短散熱片型
消費電力:30w(遠光)/30w(近光)
額定電壓:dc12v
色溫:6000k
cree公司製led芯片使用
防水冷卻風扇採用
除車型外,不能安裝。
【警告】
※根據使用說明書正確安裝設備。不正確的安裝將導致火災。它可能會導致故障。
※在安裝前,請務必取下電池負極側的端子線,並確認鑰匙已關閉。<請勿觸摸或玷污LED芯片。污垢的附着可能會導致LED芯片因發熱而燒毀。
※本產品為精密儀器,操作時應十分小心。不要摔倒或強行拉線。操作不當可能會造成故障、受傷或燒傷,並可能導致危及生命的事故。此外,要小心,因為火花和有缺陷的絕緣材料會引起故障和車輛火災。<本產品的拆解。不要對數據進行任何修改。分解:我們對改裝後的產品不提供任何保證。<不要直視大燈的LED燈。它可能會導致視覺障礙。<在關燈期間和關燈後,請勿將水濺到鏡頭上。溫度的突然變化可能會導致透鏡或LED燈泡的損壞。由於溫度過高,請勿觸摸閥門後部的散熱片和控制器單元。
【注意】
*本產品設計用於`12v直流(dc)負公共模式。接線時一定要用dc12v電源。
。小排量車常見的AC(交流)照明系統,請勿在車上安裝本產品。
。負極共用是指大燈接線的負極側與鹵素燈側共用的類型。加普通大燈系統與本產品不兼容。
迷你自行車套件
迷你自行車套件是專為使用 "12V DC""AC""無電池""負公共""加公共 "*的摩托車設計的。
(*1.當使用拆下電池的車輛時,請務必使用選配的adc-200(65016)無電池套件)。
(*2.負極共用是指大燈接線的負極側與`hi梁側和lo梁側共用的類型。)
(*3.大燈指的是一種大燈,其正極側的接線與'喜'和'樂'的光束側都是共用的。)
※本產品僅供摩托車使用,不能用於四輪車。<請勿用紙或布覆蓋,也不要在易燃物附近點燃。它可能會引起火災或異常加熱。請勿在易燃物附近點燃,如易燃噴漆稀釋劑或其他可能點燃的易燃物。<請勿在點亮狀態下安裝大燈。否則可能導致故障或燒毀。
※本產品為日常使用的防水產品,但並非完全防水。用乙烯膠帶或自粘膠帶將控制器單元耦合器包起來,或用填縫劑防水。不要用超過必要的水潤濕它。
※用高壓清洗機洗車時,不要讓高壓清洗直接撞擊產品。<請勿跌落或強烈撞擊LED燈泡或控制單元。不僅會損害或降低性能,還可能造成傷害。
*當組裝LED燈泡時,請務必使用附帶的硅脂。詳情請參考本手冊。<關燈或開燈時,請勿觸摸LED芯片。<不要蓋住防水冷卻風扇。確保風扇後面有足夠的空間讓空氣流動。
※安裝時指定防水冷卻風扇的方向。安裝時一定要將銀色圓形密封圈朝外。<使用螺紋鎖固劑,防止螺紋部位的松動。另外,請定期重新擰緊。
※安裝需要專業的知識和技能。請到指定的維修機構,由熟練的技師進行維修。
※使用前對准光軸。它可能會阻礙對向車輛的視線,造成交通事故。詳情請參考《道路車輛安全標准》。
*因使用本產品而引起的故障。因意外事故造成的損失,我們不承擔任何責任。此外,本公司不負責本產品的安裝、拆卸等維修費用。先謝謝你的理解。
※如果在安裝或使用過程中感覺到任何異常,請聯系Protec, Inc.的服務部門。
【符合汽車檢驗法的說明】
※本產品是作為符合汽車檢驗法的產品銷售,但這只是針對最大發光強度和色溫。產品安裝後,請務必使用與 "led"(新光源)兼容的檢查機調整光軸。由於光軸調整的缺陷或隨着時間的推移而導致的光透鏡的維護缺陷,我們不承擔任何責任。
Short heat sink type
Power consumption: 30W (Hi beam) / 30W (Lo beam)
Rated Voltage: DC12V
Color Temperature: 6000K
Use of LED chips made by CREE
Waterproof cooling fan
*This product can not be installed on other models.
*This product cannot be installed on SUPER CUB 110 PRO.
[warning]
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF.
*Please do not touch or get the LED chip dirty.Dirt can cause the LED chip to burn due to heat being built-up.
*Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens or LED bulb.In addition, please do not touch the LED bulb itself, the heat sink behind it, and the controller unit because they get to the high temperature.
[Notes]
*This product is only for 12v DC minus common.Be sure to use DC12V as the power source for wiring.
*The negative side of the headlight wiring is the same for both Hi and Lo beam.Not compatible with vehicles with positive common headlights.
*As to minibike kits
The kit for minibikes can be used with 12V DC, AC, battery-less(*1), minus common(*2), plus common(*3) motorcycles.
(*1. Please use ADC-200 (65016) Battery-less Kit (sold separately) when you use it on a vehicle with the battery removed.)
(*2. "Minus common" refers to the type where the minus side of the headlight wiring is common to both the Hi beam side and the Lo beam side.)
(*3. "Plus common headlight" refers to the type in which the positive side of the headlight wiring is common to both the Hi-beam and Lo-beam sides.)
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*Be sure to apply the included silicone grease when assembling the LED bulb.Please refer to this manual for details.
*Do not touch the LED chip when it is off or on.
*Do not cover up the waterproof cooling fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*The waterproof cooling fan has a specific orientation for installation.Be sure to install with the silver round seal facing outward.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact PROTEC Service Department.
After installing the product, be sure to adjust the optical axis using an inspection machine that is compatible with LED (new light source).PROTEC is not responsible for any dirt or clouding of the light lens, scratches, peeling of the reflector plating inside the light, or poor maintenance due to poor optical axis adjustment or age-related deterioration.