- This is great!!! I highly recommend it!!!Clutch operation input is dramatically lightened.I operate with four fingers of the left hand, but two fingers are also sufficient.I think it is more than wort...閱讀更多
- Great quality and fits well. Replaced a cheap mirror holder to an official Accossato one for my Accossato clutch lever. 閱讀更多
- I replaced the OEM lever because it was too far and too long and didn't feel right.Installation is easy, just remove the NutBolt and replace the Lever.The distance of Lever can be adjusted by Dial, an...閱讀更多
- I don't know about the other models, but the MT-10 required modificationIf it is installed as it is, the Clutch lever does not open fully, so it makes contact with the holder The lever ratio seems to ...閱讀更多
- Used in YZF-R1Clutch's Stroke stretches, but it's dramatically lighterIt's a lot easier to be half-crazed!Gold is recommended for a luxurious lookI recommend buying the Beringer Switch with it, which ...閱讀更多
- The OEM's Lever was far and hard, but it certainly got 25% or more easier to replace the Clutch operation.As a struggle when exchanging, electric Wiring (I am not good at it) And Clutch Wire '...閱讀更多
- I attached the Clutch lever without attaching this part, but attached to handling Instruction Manual "Recommendation" There was and so I purchased it again.Although it will not be a thing th...閱讀更多
- I installed it because I installed the company's Clutch lever, but I do not know if it was honest.My CBR 600 RR 07 MODEL Because North America uses Engine without having to grab Clutch - - -Well s...閱讀更多
- - Clutch adjustment and Clutch switch (BeringerClutch switch) I was not confident of the adjustmentSo I brought it to the store where I purchased Motorcycle.- Clutch lightened dramatically after insta...閱讀更多
- With High seat exchange, I felt somewhat uncomfortable feeling, so in various Manufacturers, there are settings of 20 ~ and above, but Handlebar does not change Spacer possible feeling is about 15 mm....閱讀更多
- Since it seems there is no play of Cable length at other company's 20 mm UP, purchase 10 mm UP acosat.Although it is a Universal Product, when installed, the color (Black) , Both width and width a...閱讀更多
- It was nice to change the heavy Clutch lever so far. I think that we can also issue Manufacturer from the beginning. Because I do not seem to be able to replace it all by myself, I changed it with Red...閱讀更多
- Because the Clutch of Z1000 is heavy, I was looking for a lighter Lever. I read some blog and that I learned about Akosat. I purchased a variety of examinations.Clutch has become lighter in several st...閱讀更多
- This is the Achosat's Clutch Unit.Assay for Clutch + Decompression lever is sold from Boa Ace for SR 400. Since we introduced this time we will post Review of Clutch.As a feature, the Lever ratio ...閱讀更多
- The type of Screw stopping Lever is Torque. It is pretty hard whether Screw lock is used. I think it will be a pain to remove it if it is a Torque of Driver type.Remove Lever, please be careful not to...閱讀更多
- I installed it in the 2014 model.Installation itself is quite easy. Even if Grip goes away, it will be in a flash. I think that it is lucky if you injure the angle to Handlebar before loosing Clamp le...閱讀更多
- I ordered with ACOUSATO's Clutch and Set, but my Motorcycle was unnecessary parts as it was a motorcycle with no Clutch switch.Please check your Motorcycle carefully before ordering.閱讀更多
- Wait two months after placing an order and finally arrived the product, so if you thought about installing and going on now, if Lever has two scratches on it and Tension goes down.Even if it is exchan...閱讀更多
- I purchased this part along with the clutch lever which I had damaged when I fell. The lever movement has become considerably light, for the lever ratio has changed.On the other hand, the play has to ...閱讀更多
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING