全款改款,規格可以從7種顏色和6種尺寸中選擇最好的一款。
防霧罩。新的通風系統。超酷內飾等功能的加入,使其使用起來更加方便。
此外,可選擇使用舒適襯墊和頰墊的不同組合,以達到最佳貼合效果。
從通勤到旅游,你可以期待在廣泛的情況下使用它。
。全尺寸設置(xs-xxl的6個尺寸)*部分顏色不包括在內
。伸縮式直接通風
。光滑的內底形態,可順利去除
。適合城市駕駛的柔軟貼身內褲
。耳朵周圍的揚聲器空間
。標配了適用於所有天氣條件的輕型防煙罩
。防霧盾牌,防止盾牌起霧
。盾牌支架,防止駕駛時盾牌的響聲
。不銹鋼一鍵式下巴帶
【特點】
。通風系統
采用空氣動力學設計,在頭盔後部產生大面積進氣孔和負壓,使進氣性能提高了+6%,排氣性能提高了+51%(與上一代車型相比)。
。空氣動力學設計
通過對騎行時頭盔周圍的氣流進行深入分析,"升力阻力系數cl值(向上升力系數)"比傳統模型降低了14%,"阻力阻力系數cd值(推力系數)"降低了3%。空氣動力學設計通過控制風的流向,產生 "清空 "效應,對減少騎手疲勞做出了重要貢獻。
【特色】
.雅馬哈頭盔首次采用防霧罩
雅馬哈頭盔首次采用防霧罩。防護罩上的特殊塗層覆蓋面積廣,能提供良好的視野和舒適的騎行環境。
。輕巧緊湊的帽身
纖細的帽身設計,盡量減少通風部件等突出部分,使其輕巧緊湊。
*根據滑板車存放空間的形狀,在某些情況下可能無法存放滑板車。
。一鍵式搭扣下巴帶
不銹鋼一鍵式搭扣下巴帶易於安裝和拆卸,即使戴着騎行手套也可以。
。盾牌支架
盾牌支架可以防止駕駛時盾牌變形或晃動。
【內參】
.舒適內膽的選擇。臉頰墊的最佳貼合度
根據用戶的頭型和喜好進行細節調整。舒適襯墊(單獨出售)。您可以從 "標准型"、"緊型 "和 "松型 "三種不同類型的頰墊中選擇。標准尺寸在銷售時安裝。讓每一位顧客都能擁有舒適的最佳試穿效果。另外,接觸皮膚的材質是超酷面料,速干性和抗菌性都很好,穿起來很舒服。
。采用眼鏡縫隙。舒適貼合,即使是戴眼鏡的人也能舒適貼合。
眼鏡的縫隙可以使眼鏡和太陽鏡的佩戴順暢,消除對鏡架的壓力。縫隙寬度大,可適用於從金屬框架到鋼框架的各種框架。
。平滑的可拆卸內形
內底形的大開口可拆卸頭盔,使頭盔順利插入和拆卸。
。舒適的耳部空間
耳部區域的設計,讓耳朵周圍有更大的空間。
*揚聲器的最大直徑為50mm。
Fully remodeled with 7 colors and 6 sizes to choose the best one.
Anti-fog shield, new ventilation system, super cool interior, and other features have been added to make it easier to use.
In addition, various combinations of comfort liners and cheek pads (sold separately) can be used to achieve optimal fitting.
You can expect to be active in a wide range of scenes from commuting to touring.
・Full size setting (6 sizes from XS-XXL) *Except for some colors
・Open / Close type direct ventilation
・Smoothly removable inner bottom form
・Soft fit innerwear optimal for urban riding
・Speaker storage space around the ear
・Light smoke shield for all weather comes as standard equipment
・Anti-fog shield to prevent fogging of the shield
・Shield holder to prevent rattling of shield in riding
・Stainless steel one-touch chin strap
[Features]
・Ventilation system
The large intake hole and the aerodynamic design that generates negative pressure at the rear of the helmet have improved the intake performance by 6 percent and the exhaust performance by 51 percent (compared to the previous model).
・Aerodynamic design
By thoroughly analyzing the air flow around the helmet during driving, the lift coefficient CL (coefficient of force to lift upward) was reduced by 14% and the air resistance coefficient CD (coefficient of force to be pushed) was reduced by 3% compared with the conventional model.The aerodynamic design controls the flow of wind and has a rectifying effect, which greatly contributes to reducing rider fatigue.
[Function]
・Adoption of anti-fog shield
A special coating is applied to the inside of a shield to prevent fogging for the first time in YAMAHA helmets.Special coating is applied to a shield over a wide area to keep good visibility and realize comfortable riding environment.
・Lightweight and compact shell
The slim cap design and the minimization of protruding parts such as ventilation parts have resulted in a lightweight and compact cap.
*Storage in a scooter may not be used depending on the capacity and shape of the scooter's storage space.
・One-touch buckle chin strap
Stainless steel one-touch buckle chin strap for easy removal even when wearing riding gloves.
・Shield Holder
A shield holder is adopted to prevent deformation and rattling of a shield during driving.
[Interiors]
・Choice of comfort liner and cheek pads for optimal fitting
The shape of the user's head and the user's preferences are met in detail.The comfort liner and cheek pads (sold separately) can be individually adjusted in three ways: "standard", "tight" and "loose".The standard size is installed at the time of sale.It is available for each customer to have an optimal fitting for a comfortable fit.In addition, the fabric material that touches the skin, a comfortable fit is realized by adopting a super cool fabric with excellent quick-drying and antibacterial properties.
・Slits for glases is used.Comfortable fit for riders wearing glasses.
The eyeglass slit allows for smooth fitting of glasses and sunglasses and eliminates pressure on the frame.In addition, by setting the slit width wider, it is compatible with a wide range of glasses including metal and steel frames.
・Smoothly removable inner form
Smooth helmet detachability was realized by adopting inner bottom form that a detaching part becomes a large mouth shape.
・Ample space around the ears
It is designed with a space around the ear in advance to give more room around the ear.
*It can hold speakers with the diameter size upto Φ50mm.