材質:鋼製
開關孔已加工
全寬:730mm
全高:40mm
後拉:65mm
內傾(後拉)角:23度
固定座安裝有效寬度:135mm
外徑:Φ28.6
握把套部内徑:Φ18mm
附儀表上襯套
特別設計的管徑階梯式與各部件相匹配
用螺栓固定,使前負荷增加位置更緊湊!
。與正常位置相比
35mm向下75mm向前
左右握把端之間的車把寬度減少了35mm。儀表安裝時增加5度擠壓角
利用提供的項圈,將儀表升起。
。電纜可以保持原樣
,並與颶風屏和儀表傳輸支架一起安裝。
*-16 在型號變更前適用。
※手柄直徑為φ18mm時,需要一個側蓋。
※由於結構總寬度將改變20mm以上,所以需要提出結構變更申請。
在圖片中,顏色為黑色。
※安裝圖僅供參考。
Material: Steel
Pre-drilling Switch
Overall Width: 730mm
Overall Height: 40mm
Pull Back: 65mm
Inner Input (Stop) Angle: 23-degrees
Holder Mounting Effective Width: 135mm
Outer Diameter: Φ28.6
Grip Part Inner Diameter: Φ18mm
with Meter Up Color
It is an exclusive product with a pipe diameter steeped according to each part.
It is a bolt on and compact weight gain position!
Compared measurement to the STD parts position.
35mm Down 75mm Forward
The handle width between the left and right grip end is 35mm narrower. The squeezing angle is plus 5-degrees
It is mounted the meter by the included collar.
It is possible to use the standard cable.
It is possible to mount together with the HURICCANE screen, meter movement bracket.
*It correspond to 2016 model change.
*It requires side cap separately for handlebar inner diameter ϒ18mm.
*It requires an application for structural change because it replaces over 20 in total width.
*The color of the product on the attached photo is: Black.
*The attached photo of the product is for reference only.
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING