日本原裝 - 標準型 火星塞 CR9E 6263
Product # CR9E
Product # CR9E
四輪車用的塞子主要有 "集成式 "和兩輪車用的 "沖填式",四輪車和兩輪車用的都是 "分離式"。
"分離式 "的端子部分脫落,但 "整體式 "或 "沖壓式 "的端子部分不脫落。如果你試圖強行拆下它,終端部分可能會被破壞。
當把 "分離式 "作為 "螺絲式 "使用時,請取下端子螺母。
在使用端子螺母時,要確保它沒有松動,如果松動了,要用鉗子擰緊。
【nggk插頭的特點】--超 "寬范圍 "插頭--中心電極采用 "銅芯 "結構,銅芯被封閉在插頭尖端附近,以便快速散去大量熱量。
因此,實現了既耐燒又耐熏的超 "廣域 "插頭。比較有銅芯和無銅芯插頭的熱性能,有銅芯插頭的熱性能優於無銅芯插頭。耐污性好,耐熱范圍廣。塞子的熱值--采用熱值較高的新型陶瓷--氧化鋁瓷作為絕緣體。高溫下絕緣性能優良,保證火花。
。優異的導熱性能,防止過度烹調。
。熱沖擊(突然發熱。它耐急冷,具有優良的機械強度。-結構堅固、氣密性好--絕緣子與主要配件采用特殊粉末連接,具有良好的氣密性和結構強度。 電極由一種特殊的鎳合金制成,具有卓越的耐久性。- 絕緣體的波紋保證了絕緣性,並防止 "閃絡"--在停車時,在終端和主配件之間持續施加高壓。
較高的電壓往往沿 "絕緣體 "表面泄漏,火花間隙之間所需電壓較高,容易引起閃絡。
為防止閃絡,增加絕緣子表面與主要配件之間的距離,設置絕緣子波紋以固定絕緣子,防止閃絡。什么是閃電俠?它是為了在終端和主配件之間產生火花,如圖所示。閃過■是什么原因讓插頭變得優秀。
[Features of NGK plug] |
- This is a super "wide range" plug - |
The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
■ Heat value of the plug |
- High alumina porcelain from New Ceramics is used as the insulator - |
- Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
- Strong and airtight in construction - |
Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
Special Nickel alloy electrodes are used for superior durability. |
- Corrugations in the insulator ensure good insulation and prevent flashover - |
During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
What is a flashover... |
It is a spark between the terminal and the main unit fitting as shown in the image. |
■ Flashover |
■The advantages of the plug |
Model Page Links
Fits: BENELLI TnT1130 04-, APRILIA SCARABEO50 4T 05-, bimota YB-7 Number required: 4, bimota SB6R Number required: 4, bimota SB6 (former Soviet Union intelligency agency) Number required: 4
About quality and texture - The CR9E spark plug from NGK is a standard resister plug with a heat rating of 9, made using high quality processes and materials.About the feeling of use - Having a different styled base then the original spark plug was what I needed to resolve my problem, I found the original spark plug would no longer full seat due to the step on the base and a migrated thread in the head. Changing to a spark plug with the same reach but a fully threaded base was the easiest way to over come this issue.Products to buy together - With the spark plug being a regular service item, key products to purchase when carrying out maintenance on my motorcycle would be crush washers, gaskets and the like as these products are cheap and convenient to have on hand.Difficulty of installation - The installation of the CR9E spark plug is an simple task that took 0.2 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is all that is required to firstly check the gap between the center electrode and the ground electrode and then install the spark plug onto the cylinder head.Cost performance and comparison with other products - I find the cost of all the products NGK sell to great value when compared to what most other companies sell their products for and the CR9E spark plug is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the CR9E spark plug, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
Fits: BENELLI TnT1130 04-, APRILIA SCARABEO50 4T 05-, bimota YB-7 Number required: 4, bimota SB6R Number required: 4, bimota SB6 (former Soviet Union intelligency agency) Number required: 4
I LOVE BUYING NGK PRODUCTS BECAUSE OF THE QUALITY, AND IN THE WEBIKE STORE IT'S EVEN BETTER, THE PRODUCT IS ALWAYS AVAILABLE AND AT THE BEST PRICEView Detail
Fits: BENELLI TnT1130 04-, APRILIA SCARABEO50 4T 05-, bimota YB-7 Number required: 4, bimota SB6R Number required: 4, bimota SB6 (former Soviet Union intelligency agency) Number required: 4
Since it is an OEM-adopted product, it installs without problems and maintains its performance with periodic replacement.
I replace it at the same time as the Air Filter when I feel that the fuel consumption is getting worse. I replace it at the same time as the air filter when I feel my fuel consumption is getting worse.View Detail
Fits: BENELLI TnT1130 04-, APRILIA SCARABEO50 4T 05-, bimota YB-7 Number required: 4, bimota SB6R Number required: 4, bimota SB6 (former Soviet Union intelligency agency) Number required: 4
Fits: BENELLI TnT1130 04-, APRILIA SCARABEO50 4T 05-, bimota YB-7 Number required: 4, bimota SB6R Number required: 4, bimota SB6 (former Soviet Union intelligency agency) Number required: 4
[How is it used?
I use it on my XJR400R every 10000km.
Was the installation difficult?
You have to remove the tank, so it is surprisingly large and strange. If you are not used to it, it will take a while.
How was your experience with it?
There is also a Windshield IRIDIUM, but I think the Standard Plug BP5HA is more suitable for a motorcycle that is almost 20 years old.
Other items that would be helpful
Point and hang of installation:It is good to do it while looking at the service manual or with someone who is familiar with it.
Items to buy together:Plug wrench, Torx wrenchView Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.