適用於10英寸1型前叉
加強型直立前叉,適合大功率發動機部件。
27個10"(1型)直立前叉
叉子a長度:539mm`外管b:256mm
叉子油量:75cc`叉子油粘度:40mm2/s
■Monkey.Gorilla Bar手柄套件
Monkey.如果是猩猩桿只用手柄的類型,在猴子的情況下,需要去掉普通的折疊手柄,單獨購買手柄管。大猩猩可以安裝一個標准的手柄。<正常的前擋泥板可以安裝。
組件詳情
上橋/轉向桿
陽極氧化鋁處理。
袋子的背面有輕微的打孔。
帶轉向鎖支架。
貨叉間距:174mm
車輪連接寬度:149mm
鼓式剎車規格
鼓式剎車規格
剎車板與剎車臂原裝配件
鼓式剎車的規格是普通的鼓式剎車轂照樣使用,剎車板和剎車臂都是原廠件。
剎車板采用鑄鋁桶處理`剎車臂采用鍛鋁拋光處理。
其他配件需另行購買
直立式前叉用直徑27mm大燈支架(09-03-007)
直立式前叉用閃爍器支架(05-08-0002)
此閃爍器支架為普通指標`sp竹川定制。這兩個指標都是可以附加的。
換上spTakekawa 10英寸輪轂或spTakekawa 12英寸輪轂是必須的。
sp竹川前擋泥板必須單獨購買。
在鼓式剎車的情況下,需要選裝6mm的墊片以使前輪居中。
6mm墊片(06-09-1302)
輪轂需要對准輪轂(10英寸輪轂)
在此下載pdf文件
sp竹川12英寸輪轂
適用於10英寸輪轂。φ27直立式前叉套件與`sp竹川制造的12英寸輪轂相匹配。<不過,使用的輪胎僅限於maxxis的12寸扁平胎,在sp木川有售。<其他尺寸的輪胎時,可能會與前叉的外管發生干涉。另外,"sp "竹川制造的前擋泥板可能會影響輪胎,可能無法安裝。
要獲得輪轂中心(12 "輪轂要求)
點擊這里下載pdf文件
。
■Type1 Front Fork for 10inch
Reinforced upright front forks suitable for high power engine parts.
The Type 1 front fork uses the same free valve type damping force generation mechanism as the larger models to improve stability and reduce shock on rebound.The use of DU metal greatly improves the operability and the structure has high potential for racing use.
For 10" Φ27 upright front forks (type 1)
Fork A Length: 539mm, Outer tube B: 256mm
Fork oil quantity: 75cc, Fork Oil Viscosity: 40mm 2/S
Kit for Monkey Gorilla Bar Handle
In case of Monkey, you need to remove the normal folding handle and purchase the handle pipe separately.Gorilla can be installed with stock handlebars.
The stock front fender can be installed.
■Details of each part
Top bridge/steering stem
Duralumin machined with anodized finish.
The back side is lightly punched.
With steering lock bracket.
Fork pitch: 174mm
Wheel Mounting Width: 149mm
drum brake specification
Drum brake panel and brake arm are original parts
For the drum brake specification, the stock drum brake hub and brake shoes are used without modification, and the brake panel and brake arm are original parts.
The brake panel is finished with cast aluminum barrel and the brake arm is finished with forged aluminum buffing.
■Parts purchased separately
Headlight bracket for Φ27 upright fork (09-03-007)
Φ27Blinker bracket for upright fork (05-08-0002)
This blinker bracket can be used for both OEM blinkers and SP Takegawa's custom blinkers.
It is necessary to change to SP Takegawa 10 inches wheels or SP Takegawa 12 inch wheels.
SP Takegawa Front Fender must be purchased separately.
For drum brakes, a 6mm spacer (sold separately) is required to center the front wheel.
6mm spacer (06-09-1302)
■To get the wheel center (10 inches wheel use condition)
■About the installation of SP Takegawa's 12-inch wheels
The Φ27 upright front fork kit for 10 inches wheels is also compatible with SP Takegawa's 12-inch wheels.
However, the tires to be used are limited to the MAXXIS 12-inch flat tires sold at SP Takegawa.
When other tire sizes are installed, they may interfere with the outer tube of the front fork.Also, SP Takegawa front fender may interfere with the tire and may not be able to be installed.
How to get the wheel center (under the condition of using 12 inches wheel)