160.61 HKD
(3,105 日元)
153.63 HKD
(2,970 日元)
(
4% 折扣
)
5 (2 評論)
Very Good
To BW 'S 125 SEA 6 JI inadvertently dropped the Tire and had a hard time restoring it
If you carefully work Large is strong.
What is the effect if you try rolling?.
Reviews For KOSO KOSO Universal Axle Slider [Blue] From Other Webike User
Excellent
Good size for 125CCScooterI have installed it on PCX, NMAX and MAJESTYS
I have installed a similar product from another manufacturer before, but the outer diameter is Large I felt the balance is a little too big for the 125CCScooter
This Manufacturer is happy with the size that fits the balance of the look of the Balance just right! It is In addition, if you install it at the same time as the Rear Exhaust Guard, the Manufacturer will also be able to The shape is perfect to match
If only the resin Cap of GuardBody was a Repair item afterwards
If I ever get a scratch, I'll have to buy it from AssemblyView Detail
Most Viewed Reviews Of KOSO Axle Slider
Excellent
I can guard it well.It is used for CYGNUS X2 model.
The Axle Shaft does not interfere with the ground on Scooters because the front fork is short and the cowl sticks out in a low position.
Since I had replaced the shaft with the Chromoly Axle Shaft from Other Brand Product, I had enough room to install the Axle Shaft Slider, but I think it is important to note that the length may not be enough for the OEMAxle Shaft.
When I used the thin nut supplied by another company, I sometimes licked the screw mount of the nut when I tightened it with the specified torque, so I did not use the supplied nut this time either.
When the mount base is installed, only the slider part can be replaced without having to remove everything.
Also, I think the Axle Shaft will be less likely to rust in the rain, etc. since it is completely sealed.
Since it has a shape that seems to have a high degree of universality, I think it can be used as a Frame Slider or Exhaust Guard in addition to the Axle Shaft Slider.View Detail
Very Good
Installed on MAJESTYS.UniversalAxle Slider installed. 。
I was worried that it would not be able to be installed properly because it is installed by inserting it, but it was large and strong. 。
The actual tightness of the installation is the Quantity:Pair (for Left and Right) Together, about 4.4? 。 If there is more room in the Axle Shaft, there will be no problem with installation. 。
MAJESTYS would have an extra turn and a half, so no problem.
Volume around the front is increased a little. 。
I scraped the bottom of my FrontCB400T when I was pushing and pulling the Limit near the wall, so I'm trying to prevent that!View Detail
Excellent
Good size for 125CCScooterI have installed it on PCX, NMAX and MAJESTYS
I have installed a similar product from another manufacturer before, but the outer diameter is Large I felt the balance is a little too big for the 125CCScooter
This Manufacturer is happy with the size that fits the balance of the look of the Balance just right! It is In addition, if you install it at the same time as the Rear Exhaust Guard, the Manufacturer will also be able to The shape is perfect to match
If only the resin Cap of GuardBody was a Repair item afterwards
If I ever get a scratch, I'll have to buy it from AssemblyView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING