Narrow 2型- Φ 7 / 8 英吋鋼製把手
Product # HB0046B-80
255.42 HKD (4,940 日幣)
定價 268.35 HKD 节省 5%
+49 Webike點數 (2.53 HKD)
有庫存 (合作廠商庫存). |
Ships around 2nd Apr. 2024? |
Product # HB0046B-80
255.42 HKD (4,940 日幣)
定價 268.35 HKD 节省 5%
+49 Webike點數 (2.53 HKD)
有庫存 (合作廠商庫存). |
Ships around 2nd Apr. 2024? |
Model Page Links
【What made you decide the purchase?】 That it was a car model exclusive item. It is OK if NAKED is good, but as Cowl comes in, MASTER etc. interferes in many cases, but it is saved that there is no worry about that.
【How was it actually used?】 Too narrow. Because the width of Normal handle was too wide, I made it narrow Narrow 2, but the iris was too tight and it got like American like ride.
【Was it difficult to install? (Hard parts case)】 Handlebar itself has Switch hole and Center also has mark, so it was very easy to install.
【Please tell me the point of installation and hang (in the case of Hard parts)】 As TMAX 530 removes the parking brake from the Left Handlebar Switch, the operation becomes Large, so it is better to leave Phillips Bolt 1 pc and fix it.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] I challenged to improve the Riding Position, but it did not follow the imagined Position.
【Hope for Manufacturer - Please let me know if there are any improvement points】 I think that it is inexpensive and good quality products. I am indebted to you since I was a student and I want you to keep up well.
【Have you compared items?】 TMAX 530 exclusive European type 1 Handlebar
[Others] I tried the Flat continental 1 type, but MASTER interfered with the car body and could not be used. I am thankful for the exclusive use car model.View Detail
Fits: YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E -99 (drum brakes), YAMAHA TW200 -99 (drum brakes), Others Universal
It was not suitable for me, although it is a part that cannot be helped because it is something that cannot be understood until it is put on.
The atmosphere is that of a family car.
I thought it was too narrow for me.
Also, if you do not extend both the Throttle Cable and Clutch Cable on the vtr250, the Cable will stick out when the handlebar is fully locked and the RPM will increase.View Detail
Fits: YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E -99 (drum brakes), YAMAHA TW200 -99 (drum brakes), Others Universal
[How is it used?
The width of the OEM Handlebar of 250TR was too wide and it was difficult to ride, so I replaced it with this product.
Was the one you received as per Image?
It was an inexpensive product, so I bought it on the spur of the moment, without taking detailed measurements.
When it arrived I thought it looked good.
Was the installation difficult?
I asked a colleague to install it.
Some drilling is required such as Switch box.
How was your experience with it?
There's more aperture in the Handlebar than I expected, and I think it's a little yankee chic, but
After riding for a while, I was able to change the position to one that was easier to grip and less fatiguing, and I was satisfied.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
I have no complaints, the product is covered by a transparent film, but the product seal is directly attached to the handlebar body, and the type of seal is not cleanly peeled off, so it left sticky residue.
Parts cleaner would be nice to have.View Detail
Fits: YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200E -99 (drum brakes), YAMAHA TW200 -99 (drum brakes), Others Universal
I put it on the ZOOMER!
The STD Handlebar is a bit awkward for women to drive, so we went with this Handlebar. (^^)
It makes driving so much easier!
If I had to say, I would have made the Handlebar a little more Up because the length of …Hose was a little too long.
But I'm happy with Large! (^^)
View Detail
Fits: YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA TW200 -99 (drum brakes), YAMAHA TW200E -99 (drum brakes), YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required, SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
I replaced it from StandardHandlebar to APE 100.
I arrived without problems.
Angle than Standard.
Height, Length do not change very much.
As the Handlebar approached, the posture got a little easier.
After that, I cut each end of Pole 3 cm at a time and shortened, but because I made it short, I have a pain when I have a Handlebar and my wrist is twisted outward. Everyone please think about the angle and purchase.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.