強化VBelt
Product # 77711
匹配
- PCX15012 [Frame No.] KF12-1000001 to 1099999 KF12
- PCX15013-20 [Frame No.] KF12-1100001 to 1199999 KF12
Product # 77711
匹配
Model Page Links
Fits: HONDA PCX150 12 [Frame No.] KF12-1000001 to 1099999 KF12, HONDA PCX150 13-20 [Frame No.] KF12-1100001 to 1199999 KF12
We attached Belt of PCX 150 to TIGRA 125
◆ Issues and Prospects
? In TIGRA I would like to manage CVTBelt's early damage when it is easier to output the largest Large output by rearranging Pulley etc. which governs the shift characteristic - - - -
Compared to TIGRA OEMBelt, long life is aimed by incorporating a reinforced Belt made of DAYTONA made of PCX 150 with a width of 1 mm and a thickness of 1 mm and a length of 8 mm Oversize.
◆ Impression
I can expect very much about Belt strength.
When taking pictures and comparing it, we can see Fiber flow of reinforcing fiber in Rubber itself in the cog part. Although it is said that side pressure resistance is increased by fiber reinforcement even in product introduction, it is convinced.
? It is about 300 km after installation but it is in good shape for now
? The engine speed at the maximum Large acceleration is reduced by about 1000 rpm. The WR was changed from 10 g to 9 g and restored. (NORMAL seems to be 11 g) )
? TIGRA has reduced the engine braking, which is a strong story, and Smooth
? Belt seems that it is not too long even if you are watching it by hanging on the Engine
? I am not interested on the highest speed side
◆ Preparation
? Using DrivenPulley on Thailand Honda's PCX 125
In order to make this Belt reasonable, I got the Driven Pulley side of PCX 125 of Thailand Honda, got the Needle bearing used in TIGRA, changed it and used it.
? Drive side Pulley extra processing
It is necessary to match with the thickened Belt. Zero emphasis on starting acceleration and does not target maximum speed Spec. is. A 2 mm thick Belt also fits perfectly by cutting with a lathe so that it contacts the entire surface near the center of Drive pulley with Belt. Angle is 15 ° to fit PCXDriven.
? Clutch meat To raise the rotation speed
We will incorporate KN project PCX Spring into TIGRAOEMClutch
? Reinforced Center Spring of high revolution operation
Combine 10% Reinforced Center Spring for KITACO's PCX
◆ Comparisons
? Belt dimension comparison
- TIGRA KN 20 mm x 815 mm (Measured circumferential length)
- PCX150 DAYTONA 22mm x 823mm (Measured circumferential length)
- The thickness of Belt is about 1 mm thick for PCX
? Driven of PCX is 1. 7 mm Movable area is Large
? Driven diameter of PCX is 4 mm Large
? TIGRA Driven is convex on the inner limit of the Belt contact surface, (Stopper?) PCX is FlatView Detail
The quality and texture is very good .You can feel the cvt systems transfer is batter.I buy this with Daytona high speed pully and Dr pully 12g.If you have pully tools that is easy installation.But that is expensive than oem .The shipping and packaging is very good.View Detail
Fits: SUZUKI Address V100 00, SUZUKI Address V100 01, SUZUKI Address V100 01, SUZUKI Address V100 02, SUZUKI Address V100 03
I ordered a belt, it arrived in 2 weeks, the belt is very high quality in the packaging, I haven’t installed it yet, I recommend buying itView Detail
Fits: SUZUKI Address V100 00, SUZUKI Address V100 01, SUZUKI Address V100 01, SUZUKI Address V100 02, SUZUKI Address V100 03
About quality and texture:Durable compre from stockAbout the feeling of use:Material aramid strongProducts to buy together:Roller set DaytonaDifficulty of installation:EasyCost performance and comparison with other products:Value for moneyAbout shipping and packaging:Fast and safeAny concerns, cautions, or advice when purchasing:Always repeat order for this beltView Detail
Fits: SUZUKI Address V100 00, SUZUKI Address V100 01, SUZUKI Address V100 01, SUZUKI Address V100 02, SUZUKI Address V100 03
About quality and textureHigh quality material compare to other brandAbout the feeling of useMore lasting for daily use or performance Products to buy togetherBuy together with Daytona rollerDifficulty of installationMechanic do it for meCost performance and comparison with other productsThe cost more value and can last longerAbout shipping and packagingPackaging very good in box and bubble wrapAny concerns, cautions, or advice when purchasingThis is the best option for performance with good priceView Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.