- 熱門產品
- 會員評論
-
YOSHIMURA 數位 儀錶感知器 B type M16×1.5
It is a little expensive, but since we use a temp meter made by YOSHIMURA, which is a Status, a little is unavoidable.
閱讀更多
I am using it on my CB1100, but instead of using an oil drain bolt, I am ... -
YOSHIMURA PRO-GRESS專用感知器 TYPE-B
I used it on my GS1200SS.
閱讀更多 -
YOSHIMURA PRO-GRESS專用感知器 TYPE-B
I bought this at the same time as YOSHIMURAMulti-temp meter.
閱讀更多
GS1200SS is attached to the Left SideOil pump feed side.
It can be mounted on the Right, but I don't think it will give an accur... -
YOSHIMURA PRO-GRESS專用感知器 TYPE-B
[How is it used?
閱讀更多
This time I installed it on XJR1300C. The installation position is the same as the normal XJR, straddling the Right SideOil pan side.
Was the one you received as per Im... -
YOSHIMURA PRO-GRESS專用感知器 TYPE-B
To use the PRO-GRESS1 Temp/Volt Meter, you need a Sensor. This is a special sensor. The GSX-SSeries should be installed in the place shown in the picture.
閱讀更多 -
YOSHIMURA PRO-GRESS專用感知器 TYPE-B
I bought it to put on my YOSHIMURA Multi-Temp Meter
閱讀更多
In the case of GSX250S KATANA, replace the OEM water temperature sensor It is
Drain the coolant water, turn off the radiator hose, an... -
YOSHIMURA PRO-GRESS專用感知器 TYPE-B
It is very easy to install as it is compatible with the MT-09
閱讀更多
The surface is anodized and nicely colored red, but
When I installed it, MONKEY rubbed against the corner of the product, s... -
YOSHIMURA PRO-GRESS專用感知器 TYPE-B
According to the compatibility information, Sensor Type-B M16×1.5 for PRO-GRESS is There was only compatibility information for 2014 and 2015 MODEL, but I was told by Yoshimura that When I contac...
閱讀更多 -
YOSHIMURA ST-1 改裝凸輪軸
I had these Yoshimura cams installed in my GSX 1400 '06 4 years back and it's now time to control and readjust shims. Installation needs a little adjustment on the cam holders due to the extra li...
閱讀更多 -
YOSHIMURA ST-1 改裝凸輪軸
The last impression was a controversial evaluation
閱讀更多
This time, I tried increasing the fuel with the power commander
Surprisingly the acceleration in the second half was sharp and I felt ...
- 熱門產品
- 會員評論
-
A-TECH 牌照架
The body hits by hitting the Fender Eliminator and the degree of exposure of the Number has gone up, so the Number crooked.
閱讀更多
After that after running, bending Habit stuck around and I was troub... -
A-TECH 牌照架
It purchases to the License frame of a GSX1300R HAYABUSA. The Carbon matched the car body and back to appearance became very much good. If there is twill, I will think that it is still better. ...
閱讀更多 -
A-TECH 散熱器(水箱)核心保護蓋
It attaches to GSX1400.
閱讀更多
If a raw material is seen by the eye, it will think that the cut portion ? of a hole is somewhat coarse, but I think that it is quite good for a dress-up up at that wh... -
A-TECH 後土除
It changes to a sporty considerably! Since it was fairly last-minute, it was uneasy, but it was good to attach simply.
閱讀更多
Maintenance and I weak were also able to carry out easy attachment very ... -
A-TECH 單座整流罩
although he thought that he would make it immersed in carbon and being purchased -- structure of other A-TECH products -- it was different in why and processing etc. were quite required.
閱讀更多
Alth... -
A-TECH Half Cowl Lunasole
Although the bikini cowl was attached from the first, image-change & windscreen operative UP was considered, and although it was dramatically expensive, it purchased drastically.
閱讀更多
It is also p...
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING