YAMAHATW200改裝零件和會員評論

ALCAN hands 黑色橡膠握把套 Epsilon

Used for XELVIS.Universalism is high because of the general inner diameter.The design is not often seen, but it is thick and soft and comfortable to grip.It's also non-slip, so you won't get tired even if you hold it for a long time.If you like the design, you should buy it.

商品詳情

HURRICANE European 1型 Φ7/8英吋金屬把手

The OEM Handlebar on the ELIMINATOR 250 was bent, so I looked for something similar to the OEM.This is almost the same as OEM etc. Of course, there is no hole in the Switch box, so some kind of modification is necessary.I don't have any drawbacks, but I'm not sure if it floats a little bit faster th...

商品詳情

HURRICANE Flat Type 2 Φ 7/8 吋鋼製把手

I found a Handlebar that is as close to a single character as possible. I haven't found a Handlebar that is straight and single horizontal character.This Flat Handlebar has a little bit of an angle to it, but it looks almost straight after it's assembled to the body. It is very cool that it is compl...

商品詳情

NGK 日本原裝 - 銥合金火星塞 DR8EIX 4816

Since the AS Votani was reinforced with Coil, I thought it would generate stronger sparks, so I replaced it. Actually, before and after the replacement, the engine performance was improved a little bit. As for the running performance, I did not notice any change.I highly recommend Carburetor Vehicle...

商品詳情

HURRICANE Flat Type 1 Φ 7/8 吋鋼製把手

The GB250 I got was converted to the ugly Handlebar Up Type, so I bought it to revert to the OEM style.This is a flat drag bar and almost the same shape as the OEM handlebar.I found out after looking for it, but it's hard to find such a simple Single Letter Handlebar with a lineup.I recommend this f...

商品詳情

MADMAX 握把套 (Wave Type)

The product description says Non-Penetrating, but the Left is Non-Penetrating, but the Axel side of the Right is Penetrating. What is this?It's cheap and the Design isn't too bad. I'm not going to use it as it is, so I'm going to use it with the Penetrating process.

商品詳情

NGK 日本原裝 - 銥合金火星塞 DR8EIX 4816

The final XG250 TRICKER (about 1500 km) mounted onWhile using the Plug of Standard Equipment, there was a possibility of stalling when Axel was slightly opened at the time of starting or just before stopping, but there was no stalling after installing this Plug.I'm very happy with this effect for an...

商品詳情

KIJIMA 鋁合金擋泥板

【good point】None[Bad point]I tried to install it on the TW, but I couldn't do it due to a bad shape.Moreover, it is only made by bending a plate of aluminum.It's not end-faced, so if it's handled incorrectly, it will usually cut your hand.Wouldn't you break your pants if you ran with them on?[Summar...

商品詳情

KEYSTER 化油器調整套件

【good point】Required Quantity:It is very attractive that you can get a set product inexpensively.It's a good idea to use this one, especially if you don't want to change the spec. of carburetor into a large one.[Bad point]None in particular[Summary]Easy to use product for vehicle Restore and carbure...

商品詳情

KITACO 排氣管墊片2個入

【good point】It can be installed according to the type of car.The quality is not bad. No problem if the Gasket is in the shape of a circle, as it will be crushed anyway.[Bad point]nothing special[Summary]I know it's hard to impresse in Gasket.For now, it's not a problem to use. It works properly.


排氣系統(排氣喉) (66) 4.0	外觀零件 (209) 4.3	引擎 (103) 4.3
排氣管尾段(排氣喉) (7) 全段排氣管(排氣喉) (47) 其他排氣系統零件(排氣喉) (3) 排氣管墊片(排氣喉墊片) (8)	其他外觀零件相關零件 (26) 後貨架 (9) 整流罩相關零件 (6) 土除相關零件 (36) 號碼牌相關零件 (21) 後扶手・後靠背 (12) 油箱相關零件 (40) 坐墊相關零件 (59)	燃料系統 (1) 進氣系統(風隔) (44) 引擎零件 (33) 點火系統 (12) 冷卻系統 (13)
所有商品	Show more 所有商品	Show more 所有商品


轉向系統 (414) 4.2	傳動系統 (64) 4.5	煞車系統 (101) 4.3
握把套(握把) (83) 把手(手把) (132) 其他轉向系統相關零件 (14) 把手周邊零件(手把) (116) 把手套件(手把) (46) 後視鏡 (21) 分離式把手(手把) (2)	離合器 (12) 鍊條相關零件(車鏈) (27) 齒盤 (23) 速可達傳動系統 (2)	煞車線(拉索) (17) 煞車皮(來令片)(迫力皮) (49) 煞車碟盤(煞車碟) (1) 煞車油管(迫力喉) (21) 煞車主缸 (13)
Show more 所有商品	所有商品	Show more 所有商品


電系零配件 (139) 4.0	車台骨架(車架) (4) 2.8	底盤 (53) 4.1
其他電系零件 (24) 儀表 (18) 開關・配線相關零件 (5) 燈光類 (91)	側邊駐(側架) (2) 保桿・防倒球・引擎護塊 (2)	腳踏(升高腳踏) (18) 懸吊・避震器(避震) (17) 後搖臂 (5) 車輪 (13)
所有商品	所有商品	所有商品

移位	196	發動機類型	4-stroke/Air-cooled/SOHC/2 Valve
最大輸出（ps）	16ps(12kw)/8000rpm	最大扭矩（kgf / m）	1.52kg・m(15N・m)/7000rpm
車重（乾重）	120	油箱容量升	7

YAMAHA TW200

ALCAN hands 黑色橡膠握把套 Epsilon

HURRICANE European 1型 Φ7/8英吋金屬把手

HURRICANE Flat Type 2 Φ 7/8 吋鋼製把手

NGK 日本原裝 - 銥合金火星塞 DR8EIX 4816

HURRICANE Flat Type 1 Φ 7/8 吋鋼製把手

MADMAX 握把套 (Wave Type)

NGK 日本原裝 - 銥合金火星塞 DR8EIX 4816

KIJIMA 鋁合金擋泥板

KEYSTER 化油器調整套件

KITACO 排氣管墊片2個入

最近瀏覽的商品


輪胎 (10) 3.9
其他輪胎相關用品 (3) 越野胎 (7)
所有商品


騎士用品 (46) 4.0
保管・防盜用品 (32) 旅行用品 (2) 汽車旅行用品 (2) 電子機器類 (3) 其他 (6) 車身用包包・行李箱(尾箱) (1)
Show more 所有商品