Micro LED方向燈 (Ver.1)
Product # 1107516
119.49 HKD (2,310 日幣)
定價 130.87 HKD 节省 9%
+23 Webike點數 (1.18 HKD)
當訂單成立時,我們將確認製造商的庫存並透過e-mail發送確認出貨時間給您。
Product # 1107516
119.49 HKD (2,310 日幣)
定價 130.87 HKD 节省 9%
+23 Webike點數 (1.18 HKD)
Model Page Links
Although it fixes with back lining Nut during installation, the foundation is fragile, as the base is tightened, the base has come off the base.
I managed to fix it myself but I had to raise Quality a little more though it was cheap!
Sorry!View Detail
Large taste shape It is a very nice feeling Cool.
Drilling is necessary for installation but it is easy and very easy.
I am pretty pleased with the start.View Detail
I tried to buy this Rin Parts Rin Parts Micro LED Blinker Ver1 intrigued by the appearance cuteness, but the light emits a strong light rather than cute but dazzling.
Daylight - I think that it can be used for Position and Blinker, but it may be better to lower the amount of light a little.
Especially, always lighting Daylight - When using to Position, Body's Material : Since Aluminum Body is heated and it becomes hot, Recommendation for installation on a windy place where it is easy to dissipate heat.
Of course, I think that it is a good decision to lower the light intensity and limit heat generation.
The whole body of this Rin Parts Rin Parts Micro LED Blinker Ver1 is made of Material : Although it is made of Aluminum, since the LED element is designed to dissipate heat as it is weak to heat, it is a product that can be expected for durability if it does not get as hot as possible.
As a result of doing several lighting tests to wiring this Rin Parts Rin Parts Micro LED Blinker Ver 1, I saw the rectification diode on the Minus side as 1 pc. , Plus side branched into two lines and Daylight - I thought that it is just good to limit the light intensity and heat generation by connecting two rectifier diodes in series to Wiring for use in Position.
The same effect can be expected by using constant current Diode or resistance, but from the aspect of Cost surface and simplicity durability and suppression of heat generation, using three inexpensive rectification diodes I think that it is Simple to limit the current.
In addition, I saw the White lighting product of exactly the same appearance as this Rin Parts Rin Parts Micro LED Blinker Ver 1 at \ 475 yen at other site.
I do not know the reason for its cheapness, but there must be some reason for sure.
I will recommend to be used after being devised to suppress the heating value of Body itself which is interested in this Rin Parts Rin Parts Micro LED Blinker Ver1 including saying.
This Rin Parts Lynn Parts Micro LED Blinker Ver 1 is not sure where to make a maid in.
It is making, designing and price not like JAPAN.
Once installed in the Motorcycle, it is not easy to burn the LED, right?.
I think that it is necessary in advance.
Rectifier Diode is 1 pc in electronic parts PartsCenter etc.. I sell for 15 yen. (I use 1000V1AX 3 pieces)
.View Detail
【What made you decide the purchase?】
This RinParts MicroLED Blinker is an unusual Type LED Blinker among various commercially available Blinkers.
It's pretty cute, so I bought it.
【How was it actually used?】
While considering how to install it, it is occasionally lighting and playing, but this RinParts Rin Parts Micro LED Blinker is quite bright LED.
【Mounting was difficult?】
In order to install it, it will be to open a hole of Φ 10 mm or to use the existing Φ 10 mm hole, but I'm thinking where to put it.
We have not installed yet, but due to the structure the installation will be large and it will not be difficult.
【Please tell me the installation point and hang】
Since this RinParts Rin Parts Micro LED Blinker seems to be highly waterproof, it seems to be Large sturdy even if you install it without worrying even where it will hit the rain.
When installing, I think that installing in a good position of the wind street which is easy to dissipate heat and applying Loosen Tightening Lock tite to the Nut for fixing is Large Off Point.
[Is there anything I was disappointed about?]
As I knew, this RinParts Rin Parts Micro LED Blinker has only two wires, so I can only use either Blinker or Position lamp.
Although it is possible to make a circuit so that Blinker and Position lamp can be used together, Diode is required separately.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Since it is a point, since it is now, Wiring is still appreciated, it is possible to have Tale lamp, Stop lamp and Wiring of Minus line as three lines from the beginning.
【Have you compared items?】
I compared it with various Blinkers observed by Net and Shop.
This RinParts Lynn Parts Micro LED Blinker gives orthodox and elegant light.
[Others]
Still for a while, I do not have the courage and opportunity to install this RinParts Rin Parts Micro LED Blinker in the Motorcycle, but let me report it again with Impression.
.View Detail
【What made you decide the purchase?】
Round at love at first sight Blinker pretty Small (Lol)
There was no necessity, but I bought it because it was cute.
【How was it actually used?】
Small is pretty and pretty, it is a blinker that you can use firmly with a lot of light intensity.
I tried energizing test, but it is dazzling light when energizing 12V.
【Mounting was difficult?】
This RinParts MicroLED Blinker Ver 1 Body is a product that can be installed easily by inserting it if there is a hole of Φ 10 mm and tightening with Reverse side from Nut.
The power source draws a line from BlinkerWiring of Motorcycle and Quantity : Pair (for Left and Right) It is easy because it just connects so as not to make a mistake.
【Please tell me the installation point and hang】
Body of this RinParts MicroLED Blinker Ver1 is made of Material : Since it is Aluminum, if you attach it to the Aluminum part of Motorcycle or attach it to a place with good wind, you can use it with the intended cooling capacity of the product.
If you apply Screw Loosening Prevention Agent to Gold Made Nut that stops at Reverse side, it will be hard to loosen so it is safe.
In addition, we sell that genus Nut in DIY Heat resistant Material : If you replace it with PlasticNut, even if there is no Screw loosening prevention agent, its heat resistant Material : As you tighten PlasticNut it will be fixed while being distorted by stress Material : PlasticNut becomes very difficult to loosen.
[Is there anything I was disappointed about?]
Although I did not understand it by appearance, the exterior was for Material : It was heavily unexpected because it is Aluminum.
【Hope for Manufacturer - Please let me know if you have any improvement points]
The appearance shape remains the same, I think that it can be used as an auxiliary light for Daylight and Stop-lamp if there are products with different luminescent colors.
【Have you compared items?】
Compared to various Blinkers of other companies, but there is not any other CustomizationBlinker finished compactly more cute than this RinParts MicroLED Blinker Ver1.
This RinParts MicroLED Blinker Ver1 is a very simple, rounded and lovely Blinker, and as a LED Blinker it is a very cheap Blinker as well as more than other companies' products in terms of price.
.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.