- 安全帽(頭盔)
- Pin Lock
- WINS
- WINS - Pin Lock
- 商品列表
- FOGWIN(防霧鏡片)
FOGWIN(防霧鏡片)
Product # W-1217-4560385763090
178.38 HKD (3,450 日幣)
定價 178.38 HKD 节省 0%
+35 Webike點數 (1.8 HKD)
此商品已停售. |
Product # W-1217-4560385763090
178.38 HKD (3,450 日幣)
定價 178.38 HKD 节省 0%
+35 Webike點數 (1.8 HKD)
此商品已停售. |
Fits: その他 X-ROAD WINS, その他 MODIFY WINS, その他 A-FORCE WINS
There is no problem in normal use except that it is hard to stick it on I had a hard time aligning the position of the Visor with my field of vision when I was applying it When I put it on, it interfered with the opening and closing of the Visor I had to make some fine adjustments while applying it
I'd be lying if I said it doesn't fog up at all, but as long as you're driving, it won't fog up and reduce visibility It was
The problem is that when using the product in the rain, rainwater gets in between the product and the Visor, and it's hard to wipe it dry It was difficult for me because of the lack of
If you apply it twice or thrice, it may weaken GelView Detail
Fits: その他 X-ROAD WINS, その他 MODIFY WINS, その他 A-FORCE WINS
The helmet is SHOEI QWEST
Originally used a SHOEIBrand PINLOCKShield as a clear shield, and
Then I bought a Mirror shield and replaced it
It worked for a year, but after two years it was cloudy due to poor adhesion of the Silicon part
FOGWIN which was a good impression when using one of the previous WINS-made Helmet
I decided to use it for SHOEI QWEST
That's because the FOGWIN Silicon part was very close to the silicon part
Cut the dotted line on the flyer at the motorcycle mass merchant for size to Shield I matched it
The SHOEI QWEST of the Full Feis Helmet is
For Jet helmet (F−03)
I also installed it to match the size of the flyer
Size for Jet helmet, no problem (SHOEI CW−1Size)
When I actually used it, I found that even if the Shield part without FOGWIN is cloudy, it is still a good idea to use it
The Shield part of the FOGWIN is not cloudy at all, as a matter of course
The difference in the thickness of the silicon part makes it more durableView Detail
Fits: その他 X-ROAD WINS, その他 MODIFY WINS, その他 A-FORCE WINS
I added UniversalStandard to OGK's feed.
Until now, I used an anti-fog Spray, but it was not very effective.
A feed is not Pin lock compatible, I tried sticking this item.
Probably it was not possible to position with one time, but it is safe because you can reposition it.
First of all it is recommended to download the paper pattern with Manufacturer HP and check the Size.
Depending on the place to paste, there were places where I could get caught up and down by Shield, but I found a place that I could not get caught a few times.
I felt like I thought I was stuck with this, but I think that Large is durable because it will not cloud even if I breathe in..
If you are in your own field of vision, you can use it without any problems, but paste it (Stick it) Some people may not fit depending on the position.
Product seems to be a consumable item at once.
The accent of acetic acid or the smell of Film is a bit tight.
Shield is not cloudy but since Glasses is cloudy we have to do something.
View Detail
Fits: その他 X-ROAD WINS, その他 MODIFY WINS, その他 A-FORCE WINS
It was attached to MODIFY.
The function of anti-fog function was consistent with Pin Lock Seat and it was saved in winter.
However, Seat's adhesive is troublesome
Because the part of the adhesive is thick
When opening and closing the shield
Seat interferes with Helmet.
There were many times that it took time to open and close the Shield because of this.
Even when looking at Mirror, the part of the adhesive enters visibility and it is quite an obstacle.
There are times when the installation position can be freely determined,
If you get in a bad position, this also interferes with Helmet
You can not open or close the shield.
After all, opening and shutting Shield was annoying, I removed Seat.
If the adhesive surface is made as thin as possible, making it unnoticeable
As I think that it will be easy to use,
I want to expect improvements around here.
View Detail
Fits: その他 X-ROAD WINS, その他 MODIFY WINS, その他 A-FORCE WINS
With the cold in the morning, the field of view from the Full face Shield will become cloudy with breath and disappear. Therefore, Shield is a full opening. I was opening a little when I was running. When Speed ??goes up, it will get out by wind pressure. As speed slows down, it starts to cloud faintly, so I also ran a little Shield and ran running.
However, after sticking the fogwin on the shield, it is completely cloudy, with good visibility and comfortable. I knew the sort of phrase for publicity, but when I actually use it it really is not cloudy. I think that it is an essential item for Helmet of Full face. The price is reasonable, I recommend.
I do not want to get in the way, so it's a feeling. Although I do not know how it is in summer, it is in a state that we can not separate for the time being.
It is hard to understand in the picture, but over 80% of sight is occupied by Fogwin Seat.
Be sure to purchase even if adding Helmet. It is super recommended..View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.