【規格】
・額定電壓:DC12V
・外徑尺寸:W25.5mm×H30.5mm×D15.5mm(※突起部分除外)
【套件內容】
・SPI-110 C1本體 ×1
・車種専用線組 ×1
・各種雙面膠
・使用說明書・保證書
※附件因套件不同而異。
在行駛過程中踩下離合器時,會顯示出離合器以外的所有擋位,但這並不是故障。
※開車時,請把安全放在第一位,避免前面的車輛大意。<在公共道路上使用時,請遵守交通法規行駛。
※請勿使用無電阻火花塞。如果使用沒有電阻的火花塞,可能會產生噪音,無法正確輸入旋轉信號,所以要使用帶電阻的火花塞。
※在安裝時,請按照說明書正確安裝。不正確的安裝將導致火災。它可能會導致故障。
※安裝本產品後,請定期檢查是否有缺失的零件。
*因使用本產品而引起的故障。因意外事故造成的損失,我們不承擔任何責任。先謝謝你的理解。先謝謝你的理解。
※※經寶得適檢測的車輛均為正常車輛。如果車輛配備了非原廠的售後零件,可能會造成問題。
*安裝時請務必確認摩托車維修手冊中的相關接線。
[Specification]
・Rated voltage: DC12V
・Outer diameter dimension: W25.5mm x H30.5mm x D15.5mm (*excluding protruding parts)
[Components]
・SPI-110 C1 main unit x 1
・Model Specific Harness x 1
・Various double-sided tapes
・Instruction manual
*Components vary by kit.
*When the clutch is depressed while driving, the display shows a gear other than the one in which the clutch is engaged, but this is not a malfunction.
*Prioritize safety while driving and do not be careless in front.
*Please do not use non-resistive spark plugs.If you use a plug without resistance, noise may be generated and the rotation signal may not be input correctly, so please use a spark plug with resistance.
*Please put the attached double-sided tape on the back side of this product to prevent water from entering because there is a switch.
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*After installing this product, periodically inspect it to see if any parts have fallen off.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*All vehicles that have been tested by Protec are stock.There is a possibility that a problem may occur if the vehicle is equipped with aftermarket parts other than stock parts.
*Please refer to the service manual of your motorcycle to confirm the respective wiring before installation.