 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
I used mostly this eight millimeter internal diameter clear breather hose made by Specials Parts Takegawa for my oil catch tank installation on my Honda Monkey 125. A tip to get nice clean straight cu...
This masking cap offered by Special Parts Takegawa came into use when carrying out the initial installation of oil catch tank kit as currently I have one unused port as I do not yet have my tappet cov...
When I first purchased my Honda Monkey 125 I was happy with the OEM air box so ordered the Special Parts Takegawa power air filter to pair with my after market exhaust. This power air filter worked we...
Nice bit a RED bling to add to your red Honda Monkey 125. Installation is as simple as wiping down your ignition switch removing the double sided tape backing lining up the ring and pushing it on. The...
Great quality but not a very cheap cylinder head gasket to purchase from Special Parts Takegawa for you 143cc big bore kit but a necessary one when refitting you head to cylinder after some maintenanc...
It's a great forged part. The quality is good and the packaging of the product is also good. However, when assembling, the speed metar cable may be a little short, so you need to check it. In addition...
The welds are neat and the design is nice. Also the quality is great.
bolts attached to the assembly are also of good quality and the fitting when installed is excellent. I think this is one of the...
When installing a tappet breather cover to the intake valve side of my engine I needed to vent the engine internal pressure via an eight millimeter hose to a five millimeter spout on my oil kit catch ...
When I am able to find nice little additions for my Honda Monkey 125 I really enjoy swapping out the OEM Honda parts. Most of these parts perform the same as the OEM Honda parts however the material t...
There are lots of camshafts available for the Honda Monkey 125 engine platform but you really need to decide how you want the engine to perform for how you use the motorcycle. The Special Parts Takega...
 |  |  |
| | | |
 |  |  |
| | | |
This 143cc piston kit from Special Parts Takegawa to suit their 56 millimeter bore cylinder is a kit containing a piston, piston ring set, piston pin and piston pin circlips. All that you need to fres...
Other companies' Emblem Bracket can be used for Horn relocation andIt was difficult for a novice to use it.But this Kit was easy to put on by myself.I worked on it at the same time as installing the d...
I had to wait over 3 months for delivery after ordering.Takegawa's Clutch has a different pitch from other manufacturers, so when I found this type, I fell in love with it at first sight.It was easy t...
The ADV150 Seat is stiff and I bought it to ease the burden.(Also, I personally didn't like Two-tone color's OEMSeat)It's breathable and comfortable, but it's also Cushioned, so it's more comfortable ...
The NORMAL Seat becomes steamy and uncomfortable after an hour of riding.I bought it because it was reasonably priced.JC92 will be M Size.The first thing I felt when I used the Seat cover was "My butt...
[How is it used?Used for 88 GORILLAWas the one you received as per Image?highWas the installation difficult?unspecializedHow was your experience with it?My last Clutch Cable lasted me about 10 years, ...
I used it as Repair Parts for GORILLA's Takegawa Clutch Kit.The Clutch Cable that came with the Kit was used for about 10 years. I put lubricating oil in it on the way, but it finally snapped in front...
[How is it used?I put it on my D Tracker 125.Was the installation difficult?Simply remove the Seat to install.How was your experience with it?Hip swelling can be reduced by about 20%.[Was there anythi...
The Instruction Manual is difficult to understand.The attached photo is WhiteBlack and pretty hard to tell.Wiring diagram is included, but it is hard for a layman to understand how the Plus power supp...
Size is perfect and very easy to work with. The price is cheap and it is a good sun protection.Also, stray cats often rested on my motorcycle, and their claw marks were always there.I'm glad I bought ...
 |  | |
| | | |
| |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
| | | |
| | | |
| | |  |
| | | |
 |  |  |
| | | |
I purchased a Special Parts Takegawa catch tank kit that was not designed for my motorcycle and required additional 13 milimeter hose clamps to complete the installation. It is great that the included...
It's not impossible to use, but it was easy to come off because the hook was too weak.I think it would have been easier to use if there were no bumps in the patches.
I use it to remove the Flywheel on my LEAD 100.There is a similar product, Band, Belt, or Type, but I would like to use the Pin type which is highly universal.I chose theThe pin diameter of this produ...
This tool is required to pack a piece of Non-Seal Chain.When you change the number of chain pieces in Sprocket, you will need to change the number of chain pieces as well.
I am happy with this tool from Special Parts Takegawa. Instead of taking the motorcycle to the repair shop I decided to buy the special tools required and do the job myself which has saved me money so...
I know some people reuse them, but I'm a Type who replaces them with new ones.The price is not bad either.
The maintenance tools I have for my 2018 Honda Monkey 125cc are a mixture of Kitaco and Special Parts Takegawa. I purchased the pulley holder from Special Parts Takegawa as Webike had a good special o...
I bought this one after buying other expensive ones to no avail. I am satisfied with it.
Scooter drivetrain maintenance essentialsWe can't start without it.KN Planning:KN KikakUniversal Holder SUZUKI Serieshttps://www.webike.net/sd/22644793/I bought it to use at the same timeEasy to use a...
There are two types of Recoil packets, 1D and 1.5D, but basically, if you buy 1D, it's not a problem There is none. Because even in JIS. The Bolt's cost is only 1D, as long as the female threads are i...
 | ||
| |
I bought a KIJIMA Helmet lock and installed it on the Tandem Footpeg and used it for a while, but the lock was too low for my use.It's not that KIJIMA Helmet lock is bad. The quality is good and it is...
 | ||
| |
Fashion costs. Style you have it or you don't. Wearing this Takegawa t-shirt you've got STYLE and FASHION without the cost! As Iv'e come to expect from Takegawa they have chosen a quality product to a...
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
About our "Mybike" service 
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING