一共有三個鏡面調節部件,可以根據自己的喜好調節角度。後視鏡可以360度旋轉,在通過擁堵路段時,可以使車寬變窄,停留部分可以立即折疊起來。鏡面為藍色透鏡,可以減少以下車的光線和陽光的眩暈。根據車罩的加工工藝,可用於各種類型的汽車。
顧名思義,3pa鏡有三個活動點,可以變換成各種形態。通過使安裝寬度寬敞,可以安裝到多種車輛上。3pa鏡面有電鍍和黑色兩種。鏡面均為藍色。它可以減少陽光和後續車輛的眩光。鍍鉻後視鏡為車體增添了華麗的形象,這在復刻型後視鏡中實屬罕見。黑色的人體鏡面可以搭配多種人體顏色。
安裝要點1
每款產品都提供了安裝膠,但遺憾的是不能兼容所有車型。
在Ninja250的情況下,後視鏡的橡膠部分將用於原廠後視鏡。在附着的橡膠下面使用正品橡膠。
如果附着的橡膠不適合你的車,你需要使用墊圈來安裝。
每個接入點
1軸:啟動車體安裝點(圖中左上角)。
2軸:手臂連接點移動(右上)。
三軸:可操作車體安裝點(左下角),可對後視鏡進行微調。
*為了避免向左調整鏡子時出現松動,請務必用扳手(8毫米)在末端將其牢牢擰緊。
藍光鏡的好處 有些從來沒有使用過藍光鏡的人可能會覺得藍光鏡很難看。如果你從來沒有用過藍光鏡,你可能會覺得 "我不覺得我看不清楚"。
但目前的情況不同。晴天的時候,光線減弱,很容易看清,就像戴着墨鏡看一樣。 隱車的光線很亮,如果你直視它,可能會被它灼傷眼睛片刻。
在這種情況下,藍色鏡片可望減弱光線。
安裝3pa鏡時,由於有三個活動點,鏡面的定位非常困難。
雖然我們這次安裝的車自然是安裝在可以保證後方視野的位置,但是在坐車的時候,要用工具將後視鏡的三個地方擰緊,還是有一定難度的。所以,在定位鏡子的時候,我想請朋友幫忙。家庭:讓你的女朋友幫你...首先,松開所有的活動部件。
米勒應該由可以幫助你的人持有。用戶應以正常的駕駛姿勢上車定位。之後,他在固定的位置進行最後的緊固。
如果你只向一方求助,會節省你的時間。
There are three mirror adjustment points in total, so you can adjust the angle to your liking in detail.The mirror surface can be rotated 360 degrees, so when passing through traffic, the mirror surface can be turned 180 degrees to narrow the width of the vehicle, and the bracket part can be folded immediately. The mirror surface has blue lenses to reduce the glare of following vehicles' lights and sunlight.You can use it for various models depending on the modification of the cowl.
As the name suggests, the 3PA Mirror transforms into various forms with its three movable parts.You can install in many models by making the installation width more roomy. Unlike plastic products, aluminum is a high-quality finish with a sense of weight that does not make you feel cheap.The 3PA mirrors are available in plating or black.Both mirrors are blue. It is effective in reducing the glare of sunlight and following vehicles.The chrome mirrors, which are rare for replica type mirrors, add a gorgeous image to the vehicle body.The black body mirror matches with a wide range of body colors.
Tips of installation 1
The product comes with a mounting rubber, but unfortunately it is not compatible with all models.
When fitted to NINJA 250, these mirrors use the same rubber parts that are used on the stock mirrors.Use the stock rubber under the supplied rubber to install.
In this case, it is necessary to use a washer if the attached rubber can not be used.
Each access point
1 axis: Vehicle body attachment point in operation (upper left of image), the mirror angle can be roughly adjusted.
2 axis: The arm attachment point can be moved (upper right image) to adjust the height and protrusion from the vehicle body.
3 axis: Vehicle body attachment point can be moved (bottom left of image), fine adjustment of the mirror unit can be done.
*Be sure to use a wrench (8 mm) to tighten the mirror securely at the end, as it will loosen when the mirror unit is adjusted by turning it to the left.
Advantages of Blue Lenses If you have never used blue lenses, you may be wondering, "Isn't it kind of hard to see?There are some people who think that.
But the current situation is different. On a sunny day, it reduces the light and makes it easy to see as if you were looking through sunglasses. The light of HID vehicles is very bright and if you look directly at it, it may burn your eyelids for a moment.
In such a case, blue lenses can be expected to reduce the light effect.
When the 3PA mirror is installed, it is very difficult to position the mirror because there are three moving parts.
The tested vehicle wears it on the position which can be seen from the back, but it is very difficult to tighten the three parts with a tool while riding. So, please ask your friend, family member or lover to help you to position the mirror.First, loosen all the moving parts.
The mirror should be held by the person who will help you.The driver should be positioned in a normal riding posture in the vehicle.After that, it is finished by tightening at the fixed position.
You can save time by having someone help you with just one side.