CLR 排氣管前段 (單品)
Product # 301KPECGAA0000
6,517.63 HKD (126,000 日幣)
定價 7,138.35 HKD 节省 9%
+1260 Webike點數 (65.17 HKD)
Product # 301KPECGAA0000
6,517.63 HKD (126,000 日幣)
定價 7,138.35 HKD 节省 9%
+1260 Webike點數 (65.17 HKD)
Fits: YAMAHA XJR1300 07-12, YAMAHA XJR1300 03-06, YAMAHA XJR1300 03-12, YAMAHA XJR1300C 15-16
What made you decide to buy?
I wanted a Hand Bent Full Exhaust System, but
I didn't want a fancy burn color
Because it was ideal Visual
How was your experience with it?
It's a good way to get out of the carburetor, and with a little tweaking of the carburetor, it will be even better
Was the installation difficult?
If you can remove the normal muffler, I think you can do it in one hour Small Clearance is pretty tight
It looks like the '99 doesn't fit, but I was able to install it with no problem
【Please tell me the installation point and hang】
Temporarily install the exhaust pipes numbered 1 through 4 first
The Flange nut is still at least hand-tightened
Next, we'll insert the assembly
There will be a grouping area on the Right Side from the Center
Install the assembly so that the lower side of the assembly is horizontal
When installed in the correct position, the projection of the oil pan comes to the center of the assembly part, so that it is an exquisite It is not hit by Clearance The end pipe is inserted and Silencer is added to the end of the pipe, and the clearance between the end pipe and the frame is changed to After securing the silencer, fix the silencer and tighten the flange nut to complete the process
Flange nut tightening torque is 2 kg
Degrease the exhaust pipe to prevent oil seizure
[Was there anything that disappointed you?
I wouldn't go so far as to say it's a disappointment
I wish the end pipe was a little more angled
(direction of the take-up)
[Accessories]
Aluminum FlangeQuantity:1 Set of 4pcs., 8 Exhaust Spring, Tandem FootpegUp Stay (Quantity):Pair (for Left and Right) (e.g. "I'll be back")
Instruction manual with photo
Do you have any wishes or improvements you would like to make for the Manufacturer?
Dare I say, bender scratches? I hope it doesn't have any marks like the lines attached vertically
I don't mind, but …
[Do you have any products to compare it to?
DT SilencerFull Exhaust of OHNISHI HEAT MAGIC system
[Others]View Detail
Fits: YAMAHA XJR1300 07-12, YAMAHA XJR1300 03-06, YAMAHA XJR1300 03-12, YAMAHA XJR1300C 15-16
What made you decide to buy?
I wanted something from Hand Bent, but I had an unreasonable ideal that I wanted to avoid the fancy burnings Because, CLRExhaust System was ideal Visual
How was your experience with it?
It has been a full exhaust system for kFACTORY until now, but
Since both the exhaust pipe and the end pipe have become thicker, the goodness of the exit is felt
Was it difficult to install? (In the case of hard parts)
It's not hard, you need Spring Remove or Socket wrenchetc But if you are used to it, you can do it in an hour, I think
What is the point or hang of installation (for hard parts)?
Temporarily install 4 exhaust pipes and insert the 4-1 assembly part, but at this time Attach the 4 exhaust pipes to the Right Side from the center of the body There is a protrusion on the oil pan that may be the Guard, and the protrusion is the Center of the assembly It was able to be installed without any contact with the exquisitely clearances
Enclosed
Material:4 Aluminum Flanges and 8 Stainless Steel Springs
OEMTandem Footpeg 2 Plates for repositioning
An Installation Instruction Manual was enclosed
If you don't want to use it because of the O2 sensor hole, you will need a separate Blind plug
[Was there anything that disappointed you?
Price, installation accuracy, visual, all are satisfactory
Do you have any wishes or improvements you would like to make for the Manufacturer?
Another User mentioned it in the imprint
There are vertical lines on my purchase that seem to be attached to the bending process I don't mind them, but I think they are better without them
[Do you have any products to compare it to?
New Type of OHNISHI HEAT MAGIC
Full Exhaust System with short end
View Detail
Fits: YAMAHA XJR1300 07-12, YAMAHA XJR1300 03-06, YAMAHA XJR1300 03-12, YAMAHA XJR1300C 15-16
It's Titanium and it's so light.
Looking at this product in the image, a very thick Exhaust pipe
Although it looks very lively, it actually wears
When I try it I feel just fine.
Spring and Flange are included
Because O2 Sensor 's Bolt was sold separately,
Carburetor Vehicles should think that you should be careful.
With machine bended this curve is wonderful!
It is good missing that you can imagine from the thickness
There was a vertical line in the Exhaust pipe
Welded BEET was bogoboko
I was worried whether to buy by looking at Review,
Although there was a vertical line indeed, I totally
I did not mind and the welding was amazing
It was beautiful! In selling with Silencer-less
COSPA was also a good product that could satisfy Large change.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.