我們將確認製造商的庫存並透過e-mail發送確認出貨時間給您。
匹配
- TDM85091-95
Product # 404-15
233.96 ~ HKD (4,523 日幣)
定價 248.29 HKD 节省 最多 6%
+45~ Webike點數 (2.32 HKD)
匹配
■前齒盤
■適合鏈條規格:525
【材質】
鉻鉬鋼 (四氧化三鐵表面處理)
【顏色】
黑色
【特色】
熱處理:滲氮處理
耐久性:10000-30000km(※)
※改裝鏈條/齒盤時,請一併更換為對應規格的齒盤/鏈條。
※實際商品可能存在色差或些許樣式差異。
※大幅度改變齒盤齒數可能導致無法安裝或其他問題。
※耐久性為參考值,實際壽命依使用環境、保養狀況等條件而有所不同。
※(若有提供)偏移參數僅針對齒盤。
※所需偏移值依安裝車種或個別設定而異,若原廠即搭配偏移齒盤,該偏移值將被扣除。
※可根據自身需求選擇所需規格的齒盤、鏈條,但需自行確認大幅度改裝時的相容性。
使用高品質原料、以高標準進行精密加工,並進行特殊熱處理及防鏽處理,故具有優異耐用性。
Model Page Links
Fits: KAWASAKI W400 06-08, KAWASAKI W650 04-08, KAWASAKI ZEPHYR750 01-06, KAWASAKI ZEPHYR750 90-94, KAWASAKI ZEPHYR750RS 01-06
I ran 28,000 kilometers, but Sprocket was not scraped at all, I was lighter than OEM and I was good at switching reliability, did I also have made it the same?View Detail
Fits: KAWASAKI W400 06-08, KAWASAKI W650 04-08, KAWASAKI ZEPHYR750 01-06, KAWASAKI ZEPHYR750 90-94, KAWASAKI ZEPHYR750RS 01-06
I could install it with no problem with reliable Brand etc.. I think whether durability is also a problem.
I ran Tsukuba at once, but it was easy to run.
There is the same R600 in the same class and the distance between the cars is getting shrunk by BackStraight.
By the way, my weight was 10 kilos or more light seemingly light, my arms seemed to be good, and my age seemed to be young.
It is perfect for shrinking Time cheaply.
Although I set 15 this time, I thought that I would like to try 14.
Afterwards, I think that it is better to chow the Automatic shifter together because the climb rising faster.
I also asked for it together, but it is still in stock because it is said that it takes 1 month and a half for delivery without inventory.View Detail
Fits: KAWASAKI W400 06-08, KAWASAKI W650 04-08, KAWASAKI ZEPHYR750 01-06, KAWASAKI ZEPHYR750 90-94, KAWASAKI ZEPHYR750RS 01-06
I bought it as a reliable Brand over OEM Product. Although it is a plain part, I think it is a very important part in driving safety. If so, Cost performance is high. It's nice to understand Manufacturer's website.View Detail
Fits: KAWASAKI W400 06-08, KAWASAKI W650 04-08, KAWASAKI ZEPHYR750 01-06, KAWASAKI ZEPHYR750 90-94, KAWASAKI ZEPHYR750RS 01-06
I purchased it for FrontSprocket of 2010 formula ZX - 10R.
NORMAL is 17T, but I changed it to 16T of 1 DOWN to make it more important for acceleration.
Three companies that are selling FrontSprocket of this size are SUNSTAR, XAM, AFAM, but as long as there is no car model and size not being sold, SUNSTAR of 100% OEM adoption among them is very high reliability , It becomes the first choice of purchase.
In fact, compared with 15T of AFAM which is rolling at home after purchase, its surface finish is AFAM (It does not affect the performance, but a little rust floated immediately after purchase) Unlike Black, it was dyed up, of course it was finished without rust and BALI, meat extract etc etc. Weight reduction has not been done, but you can feel a solid point of practical utility.
It can be attached to the car body sliding into the Spline of the Drive shaft, and the tool precision is also very high.
Regarding durability, most of Motorcycle has been on the race (There are a couple of units) , Its durability is exactly the same as OEMSprocket etc.. It is confirmed that the performance is good in Aftermarket parts, but it does not apply to theory that it is inferior in durability.
I will continue to buy SUNSTAR as the first candidate as long as there is a size that matches the purchased MotorcycleView Detail
Fits: KAWASAKI W400 06-08, KAWASAKI W650 04-08, KAWASAKI ZEPHYR750 01-06, KAWASAKI ZEPHYR750 90-94, KAWASAKI ZEPHYR750RS 01-06
I installed it on the DAYTONA 675 I ran 70000 kilometers.
This time I exchanged Rear sprocket and Chain, so I also exchanged Front for the first time.
Usually I was worried what was going on because it was covered with Cover and the contents can not be seen, but I opened it and I did Big.
I was going to replace it for 70000 kilometers afterwards and it was like this. It is frightening when I think now that I ride in such a form often. You should protect the exchange Cycle properly.
The OEM has a Ring of Rubber around it, while the MADE IN SUNSTAR I purchased is like a simple gear without Rubber.
It is a mystery what role Rubber plays
Even if there is nothing, I attach it without trouble, even if I run, there is no interference and there seems to be no problem.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.