日本原裝 - 銥合金 火星塞 BPR7EIX 1198
Product # BPR7EIX
Product # BPR7EIX
四輪車使用的塞子主要是 "整體式 "或 "沖填式",兩輪車使用的 "螺紋式 "是 "分離式"。
"分離式 "的端子部分會脫落,但 "一體式 "或 "沖釘式 "的端子不會脫落。如果你試圖強行拆下它,終端部分可能會被破壞。
當把 "分離式 "作為 "螺絲式 "使用時,請取下端子螺母。
在使用端子螺母時,要確保它沒有松動,如果松動了,要用鉗子擰緊。
【nggk插頭的特點】--超 "寬范圍 "插頭--中心電極采用 "銅芯 "結構,銅芯被封閉在插頭尖端附近,以便快速散去大量熱量。
因此,實現了既耐燒又耐熏的超 "廣域 "插頭。比較有銅芯和無銅芯插頭的熱性能,有銅芯插頭的熱性能優於無銅芯插頭。耐污性好,耐熱范圍廣。塞子的熱值--采用熱值較高的新型陶瓷--氧化鋁瓷作為絕緣體。高溫下絕緣性能優良,保證火花。
。優異的導熱性能,防止過度烹調。
。熱沖擊(突然發熱。它耐急冷,具有優良的機械強度。-結構堅固、氣密性好--絕緣子與主要配件采用特殊粉末連接,具有良好的氣密性和結構強度。 電極由一種特殊的鎳合金制成,具有卓越的耐久性。- 絕緣體的波紋保證了絕緣性,並防止 "閃絡"--在停車時,在終端和主配件之間持續施加高壓。
較高的電壓往往會沿 "絕緣體 "表面泄漏,火花間隙之間所需電壓較高,容易引起閃絡。
為防止閃絡,增加絕緣子表面與主要配件之間的距離,設置絕緣子波紋以固定絕緣子,防止閃絡。什么是閃電俠?它是為了在終端和主配件之間產生火花,如圖所示。閃過■是什么原因讓插頭變得優秀。
[Features of NGK plug] |
- This is a super "wide range" plug - |
The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
■ Heat value of the plug |
- High alumina porcelain from New Ceramics is used as the insulator - |
- Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
- Strong and airtight in construction - |
Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
Special Nickel alloy electrodes are used for superior durability. |
- Corrugations in the insulator ensure good insulation and prevent flashover - |
During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
What is a flashover... |
It is a spark between the terminal and the main unit fitting as shown in the image. |
■ Flashover |
■The advantages of the plug |
Model Page Links
Fits: BETA EVO 2T 125 18- [Number required]1, BETA EVO 2T 250 18- [Number required]1, BETA EVO 2T 300 18- [Number required]1, BETA EVO 2T 300SS 18- [Number required]1, BETA X-Treiner 250 16- [Number required]1
OEM's Plug is the designation No. 6, but recently I made the Ignition coil a reinforced item, but I seemed to have bad Engine Response, I tried the first Plug on the trial.
As a result, the Response of the Engine got better and the way Torque became smoothed. Moreover, the engine startability was improved.
So, Coiletc. If you have strengthened the ignition system, it may be good to raise the Plug's count and see the state.View Detail
Fits: HYOSUNG RX125 99- [Required number]1, KYMCO Ve-Knocks 250 Required quantity]2, HONDA VFR750 displacement]750 [number of units required]4, HONDA VFR750F 90-93 RC36 [displacement]750 [number of units required]4, HONDA VFR800 98-02 RC46 Domestic model 98.4-02.1 [displacement]800 [number of units required]4
I was going to go for the standard OEM spark plugs for this service but when I saw the price of the iridium ones for the CBF1000, it was a no brainer to get these bad boys. These were easy to find using the tools provided by Webike and all the links to the manufactyrers websites.The cost was very good and purchased a set of 4.I have used iridium plugs before with great success as they seem to fire better than standard. I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice and snug. The plugs themselves are perfect. I have had some plugs befpre from overseas suppliers and generally, one of those had been a dud or just been broken during transit. Not this time. All 100% perfect and fired as they should. They do have a better performance than standard plugs but you would have to be a professional to actually notice the difference of the bat. Once fitted, the bike just feels smoother. Take your time and don't over tighten. One very happy customer. Thanks WebikeView Detail
Fits: HONDA HORNET-S PC34 European specification [displacement]600 [number of units required]4, HONDA HORNET 99-07 CB250F MC31 99.12-07 [displacement]250 [number of units required]4, HONDA XR250R 95- [displacement]250 [number of units required]1, HONDA VFR800 98-01 Reimport [displacement]800 [number of units required]4, HONDA VFR750R 87- RC30 [displacement]750 [number of units required]4
i have always used NGK Iridium Plug CR9EHIX-9 4273 spark plugs they are the best for long run.i have used this spark plugs on my honda cbr xx superblack bird 1998 model they work very well no maintainance required.View Detail
Fits: KAWASAKI 1400GTR 08-, KAWASAKI ER-6f 06-, KAWASAKI ER-6f 12-, KAWASAKI ER-6n 06-, KAWASAKI Ninja 650 12-21
I wanted to try out the iridium plugs on this old girl for my own peace of mind and to see if there is much difference between these and standard. These were easy to find using the tools provided by Webike and all the links to the manufactyrers websites.The cost was very good and purchased a set of 4. I have used iridium plugs before with great success as they seem to fire better than standard but never in this 2002 R1. I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice and snug. The plugs themselves are perfect. I have had some plugs befpre from overseas suppliers and generally, one of those had been a dud or just been broken during transit. Not this time. All 100% perfect and fired as they should. They do have a better performance than standard plugs but you would have to be a professional to actually notice the difference of the bat.Once fitted, the bike just feels smoother. Take your time and don't over tighten. One very happy customer. Thanks WebikeView Detail
Fits: HONDA HORNET-S PC34 European specification [displacement]600 [number of units required]4, HONDA HORNET 99-07 CB250F MC31 99.12-07 [displacement]250 [number of units required]4, HONDA XR250R 95- [displacement]250 [number of units required]1, HONDA VFR800 98-01 Reimport [displacement]800 [number of units required]4, HONDA VFR750R 87- RC30 [displacement]750 [number of units required]4
The cost was very good and purchased a set of 4.I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice.Thanks WebikeView Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.