- Its a great product for nissin master cylinder , looks great and very attractive About quality and texture
About the feeling of use
Easy to install
Products to buy together
Buy together with nissin...閱讀更多 - 符合:
- YAMAHA Tricity155
- YAMAHA NMAX155
- HONDA CBR500R
- HONDA CB500X
- HONDA CB500F
- ...和更多.
This is an amazing upgrade over the stock spark plug NGK MR8E-9 for my Suzuki V-Strom SX!!
Gear shifts at low RPMs have become much more smoother. No more engine vibrations at low RPMs!
This has total...閱讀更多 - 符合:
- HONDA
- HONDA
The front sprocket was changed from 14T to 15T keeping the rear sprocket the same. No modification needed at all. This is a slot-in replacement.
The sprocket makes the power delivery in 1st and 2nd l...閱讀更多 - 符合:
- SUZUKI GSX1300R 13 A CLUTCH
- SUZUKI Hayabusa GSX1300R 12 CLUTCH
- SUZUKI Hayabusa GSX1300R 11 CLUTCH
- SUZUKI Hayabusa GSX1300R 09 CLUTCH
- SUZUKI Hayabusa GSX1300R 08 CLUTCH
The lowest price in internet that i found. I searched for 10 days and this is where it the OEM and also the cheapest one. The shipping prices are also reasonable. Thank you saved me a lot of time and ...閱讀更多 - 符合:
- DUCATI STREETFIGHTER V4 S
- DUCATI STREETFIGHTER V4
The slider quality is good. But I feel this slider design is flawed. It broke my engine case. I'm switching to EvoTech Performance Sliders. 閱讀更多 - 符合:
- HONDA CB650R 19-21
Got the original product as expected.
The package arrived ontime with express courier.
The item was really well packaged.
Good Job guys. Will buy again閱讀更多 - 符合:
- HONDA CBR1000RR-R SC82-1000001- CBR1000RR-R FIREBLADE ONLY
Used this on a CBR1000RR-R STD edition. Easy to fit plug and play type quickshifter, additionally you just have to activate the Quickshifter using a OBD tool otherwise it will not recoganize the quick...閱讀更多 - 符合:
- DUCATI SUPERBIKE Panigale V4 S 18-21
- DUCATI SUPERBIKE Panigale V4 R 19-21
- DUCATI SUPERBIKE Panigale V4 18-21
- DUCATI STREETFIGHTER V4 S 20-21
- DUCATI STREETFIGHTER V4 20-21
Received the product in good condition, good price, delivered on time. Really happy to have purchased from webike. Excellent support from webike team.閱讀更多 - Its an awesome racing visor which really looks great on RC .
Cost for shipping and customes was equal to the cost of the product. So it's costed me 10k+ approx to get it to India.閱讀更多 - 符合:
- DUCATI Scrambler Desert Thread [Front & Rear Set] [Rim Size] Front 19 x 3.00 MT & Rear 17 x 4.50 MT
I received a partially faulty kit - while the conversion for the rear went perfectly fine, the tapes for the front rim had has no adhesion strength, it is coming off the rim even with a gentle pull by...閱讀更多 - With their unmatched cashback strategy, Askmeoffers focus has been on customer retention and engagement as much as it has been on the acquisition. Build a relationship with the online commerce giant a...閱讀更多
- 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- その他 Universal
I bought this grip set for my 1980 CB650Z to replace the stock grips.
These grip are made in Taiwan.
The overall quality is superlative with a very clean moulding.
and the mouldings marks are ve...閱讀更多 - I bought it at a relatively cheap price of 300JPY
The body of the tape measure is plastic and made in Taiwan while
the tape inside is made in Japan.
The tape has two buttons on the body
1) Slide l...閱讀更多 - 符合:
- KAWASAKI Z900 (KZ900)
- KAWASAKI Z750-D1 (KZ750D) D1
- KAWASAKI Z750 (air-cooled) A5
- KAWASAKI Z750 (air-cooled) A4
- KAWASAKI Z10012VUniversal
- ...和更多.
This horn by Doremi Collection is a Nikko Horn.
There are two sizes available : Large and Small.
I bought the small horn and it is very good in fit and finish.
The connector thimbles are also qui...閱讀更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- その他 Universal
Excellent quality grips for 7/8 inch or 22.2 mm handlebars
The overall length of the grips is 125mm from edge to edge.
The rubber quality is excellent and the grip is very nice to use as the rubber ...閱讀更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- その他 Universal
Excellent quality grips for 7/8 inch or 22.2 mm handlebars
The rubber quality is excellent and the grip is very nice to use as the rubber is the perfect density.
The rubber casting quality is also ...閱讀更多 - 符合:
- HONDA CB500F
- HONDA CB400 FOUR F1 75-77 (air-cooled) 398cc
- HONDA CB400 FOUR F2 75-77 (air-cooled) 398cc
- HONDA CB400 FOUR F1 75-77 (air-cooled) 408cc
- HONDA CB400 FOUR F2 75-77 (air-cooled) 408cc
The unit is very well finished and plastic quality seems to be as good as the original.
In the box are:
1) pilot lamp top cover
2) pilot lamp bottom cover
3) screws for both lower and upper moun...閱讀更多 - Great quality rivets.
Stainless Steel shaft and aluminium body.
The rivet diameter is 4mm and can be used for materials upto 12mm thick.
Great quality for a good price!
閱讀更多 - 符合:
- HONDA CB350F
- HONDA CB400F 75-77 398cc
- HONDA CB400F 75-77 408cc
The title of the product page says BRC bulbs but the bulbs are made by Stanley and correspond to the Honda OEM Part No. 34902-259-000
At 100 JPY per bulb these are good value for money and cheaper co...閱讀更多 - The DR8ES-L is a 8.5 heat range plug, positioned between the DR8ES and the DR9ES.
The half heat range plugs aloow more fine tuning on older air cooled engines
The product description doesnt mention ...閱讀更多
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING