日本原裝 - 標準型 火星塞 D6HA 6512
Product # D6HA
Product # D6HA
四輪車用的塞子主要有 "集成式 "和兩輪車用的 "沖填式",四輪車和兩輪車用的都是 "分離式"。
"分離式 "的端子部分脫落,但 "整體式 "或 "沖壓式 "的端子部分不脫落。如果你試圖強行拆下它,終端部分可能會被破壞。
當把 "分離式 "作為 "螺絲式 "使用時,請取下端子螺母。
在使用端子螺母時,要確保它沒有松動,如果松動了,要用鉗子擰緊。
【nggk插頭的特點】--超 "寬范圍 "插頭--中心電極采用 "銅芯 "結構,銅芯被封閉在插頭尖端附近,以便快速散去大量熱量。
因此,實現了既耐燒又耐熏的超 "廣域 "插頭。比較有銅芯和無銅芯插頭的熱性能,有銅芯插頭的熱性能優於無銅芯插頭。耐污性好,耐熱范圍廣。塞子的熱值--采用熱值較高的新型陶瓷--氧化鋁瓷作為絕緣體。高溫下絕緣性能優良,保證火花。
。優異的導熱性能,防止過度烹調。
。熱沖擊(突然發熱。它耐急冷,具有優良的機械強度。-結構堅固、氣密性好--絕緣子與主要配件采用特殊粉末連接,具有良好的氣密性和結構強度。 電極由一種特殊的鎳合金制成,具有卓越的耐久性。- 絕緣體的波紋保證了絕緣性,並防止 "閃絡"--在停放期間,在終端和主配件之間持續施加高壓。
較高的電壓往往會沿 "絕緣體 "表面泄漏,火花間隙之間所需電壓較高,容易引起閃絡。
為防止閃絡,增加絕緣子表面與主要配件之間的距離,設置絕緣子波紋以固定絕緣子,防止閃絡。什么是閃電俠?它是為了在終端和主配件之間產生火花,如圖所示。閃過■是什么原因讓插頭變得優秀。
[Features of NGK plug] |
- This is a super "wide range" plug - |
The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
■ Heat value of the plug |
- High alumina porcelain from New Ceramics is used as the insulator - |
- Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
- Strong and airtight in construction - |
Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
Special Nickel alloy electrodes are used for superior durability. |
- Corrugations in the insulator ensure good insulation and prevent flashover - |
During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
What is a flashover... |
It is a spark between the terminal and the main unit fitting as shown in the image. |
■ Flashover |
■The advantages of the plug |
Model Page Links
Fits: HONDA MD90 Displacement] 90 [Number of units required] 1, HONDA Super Cub C90 66-80, HONDA Super Cub C90DX 71-80, HONDA Super Cub C90SDX 71-80, HONDA Benly CD125 66-77
I bought this to Refresh a vehicle that was given to me.
Too old? It also fits to HONDA BENLY50 C92III though it is not in the compatibility chart.
I was relieved to see that although the vehicle is 60 years old, the Plug is just as good as it is today.
So it's the same as the SUPER CUB 90 and the CD125 that was sold until recently.
Although it was called "Refresh", the Engine was not applied, but the Plug that originally arrived was pure black as shown in the picture, so it will surely live in the future.
The terminal nut is not included in the kit and is a screw type, so be careful if you have changed the plug cap.View Detail
Fits: HONDA MD90 Displacement] 90 [Number of units required] 1, HONDA Super Cub C90 66-80, HONDA Super Cub C90DX 71-80, HONDA Super Cub C90SDX 71-80, HONDA Benly CD125 66-77
Fits: HONDA MD90 Displacement] 90 [Number of units required] 1, HONDA Super Cub C90 66-80, HONDA Super Cub C90DX 71-80, HONDA Super Cub C90SDX 71-80, HONDA Benly CD125 66-77
Although only this part number goes into the Head of a ST90, the dandruff of the effect after exchange is also well satisfactory.Since the
Plug cord had also deteriorated, simultaneous exchange was carried out, but it could blow markedly and stage fright became good.
The Recommendation of the exchange can be absolutely carried out to the direction of an old Plug or a code.
View Detail
Fits: SUZUKI GSX-R125 18-21, SUZUKI GSX-S125 17-21, SUZUKI SV650 16-21, SUZUKI SV650X 18-21, SUZUKI V-Strom 650 17-21
스즈키 SV650용으로 여러가지 주문하면서 같이 주문했습니다. 품질좋고 가격도 저렴해서 아주 만족합니다.점화플러그는 품번만 맞으면되니 굳이 비싼가격에 스즈키판매점의 OEM제품이나 온라인몰보다 위바이크에서 구매하는걸 추천합니다.View Detail
Fits: HARLEY-DAVIDSON STREET750/XG750 15-, HARLEY-DAVIDSON XG750 15-, HONDA 400X 16-21, HONDA CB400F 13-, HONDA CB400X 13-21
Cheapest price I could find anywhere on the internet. Defenately Cheaper than in my country. I installed them in my Honda cb500f 2020 and I rode about 3000 km a;ready and feels good. I will check them after 12000 km when I will replace them, hope all is well. View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.