舒適的騎行是由舒適的姿勢創造的
你有沒有想過為什么你的自行車的車把不能調節?你有沒有想過,為什么車把不能調節?汽車在設計上,為了舒適駕駛,車把和座椅位置的調整是理所當然的。
不過,以摩托車為例,大多數車型的座椅位置甚至車把位置都無法改變。
要想找到合適的車把位置,就要從眾多廠家的車把中找到適合自己的車把。
雖然這本身就是一件很麻煩的事情,但除非你實際試戴,否則很難確認車把是否適合自己,而且安裝車把也要花費不少功夫。
摩托車的車把位置對轉向的影響比汽車大。
當你找到適合自己的車把位置時,你就能比以前更輕松地操控自行車。
我們的理念是開發舒適的摩托車騎行零件。
你需要做什么才能找到最適合自己的車把位置。
我們的結論是,不是要做很多不同種類的手柄,而是要做一個可以改變位置的手柄。
提示是自行車的車把。
高度和寬度必須可調。可以作為提示的可調式自行車車把的開發一直是個難題。
給我提供線索的是一位工作人員騎着自行車去上班。我們工作人員騎的是一輛單速自行車,車把高度可調。
雖然自行車和單車的結構不同,但組成自行車的部件是相似的,我們認為可以調節車把高度的機構也可以用在自行車部件上。
我們從零開始設計了一種新型的車把
受自行車車把的啟發,加快了開發速度。
由於我們開發的這個手柄與現有手柄的概念完全不同,所以我們從頭開始畫了一個樣板。樣品安裝完畢,經過測試,可以從運動型位置調整到放松型位置。
手柄采用輕巧結實的鋁合金材質。
鋁是用一種豪華的材料雕琢而成的,在相同體積的情況下,鋁的重量約為鐵的1/3,在同樣的力的作用下,鋁的變形比鐵小。
采用不銹鋼螺栓固定機器,因為它耐腐蝕、耐生銹。
三種調節機構,滿足不同的轉向感覺
32mm高度調節
手柄的高度可以在32mm的范圍內上下調節。
最上層和最下層的感覺差別很大,很難相信它只有32mm。
安裝在最低位置時,根據車型的不同,略微前傾,屬於運動型位置。
另一方面,如果把它放在最上面,就變成了一個輕松的姿勢,連我這個短胳膊的人都能承受。
手柄的寬度可調整約22mm
根據開關盒的寬度不同,手柄的寬度也不同。
由於是單邊22mm,如果同時調整兩個手柄,就會有44mm的調整范圍。
如上所述,最寬的車把寬度與最窄的車把寬度相差只有44mm,但裝在大車上的轉向手感卻完全不同。
方向盤的安裝角度可以從直線調整到更窄的角度,不影響車輛行駛。
由於車把的角度對車把的寬度和位置有很大的影響,所以只要稍加調整,轉向的感覺就會有很大的變化。
又是一次愉快的計算錯誤,我並不打算這樣做。
雖然不是刻意為之,但通過反過來安裝車把夾,可以使車把寬度比我想象的要窄。
對於每天都要在狹窄道路上開車的人來說,這是最好的位置。
Comfortable ridingg is created by a comfortable position
Why can't you adjust the position of the handlebars on your bike?Have you ever wondered thatCars are naturally designed to allow you to adjust the position of the steering wheel and seat for a comfortable driving experience.
However, in the case of motorcycles, you cannot change the seat position or even the handlebar position in most models.
In order to find the right handlebar position for you, you need to find the one that suits you best from among the many handles sold by different manufacturers.
It is difficult to confirm whether the handlebar is suitable for you without actually installing it, and it takes a lot of effort to install it.
Compared to a car, the handlebar position of a motorcycle has a greater effect on the handling.
Once you find the right handlebar position for you, you will find it much easier to handle the bike.
World Walk's philosophy is to develop parts that make your motorcycle more comfortable to ride.
What you need to do to find the best handlebar position for you.
World Walk concluded that it is not to make many kinds of handlebars, but to make handlebars which can change the position.
It was the handlebars of the bicycle that was the clue
Because the position cannot be adjusted with a standard handlebar, this completely new shaped one has been considered.
It must be able to adjust the height and width.After a lot of research, there were no adjustable bike handles on the market that could give us a clue, and development was difficult.
At that time, World Walk got a hint from a bicycle that a staff member rode to the office.Our staff rode a single speed bike with a handlebar that could be changed in height.
Although the structure of a motorcycle and a bicycle is different, their parts are similar, and the mechanism to adjust the height of the handlebar of a bicycle can be applied to the parts of a motorcycle.
World Walk has designed a new type of handlebar from scratch
The development speed was accelerated by the hint of the bicycle handlebar.
This handlebar was developed with a completely different idea from existing products, and it required to draw a drawing from scratch and produced a sample.The position can be adjusted to fit you perfectly because it can be adjusted from sporty position to relaxed position.
The handlebar is made of aluminum, which is lightweight and strong.
It is made of aluminum, which is 1/3 of the weight of steel and deforms less than steel when the same force is applied.
The screws used for fixing are stainless steel bolts, which are less likely to corrode or rust.
Three adjustment mechanisms change the handling feel
32mm adjustable in height
The height of the handlebar can be adjusted vertically within a range of 32mm.
The sensation of wearing it at the top and at the bottom is so different that it is hard to believe that it is only 32mm.
If you install it at the lowest position, you can lean forward slightly and have a sporty position.
On the other hand, the uppermost position is more comfortable and roomy for riders with short arms.
Handlebar width can be adjusted by approx. 22mm
The range of adjustment varies depending on the width of the switch box, but it can be adjusted by about 22mm.
If both handles are adjusted, the adjustment range will be 44mm.
The difference between the widest handlebar width and the shortest is 44mm as mentioned above, but when mounted on a larger bike, the handling feel is completely different.
The angle of the handlebar can be adjusted
The angle of the handlebar can be adjusted from straight to narrow without interfering with the vehicle body.
The angle of the handlebar greatly affects the width of the handlebar and the position of the handlebar, so just a small adjustment will make a big difference in the steering feeling.
In addition, there was an unintended happy miscalculation.
The handlebar width can be made even narrower than expected by mounting the handlebar clamps on the left and right sides of the bike.
This is the best position for those who have to ride on narrow roads on a daily basis.