77.3 HKD
(1,495 日元)
4 (10 評論)
Excellent
Cospa best. Tappet adjustment, adjustment of PointGap...Thickness Gauge near 2000 yen purchased previously...
I wet it in the rain and leave it as it is, it has made it rusty all the time. (Crying)
This time I chose this item with emphasis on COSPA.
Can be used without problems. It is a commodity that can correspond to many large shoes at this price range
Everyone, let's make the tools Large
Reviews For JETECH TOOL 厚薄規 (32pcs) From Other Webike User
Average
Cospa might be good0.It is possible to measure from 0.01mm, and it is good that it is possible to measure by the unit of 0.01mm by combining two pieces. I use it to adjust the valve clearance of my NC30.View Detail
Very Good
To adjust valve clearanceI bought it to adjust the Valve clearance on my ELIMINATOR 250
The EX250 Engine, which is also used in the current NINJA and VERSYS, is a mature engine After 60,000km, it started to make a nasty noise when idling and clattering
Thanks to this Gauge, it's now perfect and in good shape The size you need is not exactly the same as the size you need, but if you stack them up, it's not a problem Not at all
If I had to say, it's a little bit wide, so it's hard to get into the narrow IN cams, etc I even had a thought
Even TWIN is like this, so when you fiddle with InlineFour and other products, a slender, separate product You might want to chooseView Detail
Excellent
To the Grom Engine!The circumstances that led to the purchase of a Takegawa Sports Camshaft when it was installed and adjusted I bought Tappet Adjust together with Tappet Adjust to use it This is a gap adjustment using the Wrench Set The product consists of 32 Thickness Gages Uncalibrated adjustment values are selected from the 32 Thickness Gages and added together (e.g. 0.17 Adjustment 0.15+0.02 Thickness Gauge)View Detail
Average
Tappet adjustment, PlugGap adjustment - - - For each place adjustmentPurchased for SR 400's Tappet adjustment.
Also I used it before because I had rust and bending.
The deciding factor of purchase is the number of sheets and price!
At this price this number is not quite enough.
But - - I do not use it w
In addition, since it can be used for adjustment of PlugGap and measurement of various parts of Engine at Overhaul
Would it be better to have more sheets - -
At the time of opening, the root fasteners were loose and it was nearly RoseRose.
There is no problem when tightening again.View Detail
Very Good
It is a required toolI bought it to make Valve clearance adjustment
It's easy to use because it is set finely
While paying attention not to rust, I would like to use it for the Large thingView Detail
Most Viewed Reviews Of JETECH TOOL Other Tools
Excellent
JETECH TOOLSA device for measuring valve clearances from JETECH Tools. The device is very good. Repeatedly he helped me in measuring the gaps using different techniques.View Detail
Excellent
JETECH TOOL Thickness Gauge The item is very good! I did not regret what I bought. Many sizes to choose from. Made with very good stuff! Checked the gaps, everything correctly shows. I recommend this product !!! View Detail
Average
Cospa might be good0.It is possible to measure from 0.01mm, and it is good that it is possible to measure by the unit of 0.01mm by combining two pieces. I use it to adjust the valve clearance of my NC30.View Detail
Very Good
It is easy to useI bought it for Point and Tappet maintenance.
The 0.02mm was crumpled. It seems to be able to stand up to use somehow, but I wondered if this was a bad idea, even though it is a cheap one.
The oil-covered point is also annoying because it takes some time and effort to use.
Nevertheless, the cost performance is excellent, the measurements cover a wide area and the shape is very easy to use.
It's worth the price. It seems to be a problem for simple maintenance.
View Detail
Very Good
To adjust valve clearanceI bought it to adjust the Valve clearance on my ELIMINATOR 250
The EX250 Engine, which is also used in the current NINJA and VERSYS, is a mature engine After 60,000km, it started to make a nasty noise when idling and clattering
Thanks to this Gauge, it's now perfect and in good shape The size you need is not exactly the same as the size you need, but if you stack them up, it's not a problem Not at all
If I had to say, it's a little bit wide, so it's hard to get into the narrow IN cams, etc I even had a thought
Even TWIN is like this, so when you fiddle with InlineFour and other products, a slender, separate product You might want to chooseView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING