- 改裝零件
- 傳動系統
- 鍊條相關零件(車鏈)
- MINIMOTO
- MINIMOTO - 鍊條相關零件(車鏈)
- 商品列表
- 鏈條拆裝工具組
鏈條拆裝工具組
Product # 3755
Product # 3755
所有部件都整齊地存放在專用的存儲箱中。
It was written in the previous instalment that it was broken immediately, or that it was crimped while seeing how it worked, but it is not a tool set for Chainfor Replacement in the first place.
As for the quality, it's not something that breaks immediately, so it's good. is cracked.
There's no such thing as a Pin for Crimp, even if you carefully put in a Plate, and it seems to divert a Pin for Cut, but I'm afraid!
The tip of the crimp pin is flat, so if you're not careful, the crimp part of the chain pin will crack and you'll have to start over from scratch.
There seems to be a reason for the low price, and I'd rather pay the same Gold amount to the store to replace it than buy this one, which is more reliable and secure.
You can use it as a Chain Tool, but you should consider that it can't do press-in and Crimp.View Detail
It is used with the D Tracker 250 and has a chain size of 520.
It broke after one use.
Originally I would have liked to return it because it was defective, but the price was low and I was able to crimp it, so I give up.View Detail
Used in 525 Size
Cut is used after skipping the pin head with a sander The pin is easily removed
Crimp is taking it a little bit easier (Pin head diameter) Crimping will be done without any problems If you think about the structure of the chain and the way the force is applied to it, it will not be broken is unlikely Something and Scissors to use! I believe that the tool will only answer you if you use it correctlyView Detail
Before using the tool, carefully observe the crimp and the tool and see if it is still usable You will need As others have imposed, without worrying about Chain's Crimp shape etc Crimp height and diameter should be adjusted to match the height and diameter of the crimp part Compare with Dice and check the surface where CrimpPunch touches Crimp part Make sure that the Crimp Tool is in contact with the Center of the Crimp and tighten in 0.5 rotation The Chain Tool requires more force but is easier to work with Please go while you are there It takes a little more care than expensive tools, but it is possible to do it without breaking anything After the work is done, check the caulking area carefully for cracks or cracks If you are only trying to save money, please contact a reputable motorcycle dealer to do the work Your life is at stake
View Detail
I used it for Chain replacement work of 530 Size.
Because it was a good atmosphere, I bought it and used it was not satisfactory.
Only Cut can be done easily, but press fitting and Crimp are useless.
Although press-fitting is impossible, the part holding down Plate turns round, the two holes are empty Plate is made with the position of Pin and Large crimp of Limit, so it is difficult to do thoroughly.
Body turns when Crimp work is done to Crimp width specified by Manufacturer. So you will not be able to do the next work.
I think that this item will be disposable so it is better to buy other items or exchange the Chain by paying the fee at the shopView Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.