- 符合:
- KAWASAKI BALIUSII
- KAWASAKI ZSeries *Excluding Z800
- KAWASAKI Z250 13-17
- KAWASAKI ZZ-R1400
- KAWASAKI ZX-9R 98- (Type C- and Type 2-)
- ...和更多.
It is the only cheap J-TRIP where everything is sold separately.This makes it very easy to raise Motorcycle.閱讀更多 - 符合:
- KAWASAKI
The paint is durable and does not peel easily.Functionally, there is no problem, but when the paint peels off...I don't think it is beautiful when viewed as a custom.The z900rs is a little difficult t...閱讀更多 - 符合:
- YAMAHA General-purpose* All Yamaha vehicles since 1998
- TRIUMPH DAYTONA675 -09 *Measurement of hole diameter with caliper required
- DUCATI MONSTER S2821
- DUCATI Panigale 899.
- APRILIA SL750
- ...和更多.
The aprilia RS250 First Model Type LD0, which I got second hand, can be attached to the screw hole that was originally on the Rear Swing Arm without any problem.I don't know how it works as a slider s...閱讀更多 - I decided to do my own maintenance for the first time in over a decade, and pulled out the maintenance stand, but the rubber on the roller had deteriorated to the point where it was falling apart …….I...閱讀更多
- 符合:
- YAMAHA YZF750SP
- YAMAHA YZF1000
- YAMAHA YZF-R7
- YAMAHA YZF 750R
- YAMAHA TZR250 (2MA/3XV)
- ...和更多.
Designability is almost non-existent, but I don't mind because it's a functional Parts.The head is large, so it's easy to hook and easy to use.If I wanted to, I'd be happy if it was a little cheaper.閱讀更多 - 符合:
- KAWASAKI Z900RS
- KAWASAKI
There are a lot of parts out there.This is a recommendation for those who can't be bothered with curing anodized materials, because they can be wounded quickly, and even if they are scratched, the col...閱讀更多 - 符合:
- YAMAHA General-purpose* All Yamaha vehicles since 1998
- DUCATI MONSTER S2821
- TRIUMPH DAYTONA675 -09 *Measurement of hole diameter with caliper required
- DUCATI Panigale 899.
- APRILIA RSV1000 Series
- ...和更多.
Works great with JTrip Stand閱讀更多 - 符合:
- SUZUKI Except for the GSX250FX
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- it is strongly recommended to use the L-interface.
- ...和更多.
outlineHook bolt for Maintenance Stand.Reason for purchaseI decided to buy a J-trip Rear Maintenance Stand, so I decided to buy a Hook bolt that is compatible with the Rear Maintenance Stand also made...閱讀更多 - I bought this because I was running out of Weight left when I replaced my Tire.I found it a bit surprising that JTrip, famous for STAND, was selling Wheel's Balance weight.However, since I usually use...閱讀更多
- Material sold at Home center:RubberRoller is also good, but this OEMRoller is still superior when it comes to durability.閱讀更多
- I switched to NINJA1000sx, and when I tried to use STAND, I bought the color that fits without any research.If you are looking for the best in the market, you will find that there is a lot to choose f...閱讀更多
- I bought it because the Pin supplied with the DAYTONA Front Stem Up Stand was limited to 24mm and the Ninja 1000 needs 27mm.Of course, this product is made by J-TRIP and not by DAYTONA, so it is not a...閱讀更多
- 符合:
- KAWASAKI Z900RS
- KAWASAKI
This is Swing arm hookBolt for Z900RS only!You can lift up without interfering with the exhaust system or swing arm when using the V receiver!閱讀更多 - I used this product to adjust the balance of Aluminum Wheel. You can cut it to your favorite weight and the adhesion is so strong that you don't have to worry about it peeling off.閱讀更多
- 符合:
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- SUZUKI Except for the GSX250FX
- KAWASAKI ZX6R 13-21
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- ...和更多.
I bought it as a necessary part to use the STAND to hook the STAND. Rather than the paint peeling off in a true aluminum colored product, etc. Good, I decided on this one.I don't know if DURACON is a ...閱讀更多 - 符合:
- TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter
- KAWASAKI NINJA400 18-21 EX400G-A23119
- SUZUKI Except for the GSX250FX
- KAWASAKI ZX6R 13-21
- KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock
- ...和更多.
HookSTAND cannot be used without itAn L shaped rear stand is fine, but in the case of my car, I have to use the Exhaust System and Swing Arm sensation is narrow, and if you don't get it right, it will...閱讀更多 - 符合:
- KAWASAKI BALIUSII
- KAWASAKI ZSeries *Excluding Z800
- KAWASAKI Z250 13-17
- KAWASAKI ZZ-R1400
- KAWASAKI ZX-9R 98- (Type C- and Type 2-)
- ...和更多.
I ordered it to fit the NINJA 650, but the 2018 model has a screw diameter of Large I could not install it properly I am very disappointed as the product is not bad閱讀更多 - I've been riding a VTR250, and when I have to do chain maintenance on it I used it with the Rear Maintenance Stand with the L-shaped supportThis time I changed to MT-25 and used the L-shaped catcher, ...閱讀更多
- The RearMaintenance Stand I was using on my VTR250 was an L-shaped receiverWhen I put it on the MT-25 as it was, it took on the exhaust system I didI bought this product in a hurryI was confused with ...閱讀更多
- 符合:
- KAWASAKI BALIUSII
- KAWASAKI ZSeries *Excluding Z800
- KAWASAKI Z250 13-17
- KAWASAKI ZZ-R1400
- KAWASAKI ZX-9R 98- (Type C- and Type 2-)
- ...和更多.
I have a Maintenance Stand, so I didn't have a hook, so I bought it It is the same manufacturer as the Maintenance Stand, so it was possible to use it without a problem閱讀更多
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING