擺臂重量:正常情況下3.5kg至1.8kg(對於格羅姆`三平方`+0cm)
擺臂采用7n01鋁材,1.8kg,而原廠擺臂為3.5kg,重量輕,剛性強。更輕的重量提高了摩托車的操控性。
選項
【搖臂處理】
.黑色陽極氧化處理(gCraft部件號:60198)+25,000日元
。Cerakote Finish (gCraft #60807) +30000日元
【什么是Cerakote?】
CeraCoat是目前美軍使用的一種特殊烤漆。
經測試,該塗料能應對惡劣的環境,在開發過程中注重 "耐熱性"、"耐磨性"、"耐久性"、"散熱性 "和 "絕緣性"。
陶瓷材料經專用機器粉碎後,混入塗料中,以提高漆膜的強度。這使表面呈現出類似珍珠皮的光澤,但塗層可以很薄(25微米)
焊接痕跡(珠子)可以不被隱藏地留在表面。
這種表面的附着力在所有塗層材料中是最高的,即使彎曲也不會起皺,即使是踏石也不容易掉漆,所以適合 "框架 "擺臂。
*正常交貨時間為3-5周。
【方案1】【方案1】鏈條滑塊用螺栓固定(gCraft零件號:60228)+1000日元
將鏈條滑塊由鉚接改為螺栓固定。磨損後容易更換。
【方案2】【方案2】樞軸部滾針軸承型(gCraft No.60192)+3000日元
標准型是將軸套的樞軸部改為滾針軸承。
更耐用,運行更平穩。
【選購件3】立鉤底座(m6)(gCraft部件號60903)+3000日元
可在底座上安裝gCraft立鉤或外置立鉤(m6)。
【方案4】【方案4】增加乘坐高度調節懸架功能(gCraft部件號60057)+5000日元
改變乘坐高度調節功能,上下調節寬度為7.5mm。
通過移動山體部分,可以輕松改變車輛的後部高度。專為nsr50/80後避震器設計。
Swingarm Weight: Stock 3.5kg→1.8kg (for GROM, triple square, no sway bar, +0cm)
The swingarm is made of aluminum 7N01 material and it is 1.8kg lighter than stock swingarm 3.5kg.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Pivot part needle bearing specification (G-Craft part number: 60192) +3000 yen
The standard is to change the pivot part of the bushing to a needle bearing.
Improved durability and smooth operating characteristics.
[Option 3] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Option 4] Ride height adjustable suspension mount function addition processing (G-Craft part number: 60057)
It is changed to the suspension receiver with the height adjustment function of 7.5mm.
By moving the mountain part, you can easily change the rear ride height.*Exclusively designed for NSR50 / 80 rear shock.