POLICE3型 把手套件
Product # HBK625S-01
匹配
- CB400SF04-07 vtec III
- CB400SUPER BOLDOR05-07 NC39 vtec III
Product # HBK625S-01
匹配
【RS TAICHI商品注意】
Webike台灣為日本RS TAICHI正規經銷店家,本站所購買產品享有商品永久保修服務,非人為損傷瑕疵退貨(請於收到商品7天內申請退貨)。
(部分特殊機能商品之材料/材質無法進行修復,如防水機能等,如需要保修服務前請先詢問。
【訂購前注意】
訂購前,還請詳加確認您欲購買的顏色或款式。
商品多為下定後回覆交期,所以可能有商品停產之狀況。
訂單若因為廠商缺貨與暫時無法交貨等因素,則不會成立;訂單若沒有成立則不會收取任何費用。
【退貨注意】
若您需要商品退貨的服務,還請您至退貨區塊進行申請;並請您保持商品外觀、用原包裝外箱封裝完好。
在收到您的退貨申請時,我們會盡快派物流業者前去收貨。
【正品保證】
正品保證之商品,若有被查獲疑似為仿冒品,並經過相關訴訟,最後交由法院判決如實者,將會對購買此商品的顧客進行當初購買價格的10倍賠償。
【商品內容注意事項】
本商品部分實拍照片乃拍攝自同系列商品,故顏色可能不同,但各項功能均相同。確切顏色請參考網頁上方之商品圖片。
Model Page Links
Fits: HONDA CB400SUPER BOLDOR 08-13 NC42 (without ABS), HONDA CB400SF 08-21 NC42 vtecRevo(without ABS)
OEMHandlebar is difficult to drive and tiring, so we replaced it.
I replaced it myself.
Easy to remove Handlebar, easy to remove Clutch Wire
The problem is the Accelerator Wire.
I can't see it when I take the tank off to look at it… I can't even get my hands on it…
As a result, the Throttle Body was removed and replaced.
This process was also deathly large and strange…
Handlebar, Axel and Clutch Wire
Brake hose replacement
It took me six or seven hours to finish everything.
If you have the Gold and the time, let the SHOP do the work! (Lol)
I love the Position! But the mounting holes for the Switch?
Maybe I'm not good enough. (Lol)View Detail
Fits: HONDA CB400SUPER BOLDOR 05-07 NC39 vtec III, HONDA CB400SF 04-07 vtec III
I bought it used.
1:HandlebarBody
2:Long clutch wire
3:Long Accelerator Wire
4:Extension horn harness
5:Stainless Steel Mesh Brake Hose Extension
More than 5Quantity:The Horn harness was not included in the set, but I was able to install it.
Replacing the Clutch Wire and Stainless Steel Mesh Brake Hose is easy, but even as a former mechanic, I had to pull the carburetor so far out of the carburetor because the Accelerator Wire was so Large strange to replace.
If you're not confident in your maintenance skills, get a motorcycle shop to do it for you.
Brake hose replacement is also dangerous from a maintenance standpoint, so I recommend you to have a PRO do it.
The photo shows a comparison with the manufacturer's Quarter3
I liked the position of the Handlebar, but the aperture is so different!
The aperture was too tight, so I replaced it immediately.
The dimensions are published on the manufacturer's website, but the numbers don't tell the whole story.
HandlebarSingle Body and may be sold at motorcycle supply stores, so you should check it out in person.
The height of the Handlebar is also limited to ±4cm in terms of vehicle inspection, which is over, so CB400SF (NC39) is apparently not allowed.
That's all I have to say for this evaluation.View Detail
Fits: HONDA CB400SUPER BOLDOR 08-13 NC42 (without ABS), HONDA CB400SF 08-21 NC42 vtecRevo(without ABS)
The vehicle inspection required a structural change; OEM 72cm, this item is 80cm
The expiration date of the vehicle's inspection was shortened by nearly a month, which meant a three-hour line for structural changesView Detail
Fits: HONDA CB400SUPER BOLDOR 08-13 NC42 (without ABS), HONDA CB400SF 08-21 NC42 vtecRevo(without ABS)
All necessary Kit for POLICE 3 type can be included. Position is also very easy and it is satisfying Large. However, Accelerator Wire (Throttle Cable) In the old days the carburetor side think that it is quite difficult even for those who are familiar with the installation. If it is an amateur, firstly impossible. I asked PRO for it. In the place where PRO says CBSeries is a 4 cylinder and Cable runs in the middle, so it is said that carburetor and FI relationships in the old days are removed so much that it is troublesome for PRO. I thought Accelerator Wire was unreasonable so I left everything to you. In addition to ask Brake hose and Clutch Cable, the labor cost was 30,000 yen. Both Handlebar Brace and HandlebarSide cap unified in Red. The color is 100% satisfied.View Detail
Fits: HONDA CB400SUPER BOLDOR 05-07 NC39 vtec III, HONDA CB400SF 04-07 vtec III
I installed it in CB 400 SB NC 39. Since the age is 50 years old, I bought this product because the waist was hard even at OEM's CB Handlebar which is not Separate handle.
With OEM's Handlebar, waist and shoulders became tight when riding for two hours, but this totally disappeared instead of this Handlebar.
However, I think RidersTile seen by Race with just feelings alone at the pass etc. It is cool in a pose! I think that OEM or Separate handle is good if you think.
In my case, I have a tough waist, but I like White by buy and I bought CB, so I think that the Handlebar which is now higher, than the Handlebar changed, I wish I was going to be behind → Whether it was a car inspection ?I do not know?
Since I am addicted to amateur Maintenance, I thought that I should attach it by myself, but as Accelerator Wire installation did not remove carburetor or shift it, after all I got Motorcycle shop to attach it.
I am satisfied with this product Large.
View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.