- 符合:
- Others CR-SPECIALCarburetor KEIHIN
The wire diameter was too thin and there were concerns about its durability, so we gave up using it.閱讀更多 - 符合:
- KAWASAKI Z750FX2
- KAWASAKI Z750FX3
- KAWASAKI Z650
- KAWASAKI Z750FX1
- KAWASAKI Z2
- ...和更多.
The body is too big to be placed anywhere. It's not good if it touches anywhere due to vibration while driving, and it's awkward to wrap the hose around the body to hold it somewhere. If you're going ...閱讀更多 - 符合:
- Others CR-SPECIALCarburetor KEIHIN
I don't know how durable it is, but the Wire adjustment made it lighter.閱讀更多 - 符合:
- KAWASAKI Z1 (900SUPER4)
- KAWASAKI Z1000LTD
- KAWASAKI Z1-R
- KAWASAKI Z1000MkII
- KAWASAKI Z2 (Z750 FOUR)
- ...和更多.
I bought it because Throttle response was slow and I wanted to replace it with a new Wire.It is sold by various manufacturers, but this time "Mame Shiba." You have selected theIt's just a little bit m...閱讀更多 - 符合:
- SUZUKI GSX-R600
- SUZUKI GSX-R750
- Others Universal
- SUZUKI GSX-R1000
I bought VariableThrottle pipe because the slip of Throttle Cable itself of TMX30 was bad.After installing it, it became a little lighter.The Grip and Pipe are one piece and the Grip itself was good.T...閱讀更多 - 符合:
- KAWASAKI Each Z-series Machine
[How is it used?Normal cabOverseas CamshaftFull Exhaust SystemPower Filter type air cleanerUsed inAlthough it is not Spec. that can bring out the goodness of this product, if you want to refresh the i...閱讀更多 - 符合:
- SUZUKI GSX-R600
- SUZUKI GSX-R750
- Others Universal
- SUZUKI GSX-R1000
[How is it used?Was the one you received as per Image? Yes.Was the installation difficult? Installation at Motorcycle shop.How was your experience with it? Axel operation is now lighter and easier.[In...閱讀更多 - 符合:
- Others CR-SPECIALCarburetor KEIHIN
I use the CR carburetor in my CB750 for some time and it works nice, although the work of the original throttle cables was not so light. I ordered the PEEK link rod after reading a lot of good comment...閱讀更多 - 符合:
- SUZUKI GSX-R600
- SUZUKI GSX-R750
- Others Universal
- SUZUKI GSX-R1000
Last year I have mounted a CR31 for my CB750 RC42, together with some extra parts from Factory Mameshiba, but the throttle feeling with original Honda grip and throttle cables was not satisfying at al...閱讀更多 - 符合:
- KAWASAKI Z1 (900SUPER4)
- KAWASAKI Z1000MkII
- KAWASAKI Z1-R
- KAWASAKI Z1000J
- KAWASAKI Z1000LTD
- ...和更多.
There is no difference with other manufacturers. If there is a difference after replacement, it means that the original wire had deteriorated considerably.閱讀更多 - 符合:
- SUZUKI GSX-R600
- SUZUKI GSX-R750
- Others Universal
- SUZUKI GSX-R1000
Introduced in April of this year, the Carburetor is a single wire pull of OEMBS32.I have only used the car for a little less than 600km, but I have experienced improved control in the low and medium o...閱讀更多 - 符合:
- KAWASAKI Z1 (900SUPER4)
- KAWASAKI Z1000MkII
- KAWASAKI Z1-R
- KAWASAKI Z1000J
- KAWASAKI Z1000LTD
- ...和更多.
This is a product that Mame Shiba has been raving about on the Mame Shiba blog and introduced as nothing more than this.If the Clutch operation is that light, I bought it to give it a try.The subject ...閱讀更多 - The GSX-R1000R required a custom 4 channel I use it with the V-UP16The engine feeling that was made rough by the installation of the V-UP16 is now smooth It's changedThe Engine's response to the Axel ...閱讀更多
- The GSX-R1000R required twoYou can see the effect of the Ha-Drill The low rpm range has obviously become stronger It becomes a gurgling rotary fee ring閱讀更多
- 符合:
- SUZUKI GSX1100S
- SUZUKI GSX750S
- SUZUKI GS1000
- SUZUKI GSX750E
- SUZUKI GS750
Purchased as a replacement for NORMAL parts, Plating Plating Process that I was doing Image I thought the surface treatment was a bit disappointing, not the It's a component that has more of a dress-u...閱讀更多 - The SP-II and BriskPlug were installed together with the SP-II and the BriskPlug in April, and we were able to get 460 these are my impressions after driving for 2.5 milesUnlike Brisk ZCPlug's triple ...閱讀更多
- I'm sorry to say it wasn't through Mr. Webike, but he installed it at the same time as the SP-II installation It wasI threw in more SP-II to make sure it was effectiveThe Cell was fine to begin with, ...閱讀更多
- 符合:
- SUZUKI GS1000
- SUZUKI GSX1100 E
- SUZUKI GS750
- SUZUKI GSX750 S
- SUZUKI GSX750 E
- ...和更多.
It is not through Mr. Webike, but I did the installation setting in the shop in the middle of April We have been asked to do thisMy vehicle is a Reducer, NGCExtra GroundingHelper and NGC static elimin...閱讀更多 - I have been using NGC's Bolt and Air cleaner for the intake system and undercarriage I've done TwoWayCoat etc. and felt the effects, but this time, I've been able to do the HaDrill and There was no ch...閱讀更多
- HeadGround Set, Terminal bolt, purchased in January of this year Anti-static protection of the InsulatorBandBolt and Carburetor coverBolt I purchased 4 parts from NGC, and this is the second stage of ...閱讀更多
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING