GALE SPEED 【TYPE-E】鋁合金鍛造後輪框 (玻璃塗層)
I installed TYPE-E in Z900RS Cafe.Rear is widened to 5.5J & rarr;6.0J from OEMTherefore, Tire has also been changed to 180→190.The wheel has been glass coated so the surface is smooth and shiny.Gun me...
 |  |  |
| | | |
 |  |  |
| | | |
 |  | |
| | |
GALE SPEED 【TYPE-E】鋁合金鍛造前輪框 (玻璃塗層)
I installed TYPE-E in Z900RS Cafe.It's already glass coated, so the surface is smooth and shiny.Gun meta wheels matched to the body color are not flashy, but I felt it was unified and cohesive.I compa...
GALE SPEED 拉索離合器支架套件
I've often heard people say that the Clutch lever was installed to improve the weight of the Clutch lever, but although the weight wasn't a big concern, I was concerned about the OEMLever's wobble up ...
GALE SPEED 氣嘴74°/含鋁合金氣嘴蓋 φ11.5對應
The OEM Valve is a straight I-shaped Valve, so the Air gauge interferes with the Wheel when adjusting the air pressure, which is quite stressful.I replaced it with an L-shaped Valve to get rid of that...
GALE SPEED 【VRC系列】煞車主缸
2003 (PC37 first semester) Installed on a reimported car.The OEM is Semi-radial, so you can't just pimp it out.When the Handlebar is cut to Left, the Body hits the Meter, and so on.Adjust the angle of...
GALE SPEED 拉索離合器固定座套件
I was looking for parts to reduce the force of the Clutch operation while still using the wire type Clutch and found this product. There were no other parts of this kind available and this was my only...
GALE SPEED 氣嘴74°/含鋁合金氣嘴蓋 φ11.5對應
I bought this for the spout of the Brake fluid I bought with itJust drill a hole in the lid of the brake fluid and put a valve cap on it!Surprisingly, you often overfill the Fluid when you pour it in,...
GALE SPEED 氣嘴74°/含鋁合金氣嘴蓋 φ11.5對應
I have installed them on every motorcycle I ride It makes it easier to get air in and, like the RubberValve, it's degraded and leaking air, almost like the RubberValve It is safe to use because there ...
GALE SPEED 浮動煞車碟盤(後)
The OEMs are cheaper, so it's a replacement, and the price is more affordable, so it's easier to get your hands on than FrontWhen you remove the OEM, there is a high-strength screw lock material on it...
GALE SPEED 油壺支架
Brembo RCS brake master cylinder and smoke tank (S50) I used it to install theSmoke tank and 8mm high rubber bushings (POSH H-Shaped Rubber PARTS-NO,100202) The combination of the attached M6x20mm bol...
 | ||
| |
GALE SPEED 鑰匙圈
I bought the green one of this type because it's rare, but I don't want to say anything bad about it But …It's a terrible comparison to the KawasakiOEMAttachment, but the leather itself is thinIs the ...
GALE SPEED 鑰匙圈
I think that it is inexpensive or well made, and that Large is just right.. However, I think that this is a malfunction of only the one I bought, but since Hook was a little loose feeling, I fixed it ...
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING