規格:
排氣管材質:鈦合金
排氣管徑:φ42.7
尾管外徑:φ60.5
消音器材質:Grenade鈦合金V-3
附屬部品:
排氣管1台分
・集合部
・尾管
・彈簧8本
・消音器
・尾蓋擋板
・消音器束環
・消音器支架
・平過濾器蓋和卸油螺絲套件
【安裝條件】
油底殼:更換
機油濾心交換:集合部要拆裝
中駐:不可
在發貨時,末端擋板已經安裝在消音器中。<錐形鈦合金消音器v-1/v-2/v-3沒有消音帶,因為支架是固定的。
Nitroracing消音器上的消音擋板不得拆除。同時建議定期檢查和檢修消音器內部的消音棉。<手榴彈鈦合金消音器采用直徑90mm的消音帶安裝。
你需要改成單一類型的後步。在這種情況下,從標准品換成本產品時,需要將串聯台階的框架剪掉。
在已經安裝了硝基賽車1型串聯階梯支架套件的車輛上,由於安裝板的焊接固定位置,消音器的上部和串聯階梯套件可能會相互干擾。建議使用串聯式階梯支架套件2型。
根據閃爍器的類型,可能會對消音器產生干擾。在這種情況下,需要更換閃光燈。
你需要把機油濾清器蓋和放油螺栓換成平型。平蓋和排水套件包含在 "產品 "附件中,所以在安裝消聲器時要更換。
Exhaust pipe material: Titanium
Exhaust pipe diameter: Φ42.7
Tail pipe outer diameter: Φ60.5
*The end baffle is pre-installed on the silencer at the time of shipment.
*Conical titanium silencers V-1 / V-2 / V-3 do not come with a silencer band as a bracket is pre-installed.
Never remove the exhaust baffle from the NITRO RACING silencer.It is also recommended to check and overhaul the silencer's internal sound deadening wool on a regular basis.
The grenade titanium silencer will be mounted with a φ90 silencer band.
It is necessary to change to a single type rearset.In this case, it is necessary to cut off the frame of the pillion step when you replace the stock one with this product.
For bikes already equipped with the NITRO RACING Pillion Step Bracket KIT Type 1, the upper part of the silencer and the Pillion Step KIT may interfere with each other due to the welding position of the mounting plate.It is recommended to use Pillion Step Bracket KIT Type 2.
Depending on the type of blinker, it may interfere with the silencer.In this case, you will need to replace the blinkers.
The oil filter cover and drain bolts must be changed to a flat type.The Flat Cover & Drain KIT is included as an component of this product and should be replaced when the exhaust is installed.