這是一款 "輕量化、高剛性 "的三方形搖臂。
擺臂采用鋁制7n01材料,相對於原廠擺臂4.8kg的重量,擺臂重量僅為2.2kg,重量輕,剛性強。
三方管是三方管系列中最受歡迎的管子之一。
【擺臂處理】
。黑色陽極氧化處理(gCraft部件號:60198)
.Cerakote Finish (gCraft #60807)
【什么是Cerakote?】
CeraCoat是一種特殊的烤漆,目前美軍使用。
這是一種耐熱、耐磨、耐用、耐溶劑、散熱、隔熱等性能增強的塗料,經過測試,可以滿足最苛刻的條件。
陶瓷材料經特殊機器粉碎後,混入塗料中,以提高漆膜的強度。這使表面有類似珍珠皮的表面處理,但塗層可以很薄(25微米)
焊接痕跡(珠子)可以留在表面而不被隱藏。
附着力在所有的塗料材料中是最高的,即使彎曲也不會起皺,即使是墊腳石也不容易掉漆。
*正常交貨時間為3-5周。
【方案1】【方案1】懸架懸架規格(gCraft零件號:60057)
無連桿式的擺臂垂直調節范圍為7.5mm。
【方案2】【方案2】樞軸部分軸承規格(gCraft零件號:60006)
軸套的樞軸部分改為標准軸承。
實現了耐用性和平穩運行。
【方案3-1】拉鏈工藝
ow型拉鏈工藝(gCraft零件號:60014)
這是三方型的方案。
錐形面板移動以消除垂直錯位。
後拉式(gCraft Part No. 60221)
後拉式調整器的設計是為了消除調整鏈條的麻煩。
由於調整螺母位於擺臂的末端,所以很容易調整調整部分,原來由於工具的干擾,很難轉動。
【方案3-2】立鉤底座的附加改造
立鉤底座(m6)的改造(gCraft部件號:60903)
可安裝gCraft立鉤或外置立鉤(m6)。
三方鏈拉(標准)改為賽車立鉤。
歐式(gCraft編號:60188)
三方鏈拉歐式改為賽車架鉤規格。
【方案4】【方案4】鏈條滑塊用螺栓固定(g-craft零件號:60228)
鏈條滑塊由鉚接改為螺栓固定。磨損後容易更換。
【選配5】加裝擋泥板支架(g-craft零件號:60808)
加裝一個支架來連接原廠後擋泥板。
支架用螺栓固定,可以拆除。
Light weight, high rigidity, triple square swingarm.
The swingarm is made of aluminum 7N01 material and it weighs 2.2kg compared to stock swingarm 4.8kg.
The triple square pipe is one of the most popular pipes in G-Craft, and has a light weight and high rigidity due to its different shaped cross section.
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Option 1] Suspension support for dampers (G-Craft part number: 60057)
The Linkless Swingarm can be adjusted up or down by 7.5mm.
[Option 2-1] Chain pull processing
OW type chain pulling process (G-Craft Part number: 60014)
This option is only for Triple Square Type.
The tapered frame moves to eliminate vertical misalignment.
Chain pull frame Rear pull type (G-Craft part number: 60221)
These adjusters are designed to eliminate the need for maintenance when adjusting the chain.
Since the adjusting nut is located at the last part of swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference with tools.
[Option 2-2] Additional processing of stand hook base
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
Racing stand hook specification (G-Craft part number: 60186)
The triple square chain pull (standard) is changed to the racing stand hook specification.
Racing stand hook specification (OW type) (G-Craft part number: 60188)
Triple square chain pull OW type will be changed to racing stand hook specification.
[Option 3] Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 4] Additional fender bracket (G-Craft part number: 60808)
Add a bracket so that the stock rear fender can be installed.
The bracket is bolted and can be removed.