DAYTONA

Before attaching it, it was a shrill sound, but after the installation it became a bass and it became a good sound. It is a length that can be used twice with one piece.

The exhaust install went perfect since it fits over the stock pipe; it was nice that the Daytona exhaust came with a gasket and mounting bracket and bolts. This exhaust has a deeper tone and is louder...

DAYTONAMINI I bought Repair Lens from Orange Lens of Unka to White but there is a protrusion where I insert it into the body of Lens and it can not be installed as it is.There is no choice but to scra...

daytona传动套件：传动皮带，普利盘/珠/止滑块 密封传统部件
PCX125 2012款原装传动使用20800公里出现马力迟滞感，检查发现原装传动出现较大的磨损情况
个人选daytona该款传动，看重的是耐用度...

Maru is so modest so you can exchange immediately!Installation is also finished if you tighten to the carburetor with Band! But if you do not tighten it firmly it will come off while driving, please m...

Good quality. We are going to use for Honda outboard motor tuning.
Hope to get good results!
Balay Tuko Yacht club in Puerto Princesa Palawan.

It is screwdriver magnetiser / demagnetiser. So the screwdriver can have magnet function ever the screwdriver have not the magnet function. It is good function when you need to screw something on. mak...

I can use it quite often.. It is unexpected to put it in the vicinity and use it also except for the maintenance of Motorcycle. Since there are various tools in one, it is also good that it does not b...

Stator Coil When a failure was encountered, when the display voltage declined to within the seeing and falling, the red color display became quick and we were able to cope quickly.If you slightly redu...

BW'S (SA44J) It attached to.If you are looking for documents to be inserted,I found this item.Seat The Screw stopper is required behind,It is lange and strange that there is.Because prices are al...

Before purchase, it was difficult to push DButton at Imprez, but if you get used to it there is not dissatisfaction there.More than anything, since it looks more refreshing than those of other Manufac...

KabooOne size Large person is recommended.By all means, there is nothing to compareIt is purchase of Cover.Experience, I think that One Luck Up can cover everything.

A reasonable quality texture. I can not say it because I do not know how long it will last for durability. Used for CBR 1100 XX with SizeLL. Satisfied with perfect size. Consumables and dividends You ...

I tried variously from a number of Cover.Cheap things from Cover of 100 yen shop until Cover to 2-3 million yen.It is durability that we place importance on Cover, that rain does not invade, that the ...

Once in a while, it was soloTwoMain so buying it cheaply before the discontinuance and leaving it at home is not badI'm trying out if I can talk with B + COM that I am using now!Connect conversati...

It was familiar and easy to drive Gloves. 4Season 3 hands on both sides Tear on the palm side became unusable. Is not it a lifetime?. Thank you for your good work.

I could not maintain the state I grabbed with too much fit.Do you feel L in XL?I was sorry that both texture and design were very good, I made Present.

I purchased L Size, but Right is just right, Left gets hit by Protector on the top, it hurts and I can not use it. Right is just right, I think that it is good to create and sizing in the same way, is...

When the goods arrived, as soon as we tried, the thumb was slightly Oversized.But, if you actually hold Handlebar, there is a feeling of Grip!Easy operation of Blinker. Brown is also nice Brown.Howeve...

I am satisfied with Cost performance and quality.Large rain does not matter at all..However, I think that it is better that the wall thickness is a little thinner.

Because it seems that Helmet is hurting in the vicinity of Tandem Footpeg, I chose Type attached to Handlebar Post. You can use vSTROM without trouble because the top of Tank is wide with Flat.

Combination Nifrek and Helmet lock can be used without problems, but I think that it can be satisfied if the quality is better a little more.Since Helmet lock rotates 360 degrees, it is a pity that we...

Until now I used a Wire type lock, but since it was taking out from Bag when I used it, it was good that I did not have troublesome work with this product

Attach to LeftMirror Holder.Doing so makes it possible to use Handlebar Lock when you just put Helmet in Tank.Although it is a simple lock, it is convenient for touring because the lock will be lost e...

Mounting on SHOEI X-13It will be attached to the X-13 on the Mesh cloth and can not be adhered to the Helmet by any means.Although it is possible to attach it in half-attached state, it is for Helmet,...