碳纖維油氣回收罐
Product # 616-1432200
906.26 ~ HKD (17,520 日幣)
定價 999.37 HKD 节省 最多 9%
+175~ Webike點數 (9.05 HKD)
當訂單成立時,我們將確認製造商的庫存並透過e-mail發送確認出貨時間給您。
匹配
- glomJC61-1000001-1299999
- glomJC61-1300001-
- glomEngines up to JC61E-1000001-1304754
Product # 616-1432200
906.26 ~ HKD (17,520 日幣)
定價 999.37 HKD 节省 最多 9%
+175~ Webike點數 (9.05 HKD)
匹配
油氣回收罐螺絲尺寸:Φ63×115mm
容量:220ml
※圖片僅供參考。
※引擎號碼JC61E-1304755-之原廠右側曲軸箱蓋無法安裝使用。
※示意圖中可能包含其他式樣之商品。
改裝引擎的必備零件,油氣回收罐。
可將引擎內妨礙活塞作動之壓力自通氣管排出,有效降低動力流失與引擎溫度。
同時可確實將排放出之油氣回收再利用。
Model Page Links
Fits: HONDA glom Engines up to JC61E-1000001-1304754, HONDA glom JC61-1300001-, HONDA glom JC61-1000001-1299999
* About quality and texture, The aluminium catch tank is a perfect size at 220ml for the Monkey but the carbon wrap finish may not suit everyones styling.* About the feeling of use, I am very happy with the position this catch tank can be mounted to fill some of the space left once the OEM airbox is removed and the fully contained system does a great job venting but unsure how effective it is putting any of the oil mist back into the engine due to the mounting angle.* Products to buy together, If you are adding this product due to performance upgrades then the Kitaco clutch cover is one to purchase also.* Difficulty of installation, The included steel tank bracket is mounted directly to the frame and everything attaches after that. The process was completed in 30 minutes with no difficultly.* Cost performance and comparison with other products, There are cheaper catch tank setups available but not one that also vents to and from the clutch cover, so this is a better product for the money.* About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, The bottle cap included is suitable for the OEM clutch cover and the Kitaco clutch cover but not the SP Takegawa clutch cover. Use the product reviews to assist in making a decision on your purchase.View Detail
Fits: HONDA glom Engines up to JC61E-1000001-1304754, HONDA glom JC61-1300001-, HONDA glom JC61-1000001-1299999
When I was driving an APE, I had installed their big tank, but the dimensions were not right or there was a gap, so I lost faith in KITACO after that.
This time, three companies, Mukawa, KITACO, and Endurance, were offering Catch tanks, but for the reasons mentioned above, I decided to avoid KITACO and went to Mukawa, but it seems that Mukawa did not have it in stock, so I decided to go with Endurance, but PLOT offered it to me. Order in." We had no choice but to choose KITACO because we were contacted by the company.
The "look is good.
Capacity is 200 ml.
No problems with installation for now.
Hopefully the emulsification of my chronic illness will be somewhat better.View Detail
Fits: HONDA glom Engines up to JC61E-1000001-1304754, HONDA glom JC61-1300001-, HONDA glom JC61-1000001-1299999
I forced myself to install it on a MONKEY125 Exhaust System Up Type The result is not immediately apparent, so I have to rate it as 3 Installation is very easy if you follow the instruction manualView Detail
Fits: HONDA glom Engines up to JC61E-1000001-1304754, HONDA glom JC61-1300001-, HONDA glom JC61-1000001-1299999
What made you decide the purchase?】
Since Blowby leaves two places, I thought that it would emulsify from Endurance's Oil catch tank? I replaced it. Since it is not yet winter, the effect is later.
【How was it actually used?】
I could mitigate the emblem much more than the Endurance's thing. Is it still an advantage to get out of two places.
After that, in winter it was good at Endurance and water was accumulated in Large quantity, so it would be better if the effect got better in 2 places.
【Was it difficult to install? (Hard parts case)】
Installation is simple. Quantity of Clutch cover : Remove 2 pc and pinch Mounting Hardware. After that fix the tank to the gold tool. Connect Hose and you are done..
【Please tell me the point of installation and hang (in the case of Hard parts)】
Please note the threading of the Bolt on the Clutch cover for installation. It is loosened tightening at 10 nm.
If you put too much force, it will easily thread out.
[Is there anything I was disappointed about?]
I knew it, but it is a hassle to undo Hose once you open the Oil slot.
And it is difficult to remove Body's Clamp.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I would like to make Body easier to remove.
Oil Filler Cap is also perfect if you can take it without removing Hose.
【Have you compared items?】
Origurally used Endurance Oil catch tank.
[Others]
I do not know if it will be an emulsification countermeasure yet in winter, but mitigation of the emblem was quite effective.
It looks better than the Silver color of Endurance, it gained a sense of unity with the engine and it became very good.
The price is a little expensive, but it is a product with a high level of satisfaction.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.