後避震
Product # KA128
10,309.73 HKD (199,398 日幣)
定價 10,793.17 HKD 节省 4%
+1994 Webike點數 (103.09 HKD)
Product # KA128
10,309.73 HKD (199,398 日幣)
定價 10,793.17 HKD 节省 4%
+1994 Webike點數 (103.09 HKD)
**因供應商資料問題,OHLINS商品可能會出現網站商品圖片與實際款式不同的狀況,建議購買前向客服確認詳細資訊。**
※此商品為歐洲供應商直接採購、進口。因此若訂單成立,本站恕不接受取消該訂購。
※若您於商品訂購前,有任何問題;舉凡商品內容、規格、交期等,請透過商品諮詢進行確認。
【訂購前注意】 訂購前請詳加確認欲購買的顏色、尺寸等等資訊。 商品多為下訂後回覆交期,所以可能有商品停產,或需長時間等待商品出貨之狀況。 訂單若因廠商缺貨與暫時無法交貨等因素,則不會成立;訂單沒有成立則不會收取任何費用。 商品自訂購至出貨須經過多道運送流程,因此有可能產生包裝在運送過程中變形、破損,但商品本體完好、可正常使用之情況。 商品可能發生製造商變更規格、外觀設計,導致包裝或本體造型與商品頁面圖片不同之情況。 若因製造商變更產品設計、規格,導致商品無法發揮訂購時預期之功能,還請您與本站客服諮詢後續處理。 【退貨注意】 若您需要商品退貨的服務,還請您至退貨區塊進行申請;並請您保持商品外觀、用原包裝外箱封裝完好。 在收到您的退貨申請時,我們會盡快派物流業者前去收貨。 【正品保證】 正品保證之商品,若有被查獲疑似為仿冒品,並經過相關訴訟,最後交由法院判決如實者,將會對購買此商品的顧客進行當初購買價格的10倍賠償。Model Page Links
I bought the OHLINS TTX39 after saving a lot of money, but it has been lying in the corner of my room for a long time because of the troublesome installation process. The Switch was forced to put in the motivation this time, and finally arrived at the installation.
First of all, the 14R Custom is the standard OHLINS, and I couldn't think of any other choice because it's been adopted as OEM.
The Adjuster can be installed in the same position as the OEM.
That's why I look at the Parts List and buy OEM parts such as Bracket, Clip and Bolt separately.
The first thing you need to do is to lift the car with the Center Stand.
This was the only time I regretted putting full fuel in the car. It's pretty heavy.
The next step is to remove the OEMSuspension, but the Swing Arm needs to be lifted to release the load on the suspension, so jack it up.
Remove the upper bolt of the OEMSuspension, then remove the LowerLink arm and the lower bolt and the suspension can be removed. Be careful not to drop the suspension on the hard ground, as it will fall with more force than you can imagine.
It was Large strange to work alone to remove the LowerLink arm of the incidental work.
The LowerArm is structurally fastened with Bolt & Nut, so you need to make sure you don't rotate either One Side. Fortunately, I had an extra-long spanner, so I managed to use the ground to deal with it.
The installation is just the reverse of the basic procedure, but the TTX39 is not easy to install from the bottom because of the large size of the tank.
It's like a circle of wisdom that you canApproach at various angles and manage to get in.
Then you can easily install the lower bolt and lower arm by penetrating the extra-long driver for the upper position.
If you tighten the top and bottom bolts with the prescribed torque, the body installation is complete.
Preload Adjuster installation is done by referring to the OEM and installing the Bracket first.
When attaching the adjuster to the bracket, make sure that the wire cable does not interfere with the suspension or the body of the car and that the cable is not bent or twisted at a steep angle.
Clip is done if you put it in the position where the adjuster's Cable will move to free.
Impressions of use.
However, the OHLINS TTX has a finer texture, better suspension movement, and a more refined ride quality.
The biggest benefit of this is that it is much easier to adjust the pre-road, so it can be adjusted to suit the weight of the luggage.
View Detail
Although I got a few cars from kawasaki car from the past, I chose OHLINS for purchasing ZZr 1400 this time. For installation, hook the Center Stand and bite the tree on the bottom of the Tire and loosen the Bolt and shift the bottom LINK, you can lower the Normal Suspension. Although OHLINS installation is the reverse, it was a little wisdom ring state whether the Reserve tank is Large or not, but it was safe to install. It's about an hour. Now I am in the Setting, I tried to make it all loose, but I was not able to ride and ride it. Because it is 176 cm, 84 kg, it may be okay to keep it worn. COM. Adjustment of REB is DialGold and Black, but not by turning it but by turning the 3 mm Hexagonal Wrench inside. The person who wrote earlier is "I can not turn it" I was writing, I could not even turn it. In the manual, there was explanation of the type that is slightly unkind and turning Dial type and hexagon, but this type is not written as this type. So I purchased Long Type's Hexagonal Wrench and it became easier to adjust. Now it's easier to get on a little. I will set it a little more in the future.
View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.