- 符合:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...和更多.
A bit longer than intended for the front caliper. Maybe the pin I received is for the rear. But it fits properly on the front caliper anyway.閱讀更多 - 符合:
- YAMAHA XJ6 DIVERSION 09 [Used in]Rear
- YAMAHA XJ6 DIVERSION 09 ABS [part used]Rear
- YAMAHA FZ6R 09 [Used in]Rear
- TRIUMPH DAYTONA675 08 [Used in]Rear
- TRIUMPH STREET TRIPLE 08 [Used in]Rear
- ...和更多.
I changed my 88 Honda Bros front brakes with these. Excellent grip for a decent price. I would recommend it.
About quality and texture: Excellent
About the feeling of use: My brakes became more ...閱讀更多 - 符合:
- HONDA CBR1000F 93-00
- HONDA CBR600F 92-98
- HONDA VFR750F 90-97
- HONDA VF400 83-84
- HONDA SL230 97-00
- ...和更多.
Works better than NORMAL.OEM Brake hose was too short to use.閱讀更多 - 符合:
- HONDA CB-1 89-91 [Used in]Rear
- HONDA CB400FOUR 97-00 [Used in]Rear
- HONDA BROS650 88-90 [Used in]Rear
- HONDA CB400F 13 [Used in] rear
- HONDA CB400F 13 ABS [part used] Rear
- ...和更多.
[How is it used?I ride it in various places such as city driving, commuting, mountain road touring, etc.Was the one you received as per Image?What you receive is just as you see on the Image.Was the i...閱讀更多 - 符合:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...和更多.
today i change the rear brake rotor and overhaul the caliper. the brake pin has seriously rusted and damaged so i cleaning all the surface of caliper and (not changed caliper piston...and Oring) and l...閱讀更多 - 符合:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...和更多.
First, let me say that this is a special case based on a combination of several conditions.After cleaning the Caliper, I put it back together, tightened the pad pin, and was finishing up by tightening...閱讀更多 - 符合:
- HONDA CB-1 89-91 [Used in]Rear
- HONDA CB400FOUR 97-00 [Used in]Rear
- HONDA BROS650 88-90 [Used in]Rear
- HONDA CB400F 13 [Used in] rear
- HONDA CB400F 13 ABS [part used] Rear
- ...和更多.
Replaced on a 16 year old HONDA400X. I mainly commute to work and ride around town, so I decided on this product after reading the impressions of many people. I was able to install it with only a litt...閱讀更多 - 符合:
- HONDA CBR1000F 93-00
- HONDA CBR600F 92-98
- HONDA VFR750F 90-97
- HONDA VF400 83-84
- HONDA SL230 97-00
- ...和更多.
Good quality. Very fast delivery. If anyone looking for some retro style, cool looking master cylinder, this is the right one. 閱讀更多 - 符合:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...和更多.
For those who want to upgrade with OEM replacementIt's hard to lick, hard to decay, and also cool.Recommended for people who ride Honda motorcycles, but be careful with the length.閱讀更多 - 符合:
- YAMAHA MT03 15-21 [Number of items used]6
- YAMAHA MT-10SP 17- [Number of units used]16
- YAMAHA MT-09 14-21 [Number of items used]12
- YAMAHA MT-07 14-21 [Number of items used]10
- YAMAHA MT-09SP 14- [Number of units used] 12
- ...和更多.
How far can we use it?I want to know the wear limit value.It was rattling, but I could use it if I wanted to.If you say it's a life-saving part, I'll replace it as soon as possible.I would like to see...閱讀更多 - 符合:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...和更多.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...閱讀更多 - 符合:
- HONDA CB-1 89-91 [Used in]Rear
- HONDA CB400FOUR 97-00 [Used in]Rear
- HONDA BROS650 88-90 [Used in]Rear
- HONDA CB400F 13 [Used in] rear
- HONDA CB400F 13 ABS [part used] Rear
- ...和更多.
[How is it used?NSR250R (MC18) Used in Rear.Application:Mountain pass, TouringReplaced with an OEM pad that I don't know how old it is.Was the one you received as per Image?Just like the image. The Re...閱讀更多 - 符合:
- YAMAHA XV1700 07-10
- YAMAHA XV1700 05-06
- YAMAHA X-City 08-10
- YAMAHA X-City 250 07-17
- HONDA
- ...和更多.
I suddenly see FCaliper.Brake Pads in F is almost over (LOL)So, I replaced the Pad.Vesla's Sintered, which was also put into the NINJA2 Helmet 50R.Basically, I don't use Brake very much (laughs).We do...閱讀更多 - 符合:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...和更多.
Rust resistant Material:Stainless SteelPad pin。It is a little bit longer for one push for Caliper, but it can be used as it is with OEM and replacement.Features easy maintenance and performance retent...閱讀更多 - 符合:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...和更多.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.Be sure to bleed the air and refill the fluid in the MASTER after replacement.Th...閱讀更多 - 符合:
- HONDA XL400VTRANSALP 92 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- HONDA ST1100ST1100 PAN EUROPEAN 00 [part used] Caliper side
- HONDA X4 97-00 SC38 [part used]Caliper side
- HONDA X4 97 SC38 [Frame No.]SC38-1000001 or later [Use part]Caliper side
- HONDA XL400VTRANSALP 91 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- ...和更多.
ZrX1200 DAEG OEMHydraulic Clutch Bleeder Bolt This Material:I replaced it with a Stainless Steel one. The OEM Bleeder Bolt is made of steel and will always rust over time, so it's best to replace it. ...閱讀更多 - 符合:
- HONDA CB400SF 92-96 [Used in]Rear
- HONDA CB400F 13 [Used in] rear
- HONDA CB400FOUR 97-00 [Used in]Rear
- HONDA CB400F 13 ABS [part used] Rear
- HONDA CB-1 89-91 [Used in]Rear
- ...和更多.
There is no complaint if it is from town riding to touring.閱讀更多 - 符合:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...和更多.
Used for KLX125Compared to the OEM, the screw mountain part looked smaller, but I was able to install it without any problems.It's just the right length without the excess length that other people hav...閱讀更多 - 符合:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...和更多.
It's just to keep it from rusting and to see if it will move better. The quality is good, so there is no problem.閱讀更多 - 符合:
- HONDA XL400VTRANSALP 92 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- HONDA ST1100ST1100 PAN EUROPEAN 00 [part used] Caliper side
- HONDA X4 97-00 SC38 [part used]Caliper side
- HONDA X4 97 SC38 [Frame No.]SC38-1000001 or later [Use part]Caliper side
- HONDA XL400VTRANSALP 91 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- ...和更多.
It's a little bit expensive, but I think it's not a bad idea to change it because it's a part where corrosion is a concern. It is my personal impression that the dress-up effect is not so hopeful to b...閱讀更多
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING