適合機種:iphone7plus
包裝尺寸:125×190×23mm
本體尺寸:82×163×10mm
重量:48g
【型號】
・kumamon 熊本熊型式:gkl-280kma
・摩托車型式:gkl-280bik
*本產品是專為iphone7plus設計的。
*本產品為鋁制,無線電波會阻擋在機身背面。有可能是接收性能稍差。
*本產品的設計不能完全保護您的iPhone免受沖擊等,請注意,我們不對您的iPhone的任何損壞負責,如破損、故障、數據丟失等。
*本產品是通過 "減震樹脂 "來防止外殼與iPhone接觸,但並不是為了防止iPhone被完全劃傷而設計的。
*Guild Design對因安裝本產品而造成的iPhone手機刮花概不負責。
*規格。外觀:請注意,包裝內的物品如有變更,恕不另行通知。
*請勿使用外置充電器,如耳機(耳機插孔直徑為8.5mm)。
*根據外貼膜的類型,有可能出現貼膜不浮的情況。
*在信號質量較差的地方,可能難以收到信號。如果你接收到的是正常的信號,就沒有問題。
*由於陽極氧化工藝的特點,每批產品都很難用相同的顏色來完成。我們一直在努力使本產品的顏色盡可能的一致,但由於陽極氧化工藝的原因,不同批次的產品顏色可能會有差異。
*本產品經過陽極氧化處理,所以在所謂的 "接觸點 "上不會有任何顏色的電流通過。箱子內側有兩處沒有上色,但這不是加工缺陷。
*我們盡量使產品照片接近產品的實際顏色,但顏色設置和您使用的電腦的顯示器。房間照明。根據陽光的照射,顏色可能會發生變化。
Compatible models: IPhone7Plus
Package Size: 125 x 190 x 23mm
Main unit size: 82 x 163 x 10mm
Weight: 48g
[model number]
・Kumamon model: GKL-280KMA
・Bike model: GKL-280BIK
*This product is specially designed for iPhone7Plus.
*Because this product is made of aluminum, radio waves will be blocked from the back of the main body.There is a possibility that the performance of receiving radio waves is slightly inferior.
*This product is not designed to completely protect your iPhone from shocks.We are not responsible for any damage to the iPhone, failure, loss, or loss of data.
*This product is designed to prevent the iPhone from contacting with the case by using shock-absorbing resin, but it is not designed to completely protect the iPhone from scratches.
*GILD Design is not responsible for any damage to the iPhone caused by installing this product.
*The specifications, appearance, and included products of the product are subject to change without notice.
*You may not be able to use aftermarket chargers or earphones (earphone jack is 8.5mm in diameter).
*Some types of aftermarket film may cause problems such as lifting of the film.
*It may be difficult to receive the signal in the place where the signal condition is not good.If you are receiving a normal signal, there is no problem.
*Due to the characteristics of the anodizing process, it is difficult to finish the same color for each lot.We try to keep the same color as much as possible, but due to the anodizing process, the color may vary from lot to lot.
*Because this product is anodized, the contact point where the electric current passes through is not colored.There are two points on the inside of the case that are not colored, but it is not a defect in processing.
*Although we have made every effort to make the product photos as close as possible to the actual color of the product, you may notice a change in color depending on your computer monitor, color settings, indoor lighting, sunlight, and other factors.