前擋泥板和穩定器可以用螺栓固定在ohlins φ43直立式前叉上,適用於xjr1300或zrx1100/1200。快速釋放的可伸縮夾子。a2017s從頭開始加工。輪胎和擋泥板的間隙可以通過設置夾子位置向上或向下調整。205mm和210mm兩種前叉跨度,適用於使用ohlins φ43直立式前叉的 "忍者 "Katana等定制車輛。
貨叉span參考典型車型數據
■205mm
川崎:zrx1100/1200 zz-r1100c/d
鈴木:89 gsx-r750/1100
■210mm
。川崎:zephyr1100
雅馬哈:xjr1200/1300
其他:雕塑-z帶柄。
The NITRO RACING ceiling mounted front fender to be bolted on to the stock GSX-R or GSF1200 forks.
This front fender can also be used with the NITRO RACING stabilizer to fit a variety of machines.
The stabilizer is available in three different anodized aluminum colors to match the color of your machine, for a total of nine different combinations.
There are two types of front fender shapes: naked and racing.
□A2017S Machined from geralumin.
□The brake pedal stroke is properly secured for better control of the rear brake.
□The stainless steel return spring helps to improve the response of braking input feeling and prevent dragging when braking repeatedly.
□M8 pillow ball is used for the rear master push rod to prevent the bolt from breaking.
□The new change rod is made from A2011 hexagonal material and is machined to high strength and high durability specifications.
□The pedal shaft is equipped with a bearing system for smooth and reliable operation.
□The rear brake switch is a reliable mechanical type designed for each model of vehicle (sold separately).
□The NITRO RACING rearset series is designed to be used in the event of a fall, and all the repair parts, including the step bar and even the bolts, can be purchased separately.
NITRO RACING offset sway bar to match the new Ohlins upright fork.
By installing a ceiling-suspension front fender, it became possible to install a non-stock front fender on Ohlins upright forks.
The stabilizer is available in three different anodized aluminum colors, for a total of nine different combinations, allowing for more individual customization to meet the needs of a wide variety of machines.
Two types of fenders are available, naked and racing.
It will create an attractive Ohlins world.
Adjustable to accommodate fork spans from 205mm to 210mm.
It can be used for Z series, NINJA, KATANA and other custom vehicles which use Ohlins Φ43 upright fork.
You can adjust the clearance between the tire and fender by changing the offset brace and clamp position up or down as desired.
[Forkspan Reference Typical model DATA]
■205mm
KAWASAKI: ZRX1100 / 1200 ZZ-R1100C / D
SUZUKI: 89' GSX-R750 / 1100
■210mm
KAWASAKI: ZEPHYR1100
YAMAHA: XJR1200 / 1300
Other: Vehicles with stem for SCULPTURE-Z