多反射鏡面大燈單元(20211125)
Product # 62244
540.39 HKD (10,447 日幣)
定價 775.91 HKD 节省 30%
+104 Webike點數 (5.37 HKD)
匹配
Product # 62244
540.39 HKD (10,447 日幣)
定價 775.91 HKD 节省 30%
+104 Webike點數 (5.37 HKD)
匹配
●附件:H4燈泡 (12V60/55W)
※不可用車輛■xjr1300(全部)■xjr400(全部)■Zephyr1100(全部)
※本產品根據使用的燈泡不同,可能會造成車燈霧化。
※請勿使用超過40瓦的h.i.d.。可能會導致反光鏡被燒毀,鍍鉻脫落。
【訂購前注意】
訂購前,還請詳加確認您欲購買的顏色或款式。
商品多為下定後回覆交期,所以可能有商品停產之狀況。
訂單若因為廠商缺貨與暫時無法交貨等因素,則不會成立;訂單若沒有成立則不會收取任何費用。
【退換貨注意】
若您需要商品退換貨的服務,還請您至退換貨區塊進行申請;並請您保持商品外觀、用原包裝外箱封裝完好。
在收到您的退換貨申請時,我們會盡快派物流業者前去收貨。
【正品保證】
正品保證之商品,若有被查獲疑似為仿冒品,並經過相關訴訟,最後交由法院判決如實者,將會對購買此商品的顧客進行當初購買價格的10倍賠償。
本商品可將原廠的透鏡型大燈,升級為多反射型。
最新的設計技術可實現出色的燈光效果。
通過選擇內圈式組裝,可以將其安裝到本田和川崎原裝大燈上。
也可以使用隨附的螺絲和襯套將其連接到CB1300SF(98-02)。
Fits: KAWASAKI BALIUS2 98 [Frame No.] ZR250B-007001 to 014000, KAWASAKI BALIUS2 97 [Frame No.] ZR250B-000001 to 007000, KAWASAKI BALIUS2 05 [Frame No.] ZR250B-035001 to 038000, KAWASAKI BALIUS2 04 [Frame No.]ZR250B-028001 or later, KAWASAKI BALIUS2 03 [Frame No.] ZR250B-025001 to 028000
Compared with OEM, WaterproofRubber is too big, so it's not easy to fit,
Valve exchange etc etc. Light unit desorption at (3 places Bolt) It took three times more time.
Because it is a work while pressing Light a lot on the car body side ...
It is the first time for me to be tired so much
Assembling is Large strange! I will injure if I do not do it carefully.
Also, Cutline is out.View Detail
Fits: KAWASAKI BALIUS2 98 [Frame No.] ZR250B-007001 to 014000, KAWASAKI BALIUS2 97 [Frame No.] ZR250B-000001 to 007000, KAWASAKI BALIUS2 05 [Frame No.] ZR250B-035001 to 038000, KAWASAKI BALIUS2 04 [Frame No.]ZR250B-028001 or later, KAWASAKI BALIUS2 03 [Frame No.] ZR250B-025001 to 028000
As it used to be old Lens cut, it was very dark and it was hard to run such as Tunnel, so purchase with LED Light. Both DAYTONA.
It is quite bright.. Halogen is bright even if it is a multi-reflector, but the LED certainly feels twice. I am looking forward to running at night..
Also, I did not expect much, moreover, the product was like a plastic model, but when I installed it, Motorcycle feels pretty rejuvenating feeling.
The only disappointing thing was that we could not use OEM's Nut for installation, so we needed to buy two M5 Nuts. Well, it was about 150 yen. Also, I fix it by folding the nail, but because it creates a clearance and makes a mess, I doubled the WaterproofTape and then fixed the nail again.View Detail
Fits: KAWASAKI BALIUS2 98 [Frame No.] ZR250B-007001 to 014000, KAWASAKI BALIUS2 97 [Frame No.] ZR250B-000001 to 007000, KAWASAKI BALIUS2 05 [Frame No.] ZR250B-035001 to 038000, KAWASAKI BALIUS2 04 [Frame No.]ZR250B-028001 or later, KAWASAKI BALIUS2 03 [Frame No.] ZR250B-025001 to 028000
I exchanged this with DAYTONA from Ray Brick.
The reason is that this is not written in Light Anything was Simple.
The installation was on the Instruction Manual street, and it went easy!View Detail
Fits: KAWASAKI BALIUS2 98 [Frame No.] ZR250B-007001 to 014000, KAWASAKI BALIUS2 97 [Frame No.] ZR250B-000001 to 007000, KAWASAKI BALIUS2 05 [Frame No.] ZR250B-035001 to 038000, KAWASAKI BALIUS2 04 [Frame No.]ZR250B-028001 or later, KAWASAKI BALIUS2 03 [Frame No.] ZR250B-025001 to 028000
It is mounting to NC39 Specifications 2 but to Headlight rim It is mountable to the bolt. However, it could not be installed by interfering with the Bracket for fixing the Wiring of the Headlight case. I thought it was Wiring's handling, it took me about an hour to notice this.
Honda, Kawasaki I think that it can only be installed on the car Rim by Bolt - on so I should remove the compatible model column.
However, it was a good product that reminds me of the beginning that somehow universal product will be attached.View Detail
Fits: KAWASAKI BALIUS2 98 [Frame No.] ZR250B-007001 to 014000, KAWASAKI BALIUS2 97 [Frame No.] ZR250B-000001 to 007000, KAWASAKI BALIUS2 05 [Frame No.] ZR250B-035001 to 038000, KAWASAKI BALIUS2 04 [Frame No.]ZR250B-028001 or later, KAWASAKI BALIUS2 03 [Frame No.] ZR250B-025001 to 028000
It's a bit cheaper compared to PIAA and Ray Brick's Multi-reflector, so it's a good deal.
Plating is also firm and making Reflector itself is not bad.
Four difficult points.
1. Waterproof Cap is pretty loose.
If it faces downward it will fall off quickly.
2. Inner Rim's claws are thick and difficult to bend, and quite a power comes in to secure firmly.
3. It is Large strange to push in because Inner Rim's depth is small.
NC 39, but 5 mm has not arrived yet, I used Inner Rim of PIAA on hand.
Inner Rim of PIAA has more depth and Limit now fits. This one is also thinner nail and easier to bend so you can fix it neatly.
Without this Rim it could not be installed.
4. Shows the direction of Lens "TOP" The engraved mark is deck!.
Well, although it is the brightness of the bottom, LED BulbForce made by DAYTONA, though it is a comment on ray and comb, it is bright and Cutline, the irradiation range is satisfactory.
It was the right answer that got it in Manufacturer.
View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.