- 符合:
- KAWASAKI Ninja 1000SX 20-22
(2021/9/12) When I stop at a traffic light, or when the car in front of me moves in a peculiar way, etc., I hit my shin against the slider when I try to put my foot on the ground in a hurry, although ...閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
outlineHook bolt for Maintenance Stand.Reason for purchaseI decided to buy a J-trip Rear Maintenance Stand, so I decided to buy a Hook bolt that is compatible with the Rear Maintenance Stand also made...閱讀更多 - 符合:
- KAWASAKI Ninja1000SX 20-21
Around Wednesday, I received an email saying the item was in stock, so I set up my work area for the weekend and waited for the shipping notice, but it never came. I've been trying to contact you for ...閱讀更多 - 符合:
- KAWASAKI Ninja 1000SX 20-21
The only other option available for the latest Ninja 1000SX is a TRICK STAR one.The BrandImage was negative in my opinion, so I was wondering what to do about it, but I liked the new Slider shape (TYP...閱讀更多 - 符合:
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- SUZUKI Except for the GSX250FX
- KAWASAKI ZX6R 13-21
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- ...和更多.
I bought it as a necessary part to use the STAND to hook the STAND. Rather than the paint peeling off in a true aluminum colored product, etc. Good, I decided on this one.I don't know if DURACON is a ...閱讀更多 - 符合:
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- SUZUKI Except for the GSX250FX
- KAWASAKI ZX6R 13-21
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- ...和更多.
HookSTAND cannot be used without itAn L shaped rear stand is fine, but in the case of my car, I have to use the Exhaust System and Swing Arm sensation is narrow, and if you don't get it right, it will...閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
It was very beautiful, more textured than expected. I am satisfied as being one point Attachment. Since Blue was in Cowl's Color, I tried matching colors.閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
We made it J-trip product in line with STANDI am happy that it is easy to catch V letterMounting from Bolt's headSince Hook bolt Body has a height, it seems that the possibility that Bolt's he...閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
I think that it is a commodity of necessities in Maintenance. Select low things as consumable items. Although deterioration and dirt of Aluminum are a little worrisome, I think that it will be useful ...閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
It is stable at the company's STAND, it is easy to use it for V-letter reception and to hook.Color (Red) It is also good as ColorAccent by Match with our Black Swingarm.Although it is fate of Anod...閱讀更多 - 符合:
- SUZUKI GSX1300R GSX1300R HAYABUSA 21-
- SUZUKI GSX250R
- SUZUKI DL1000 V-STROM250 17-
- KAWASAKI KB4 22-
- BMW S1000RR 15-16
- ...和更多.
Since K-FACTORY products are excellent in detail making, purchase. It also fully functions as Stand Hook.Damage is somewhat somewhat unusual in terms of location and usage.閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
I purchased it because it is necessary for using Maintenace Stand. Although looking coloring is good, it can be used as a function without problems, but despite purchasing a product to which Ninja 250...閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
DL650A L0 was equipped.Since the Center stand was equipped, he was not indebted to a STAND and a Hook, but it was worrisome that the tapped hole was left and it purchased only for appearance.It is sat...閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
It purchased in order to hang on a Racing stands.
Since it is long-established store Brando, I think that it is infallible.
Since the color was also decided according to the car body, it is satisfac...閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
Although the MODEL seemed to be M10 Size in existing and the previous year, the MODEL was M8 Size this time [ ].
閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
Since it changed to vehicles without a Sweater STAND, it purchases simultaneously with a Maintenance stands.
Since it is attached with one Bolt, it is easy, and it also becomes a little Accent of the...閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
Popularity was V Won, simultaneously it purchased.When using it, the kana which should just use M8 usual Screw was thought, but in red, the kana which also becomes an Accent was thought and it purchas...閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
It is used in CBR1000RR 2005.
Although it is >, it is a grade usually To use, since the receptacle is used for the first time of J-TRIP, when going to run a Circuit.
Naturally I think that the aff...閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
It attached the other day and tried today.
The Swing arm was safe although it fell at Gymkhana practice meeting.
(Engine-guard combined use is carried out) It is easy to hang a Maintenance stands a...閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
Cling to CBR250RR. It purchased in order to use maintenance stands. It will be absolutely required if it maintains by itself. It becomes easy Ching to the extent that cleaning and lubrication of a cha...閱讀更多
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING