Fits: BMW R nineT 21- RN12, BMW R nineT 13-16 R1ST, BMW R nineT 17-20 1N12, BMW R nineT Racer 17-20 1N12, BMW R nineT Scrambler 16-20 1N12
This bike was going to have it's first track day and needed by UK track rules that a lever guard must be fitted. There a re a lot of brands out there that provide the same kind of lever guard but this was the specific brand the cutomer wanted. Findingf the right part ws not hard as I just used the tools Webike provide in their help section and then cross referenced with Gilles Tooling website. The price was fairly average but as I was already ordering some items from Webike, I decided to get this lever guard as well. My preferred courier is EMS as they just get my orders to me fast. This prder arrived in 5 days from being shipped. The lever guard came in the standard Gilles box and came with a host of instructions and all fittings needed. The lever guard itself is a very well machined part. The precision is superb, it has a lovely finish which is very tactile. It already comes with a bar end fitment and is a 2 part guard. Thsi is a very sturdy part and would take a lot of force to hinder the actual brake lever which it protects. Very happy with this purchase and it fitted really easily as you would expect from Gilles Tooling. Thanks Webike. View Detail
Fits: YAMAHA YZF-R7 21- RM39, YAMAHA YZF-R6 17-20 RJ27, YAMAHA YZF-R3 19- RH12, YAMAHA XSR 900 16-21 RN43, YAMAHA XSR 900 22-
I wanted to smarten up the bike with a few Gilles Tooling accessories and this was one I wanted. It is the rear brake fluid reservoir cap. Finding the right one was not hard but I did need to go through Gilles website and search that way. The price Webike had at the time of ordering was really good as they did have a sale on. With a couple more accessories I got all my order shipped together, this saves shipping costs on smaller items. I use EMS these days as they just get my orders delivered as soon as possible. The order was delivered in 5 days from shipping so you can't get much better than that. The order was well packaged and although the Gilles cap was in it's own well protected box, Webike took the time to make sure that there could be no damage to anything. A lot of bubble wrap was used which was great. The cap itself is a very very well machined part. The threaded section is super smooth, there is also a set of coloured rings you can use to put in the cap which might match your bike colour scheme. Very nice touch. A word of warning though, once you home the coloured ring you will not get that out without making a mess so choose wisely. Not a problem if you intend to keep the colour ring in place of course. I chose the red one btw. Anyway, there was not a problem fitting the cap as it literally just screws onto where the OEM one goes, that's it. Very pleased with the purchase so thank you Webike, very happy customer.View Detail
Fits: YAMAHA MT-10 SP 22-, YAMAHA FZ6 Fazer 04-06 RJ07, YAMAHA FZ6 04-06 RJ07, YAMAHA FZ6 Fazer ABS 07-10 RJ14, YAMAHA FZ6 Fazer 07-10 RJ14
This was also another one of the aftermarket accessories I had been meaning to get. This was the Gilles Tooling Engine Oil Filler Cap. Like my previous Gilles purchase, this was found to be in the sale so I grabbed the chance and added to the basket. It was not too hard to find the right cap for my oil filler but I did have to use Gilles Tooling website for that information. No bother really. With the other parts in my order, I got them all shipped by using EMS and they always get my orders to me fast. This was no exception, 5 days from being shipped from Webike warehouse and my order was at my door. Everything was very well packaged and kept safe with a lot of bubble wrap which pleases me. The filler cap came in it's own Gilles box and was already well protected. The cap itself is a well machined part and just like the reservoir cap, it has super smooth threads and a set of 3 coloured rings you can choose which colour suits your bike best. As before, choose well as you will not be getting the coloured ring out once you have it place without making a mess of the ring and the cap. With this cap and thre reservoir cap fitted it just ties in the Gilles stuff which is nice. The bike looks very sweet now and I am one very happy customer. Thank you Webike.nView Detail
Fits: SUZUKI GSX-R 1000 05-06 WVB6
I already have a set of Gilled rearsets on this bike and wanted to finish off teh look with a nice shift holder in the same brand. Gilles is a great brand and make some top quality products, much the same as this. I found teh right part by searching Webike site and cross referencing with Gilles website. The price Webike had this for was actually on sale when I got it and was better than locally. With some other parts in my order, I had all shipped using EMS and all arrived at my door in 5 days from shipping. The box this shift holder came in was perfect, the packaging of the entire order was superb. The shift holder is the titanium colour which matches the rear sets perfectly. It came with a full instruction guide and fitted really easily. By far, Gilles Tooling is one of the very best for most motorcycle parts and one I will ercommend all the time. Very pleased with how this looks and helps with the shifting. Great work Webike. View Detail
Fits: YAMAHA FZ-10 16-21 RN45, YAMAHA FZ-09 13-16 RN29, YAMAHA FZ-09 17-20 RN43, YAMAHA FZ-07 17-20 RM17/RM18, YAMAHA FZ1Fazer 06-15 RN16
Having changed out the front rear sets the foot pegs they came with were great for grip and the rear also could do with changing to match and also for passenger grip. Not a hard part to find as these do fit a lot of different Yamaha models. The price was about the same as I could source locally but my supplier was awaiting them so I got them direct from Webike. There were a few other parts in my order so I got them all shipped together. EMS delivered my order in 5 days from shipping. Everything was packed well and no damage during transit. These foot pegs are a thing of beauty, the machining that went into them is fantastic, the foot area is super grippy and will not fail even when wet, (I know from experience). The glossy black paint finish is awesome and probably the best I have seen on foot pegs before. Not a hard job to fit, I used new cotter pins to add the foot pegs as the old ones were not great. The overall finish is better than expected. Thank you very much Webike, great job.View Detail
Fits: BMW R 1200 GS Adventure 06-12 R12, BMW F 650 GS 07-12 E8GS, BMW F 800 GS Adventure 07-17 E8GS, BMW K 1300 S 09-16 K12S, BMW F 800 GS 07-17 E8GS
우선 예상일정보다 빨리 배송되었고, 배송비도 저렴해서 강력추천합니다. 포장도 튼튼해서 파손없이 잘도착했네요.홈페이지에 명기된 차종에 맞게 조립에 문제 없었습니다좋은물건 좋은가격에 구매하게 되어서 기뻐요재구매 또는 지인에게 추천하고있습니다View Detail
Fits: YAMAHA MT-10 16-21 RN45, SUZUKI SV 650 X 18-20 WXC0/WCX1, YAMAHA MT-03 16-20 RH07, YAMAHA MT-10 SP 17-21 RN45, YAMAHA FZ-10 16-21 RN45
The cap itself is great, but it doesn't fit my US-spec motorcycle, unfortunately. I'll hang onto it and hope to find a new cap to put this on one day!View Detail
Fits: YAMAHA YZF-R6 17-20 RJ27, YAMAHA YZF-R1M 17-19 RN49, YAMAHA YZF-R1M 20- RN65, YAMAHA YZF-R1 20- RN65, YAMAHA YZF-R1M 15-16 RN32
Having already decided to purchase the front Gilles Tooling axle sliders, it was only right that I also purchase the rear axle sliders. I found the correct part from Gilles Tooling website. Then again, luckily, Webike also stock the rear axle sliders too. Brilliant. I could probably get these shipped direct from Gilles at around the same kind of price but then I woul have to hope they package their products accordingly. Ended up just getting averyhting from Webike.There were already the front axle sliders in my basket and a few other smaller bits and pieces. The shipping because of this was a lot better value than if I purchased just one or two products from Webike. I use nowadays, EMS fast. The service is spot on, everything is delivered in rapid time, when I say rapid, I mean from Japan to the UK in less than 5 days. All the parts in my order were neatly fitted into a smallish box which Webike took the liberty to seal on the outside. The inside was well packaged and these guys must be great at Tetris as they got eveything in the samll box without compromising the efficiency of the extra packing. They filled any gaps with bubble wrap and air pockets. When these arrived, you can just feel the quality. All the machining is perfect, no weird burrs or shards. The paint is flawless and you also get a couple of different coloured rings which should suit anyone's needs. Fitted really nicely and the overall result is a great looking bike with protection I know I can trust just in case. Very pleased with my purchases, thank you WebikeView Detail
Fits: YAMAHA YZF-R6 17-20 RJ27, YAMAHA YZF-R1M 20- RN65, YAMAHA YZF-R1M 17-19 RN49, YAMAHA YZF-R1M 15-16 RN32, YAMAHA YZF-R1 20- RN65
DOing a little bit of protection for the R1 recently and decided to go for the Gilles tooling axle sliders. I have used Gilles for protection before and have had really good results even after them getting some action. I found the correct part from Gilles tooling webisite and then searched Webike for the corresponding parts. Luckily, Webike do have quite a lot of R1 Gilles items in stock. Get in the basket. These were part of a larger order as this also saves me money on the amount of shipping. I use now EMS fast as they have never let me down. Even from Japan to the UK takes 4-5 days total. This time around, most of the parts were already in Wrbike warehouse so they all arrived in 5 days. I do love the way Webike package their orders. They take great care in packaging well and keeping everything separate and individually packed. if there is any space, they fill that with extra padding like bubble wrap and/or air pockets. This was the case on this order. Although the box these came in was relatively samll, they are kind of heavy for what they are. The last thing I wanted was for these to be moving around whilst in transit. Not with how Webike package items though, thumbs up for that one. The axle sliders arrived in perfect 100% condition as you would expect. ALl the manufacturing from Gilles is exceptional. They really do know how to make parts and make parts to the highest specifications and quality. They do not take much to fit them, simply a couple of bolts and away you go. If for any reason, these do see the tarmac, I know they are going to do their job as intended. Gilles, you are a superb brand and I am very pleased Webike stock your parts. Thank you Webike for the great service provided with this and all my other ordersView Detail
This was a part a friend asked me to get hold of for them. They are getting rid of most of the silver standard bolts and nuts that they can and replacing them with black ones of the same type.I found the part on Webike by accident really as I was looking for other parts.Nice find on my behalf I thought. Anyway, I always order more than one part per order as this cuts down on shipping costs. I opted for the EMS service as they are very good value and pretty quick in delivering. Everything arrived in a speedy timeframe within 5 days of placing the order. All the items in the order were packaged individually or in their own branded box, Evn though there was always going to be space in the box, Webike do the decent thing by adding extra padding to fill what they can. This stops any damage from larger parts hitting smaller, more delicate parts. Of course, everything arrived perfect condition as expected.This nut is clearly a quality item. I have had Gilles tooling parts before and have always been extremely happy with them, this was no exception. Really good quality anodizing, no weird coloured edges and the threads are silky smooth. Fitted in a couple of minutes to make sure the torque setting was correct.Customer is a very happy bunny. Thank you Webike for the awesome job you guys do.View Detail