TGR RACING WHEEL 軟式彈簧
When I changed to soft spring, it became fluffy, and the driving stability at high speed, which is the beauty of WR, was not so good. It was Large sturdy, though I installed it while fearing that theT...
 |  |  |
| | | |
TGR RACING WHEEL 強化彈簧
The rear has been replaced with their Shock at the same timeWhen Breaking, Front sinks at once, and Rear becomes floating, so you need to make it a little bit harder I bought it because it was too exp...
TGR RACING WHEEL 強化彈簧
The XG250 TRICKER's undercarriage parts were not much of a line up, butIt seems that Spring by SingleRate has finally been released and I bought it on impulse as soon as possibleIn a nutshell, my frus...
TGR RACING WHEEL 碟煞護蓋支架套件
By replacing the wheel with a TGRI bought it because I could no longer use the ZETA BracketI was hoping to use it because it looks just like ZETA in the pictureThe shape of the Wheel Collar was comple...
TGR RACING WHEEL 前叉強化彈簧
CRF250rally to MOTARDSpecOEMFront suspension has soft rear shock (TEC-3.1 PerformanceRear shock) At the same time, the exchangeAfter the exchange, it's time to enter and rise to the corner, breaking, ...
TGR RACING WHEEL Technix 避震器貼紙組套 (越野用)
I thought there were only three stickies in total, Front fork and Rear, but TGR and SKF stickers each Quantity:1 Set of 2pcFront fork and rear decals are also thicker, which helps prevent front fork s...
TGR RACING WHEEL Bleeding rod 前叉工具
I apologize firstI can't write about the details because it's in-play and still unused..It's convenient to use it because it's obvious that it's a white wire wrapped around a Stainless Steel wire It w...
TGR RACING WHEEL 強化彈簧
CRF 250 RALLY town ride & commuters can also be used for Funafuna Fork I could not stand it anyway I exchanged for TGR before and after suspension. I got on Racer with Number of reverse imports. T...
TGR RACING WHEEL Technix 避震器貼紙組套 (越野用)
For Front Fork also has thickness and protection effect is outstanding. Simple Rear shock Sub tank of WR 250 R became quite luxurious. This Recommendation.
 |  |  |
| | | |
TGR RACING WHEEL 塑膠製前叉預載調整器用板手 (32mm)
Functionally, it is no different from Straight's Glasses Wrench, butMaterial to avoid scratching the Fork cap:Plastic32mm is not a size that we use very oftenI used to protect it with Dustcloth and ti...
TGR RACING WHEEL 塑膠製前叉預載調整器用板手 (35mm)
I used it to invert the KYBIf you don't want to make the anodized part of a normal Gold genus Wrench into a mess, this is the one! reWhile there are some cosmetic questions, the satisfaction with the ...
TGR RACING WHEEL 塑膠製前叉預載調整器用板手 (35mm)
I haven't used this one either..But it's absolutely necessary, because I definitely don't want to be covered in scratches with Gold genus WrenchCosmetically, it's a good product and not a bad buyI'm n...
TGR RACING WHEEL 前叉上蓋扳手 (SHOWA 50mm)
This is for On road motorcycle, but it is for Off road motorcycle There is a length that can be usedI asked the manufacturer via Webig and he said it's available depending on the model of car It isHow...
TGR RACING WHEEL 前叉上蓋扳手 (SHOWA 50mm)
The Handlebar Clamp must be hit and the Clamp must be removed before it can be usedI chose this WrenchType Socket becauseWhile supporting the Handlebar with one hand with the Fork attached to the car ...
TGR RACING WHEEL 阻尼棒工具 (10/12/12.5mm)
The ROD of my Motorcycle was too thick to be addicted, I tried to buy it just to be sure but I'm a bit sorry, I think that it can be used with other Motorcycle so it can not be said that it is def...
TGR RACING WHEEL 前叉彈簧壓縮器
There are many people who are working in their own works, but once you buy it you can use it for a long time so I was happy to buy it, usability is good There is a sense of security, as expected it is...
TGR RACING WHEEL 阻尼棒工具 (10/12/12.5mm)
My Motorcycle (GSX-R1000 K3) ROD has too thick to be addicted, I was not worried because I can work even if it is disappointing but a bit disappointing.
? 
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING