燈泡型式:H9/11
色溫:6500K
亮度:2700lm
車檢對應
【附件】
・LED燈泡
・驅動單元
・雙面膠
*本產品經檢驗合格,但可能被檢驗員判定為不合格。在進行安裝之前,請注意這一點。<本產品適用於帶鹵素閥的DC(直流)12V摩托車,6V和AC(交流)摩托車,即使是帶鹵素閥的四輪車也不能使用。
*請勿修改本產品使用。請勿跌落或過度用力或損壞。如果損壞,可能會造成傷害,降低產品的功能,縮短產品的使用壽命。同樣適用於線束的加工和延伸。(不包括在保修范圍內)
*購買前,請參照尺寸圖,確保與燈罩的距離以及大燈箱內和大燈箱後的空間足以滿足原廠安裝燈泡燈罩的車輛。當你把車把向左或向右極限移動時,你還需要檢查前叉和車把之間的空間。根據車輛的情況,可能需要拆除原廠的遮陽板,並改變大燈箱內和後面的線路。
*本產品所含的驅動單元可能會產生一些噪音。安裝時要遠離儀表等數字設備。
*被點燃的燈泡是熱的。關閉閥門後不要立即更換閥門。它可能會造成傷害和燒傷。
※本產品根據大燈類型不同,亮度或顏色可能會有所不同。
*鹵素燈泡大燈配備了鹵素燈泡燈罩和透鏡切割。有可能發出的光是反射器或 "鹵素燈泡 "的切線所看不到的。
*有一個以上燈具的車輛,左右同軸燈泡的色溫必須匹配。
.ng例)左側(led燈泡(低))/右側(原廠鹵素燈泡(低))
.ok例)左側(led燈泡(低))/右側(led燈泡(低))
※安裝在寶馬等外國車上時,由於耗電量不同,車身一側的系統會運行並亮起。在某些情況下,"Bullet-Out "警告燈會點亮。
*可在30°C至90°C的溫度范圍內使用,兼容7v至17v的電壓。
當電壓低於7v時,"閃絡 "和 "穩壓器故障",如果電壓超過17v,穩壓器故障輸入的過電流,可能會造成損壞。
Valve Type: H9/11
Color Temperature: 6500K
Brightness: 2700lm
[Components]
・LED Bulb
・Driver unit
・Double-sided tape
*This product is compatible with bike inspections, but some inspectors may deem it incompatible.Please be aware of this before installing the product.
*This product is only for DC12V motorcycles with halogen bulbs.This product is not for use with 6V or alternating current (AC) motorcycles or automobiles, even if they use halogen bulbs.
*Do not modify this product for use.Do not drop, apply excessive force to, or scratch the product.Damage to the product may result in injury, degradation of the product's function or shortened service life.The same applies to the modification and extension of the harness.(Not covered by warranty)
*Before purchasing, please make sure that the shape of the bulb matches the type of bike you are installing and that the distance to the shade and the installation space inside and behind the headlight case are secured for bikes with stock bulb shades by referring to the dimensional drawing.It is also necessary to check the space between the handlebar and the front fork when the handlebar is moved to full swing right or left. Depending on the bike, it may be necessary to remove the stock shade and change the wiring inside or behind the headlight case.
*The driver unit attached to the product generates some noise.Install the unit away from the meter and other digital devices.
*The bulb that was lit is hot.Do not replace the bulb immediately after turning it off.Doing so may cause injury or burns.
*The brightness and luminous color of this product may vary depending on the type of headlight when lit.
*Halogen bulb headlights have a shade or lens cut for halogen bulbs.The LED element is placed in the same position as the filament of the halogen bulb, but because the light emitted and the brightness and color temperature change, the cut line of the reflector and the light that was not visible with the halogen bulb may appear in the irradiation light depending on the type of headlight.
*For bikes with two or more lamps, match the color temperature of the left and right coaxial bulbs.
・NG example) Left side (LED bulb (Low)) / Right side (stock halogen (Low))
・OK example) Left side (LED bulb (Low)) / Right side (LED bulb (Low))
*When the product is installed on an imported foreign bike such as BMW, the system on the bike body side may not work due to the difference in power consumption and the light may not turn on or the light may turn on.
*Can be used in temperatures from -30°C to 90°C.It can be used for voltages from 7V to 17V.
*If the voltage is less than 7V, flushing occurs, and if an overcurrent exceeding 17V is input due to regulator trouble, it may also cause damage.