這是一個擺臂,可以用來安裝在猴子/猩猩上的`nsr50/80輪。
擺臂的寬度為184-187mm。<可以使用nsr50/80的12英寸輪轂將 "Monkey "改裝成12英寸輪轂。
可選的描述
【搖臂表面處理】
【搖臂表面處理】
。黑色陽極氧化處理(g-craft部件號:60198)+25,000日元
。Cerakote Finish (gCraft #60807) +30000yen
【什么是Cerakote?】
CERACOAT是目前美軍使用的一種特殊烤漆。
經過嚴苛條件的測試,在設計和制造上注重 "耐熱"、"耐磨"、"耐用"、"優良的耐溶劑性"、"散熱"、"絕緣 "等性能。
陶瓷經特殊機器粉碎後,混入塗料中,以提高漆膜的強度。這使得表面像珍珠皮一樣,但漆膜可以很薄(25微米)
有可能在表面留下焊接痕跡(珠子)而不隱藏它們。
附着力在所有塗層材料中是最高的,而且表面處理後即使彎曲也不會起皺,即使是墊腳石也不容易掉漆,適合 "框架 "擺臂。
※請比正常交貨時間多3-5周。
【選購件:鏈條滑塊選購件】
鏈條滑塊與螺栓連接(gCraft零件號:60228)+1000日元
鏈條滑塊可由鉚釘連接改為螺栓連接。磨損後容易更換。
【選購件:立鉤底座附加件】
修改立鉤底座(m6)(gCraft零件號:60903)+3000日元
G-Craft立鉤或外置立鉤(m6)可附加。
【選配:樞軸結構】
樞軸軸承類型(gCraft零件號:60006)+3000日元
軸套的樞軸部分默認改為軸承。
堅固耐用,運行平穩
【選項:鏈拉選項】
鏈拉選項
。賽車立鉤(gCraft零件號:60186)+3000日元
鏈條的後端換成了立鉤,gCraft零件號:32071.32072.32073賽車立鉤可以連接。
*G-Craft Part No: 33170ap Lockheed caliper support cannot be installed (it interferred)
。後拉式(gCraft部件號:60221)+3000日元
後拉式調整器設計為消除鏈條調整的麻煩。
調整螺母位於擺臂的末端,使原來因工具干涉而難以轉動的調整部位變得方便。
*不能與OW型鉤子一起使用。 OW型(gCraft部件號:60014)+3000日元
通過錐形拉鏈器,消除了軸的垂直運動。
錐形面板移動,防止垂直運動。這種機構也被用在大自行車的擺臂上。
ow型拉鏈腳架(gCRAFT #60188)+5000日元
ow型拉鏈的背面改成腳架掛鉤。
G-Craft Part No.32071.32072.32073可以安裝賽車架掛鉤。
*G-Craft Part No: 33170ap Lockheed caliper support cannot be installed (it interferred)
。偏心鏈(gCraft #60199)+6000日元
這是川崎摩托車上常用的偏心鏈拉手。
*使用盤式時,只能使用連接到擺臂底部的卡鉗支撐類型。
*寬幅輪的擺臂只能用於盤式。
This is a swingarm that can be used with NSR50 / 80 wheels on Monkey / Gorilla.
Swingarm width is 184-187mm.
Using the 12 inch wheel of NSR50 / 80 to convert the Monkey to 12 inch can be done.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Pivot section structure]
Pivot section bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
[Options: Chain pull specification]
Chain pull option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the last part of swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools.
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60199)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.
*Swingarm for wide wheel can be used only with disc specification.