- 改裝零件
- 排氣系統(排氣喉)
- 排氣管尾段(排氣喉)
- BEAMS
- BEAMS - 排氣管尾段(排氣喉)
- 商品列表
- Power Trek 消音器
Power Trek 消音器
Product # G224-22-004
2,932.21 HKD (56,686 日幣)
定價 2,932.21 HKD 节省 0%
+567 Webike點數 (29.32 HKD)
Product # G224-22-004
2,932.21 HKD (56,686 日幣)
定價 2,932.21 HKD 节省 0%
+567 Webike點數 (29.32 HKD)
*請使用原廠防燙蓋和安裝螺栓。
*如圖所示,該產品也可與Touring Serow的後或架一起使用。
*桶身外殼由不銹鋼製成,只有尾端由鈦製成。
【訂購前注意】
訂購前,還請詳加確認您欲購買的顏色或款式。
商品多為下定後回覆交期,所以可能有商品停產之狀況。
訂單若因為廠商缺貨與暫時無法交貨等因素,則不會成立;訂單若沒有成立則不會收取任何費用。
【退換貨注意】
若您需要商品退換貨的服務,還請您至退換貨區塊進行申請;並請您保持商品外觀、用原包裝外箱封裝完好。
在收到您的退換貨申請時,我們會盡快派物流業者前去收貨。
【正品保證】
正品保證之商品,若有被查獲疑似為仿冒品,並經過相關訴訟,最後交由法院判決如實者,將會對購買此商品的顧客進行當初購買價格的10倍賠償。
Model Page Links
Style that is not too assertive that OEMHeat Guard can use, discreet volume and pleasant sound quality.
Embracing has been reduced and it is very easy to ride.
Just riding it makes me feel excited.View Detail
The main reason I bought this can was that it allows for fitting of the stock heat shield which I find attractive and practical. I read some buyers have difficulty fitting this shield but allow me to give you useful advice. When you begin, line up the plastic guard screw first, put a few turns on it but do not tighten. Do the same for the other four screws and you will find everything lines up nicely. The sound is a little deeper and at slow speeds the fuelling seems smoother too. I love this can.View Detail
The main reason for my choice is the availability of OEMHeat Guard.
I was wondering how the sound quality and performance would be. It was more than expectation though I thought and installed it. The connection with PowerBoxExhaust pipe of the simultaneous purchase is also no problem.
It is a good feeling with moderate increase in volume and appearance texture.
As a result, I am satisfied with the Large correct combination.View Detail
【attachment】
It was easy to use the OEM Exhaust Guard, and the Guard is very easy to twist and bend, so it is important to tighten it evenly.
SP Tadao Exhaust pipe can be installed without OEM Gasket, but when I put it together without applying Liquid Gasket, it leaked exhaust a little. It was fixed when I applied Liquid Gasket.
Performance, handling, and sound
At very low speed, it is still the same, but above that, it is easier to ride with a good amount of release.
It is lighter than the heavy OEM Exhaust System, but it is heavier than the Other Brand Product, so the handling is the same.
As for the sound, it has a crisp, mid-range bass. It's a good volume and sound quality that you can hear when accelerating and decelerating, but hardly feel when cruising.
[Looks]
I like the look of the OEM and this is where I was most drawn to buy it. I like it very much. I like the fact that the burned color on the ends is only Accent.
The exhaust port was also made to avoid Blinker and Fender, which I thought was well thought out.
[Subtle Point]
This level of burnished color is fine, but I still wanted Solid Collar.
I replaced the supplied JointClamp with a different one later because the screw part was too long and the size of the tightening part was too small (11mm).
By the way, the size of the inner diameter is 36~39mm.View Detail
In my case, I have a problem with the OEM Heat Guard installation as others have written That was not the case at all
The Heat Guard that is already attached to the car was not able to come off because it was stuck, so I had to buy a new Heat Guard separately You can purchase the Guard (OEMParts) and install them on the car body first Work
The instruction manual was very kind and explained how to install it properly, but the Heat Guard installation was very good I think the Trap is written in such a way that 4 Screws are diagonal to each other (Actually, there are 5 Screws on the black part, so there are 5 Screws & hellip;)
When I applied the Heat Guard to the Silencer to fix it temporarily, I found that the position of the hole was perfect was Gap W
The bottom three don't fit with the top two screw holes, and the top two don't fit with the bottom three Because it's like that …
Temporarily fix the upper two screws and push up the Heat Guard from the bottom When I put the Screw on the bottom 2 (one of PlusBlack part) I used the beehive to get it on In this way, it was surprisingly easy
In addition, please loosen the screw that fixes the Black Guard part to the aluminum part first, and then you will be able to use it When the bottom two screws are attached, adjust the screw to fit properly (This is also written in the instruction manual) (This is also mentioned in the instruction manual) However, the black part is fixed to the aluminum part The Screw is on the reverse side, so when it is positioned, it is attached to the Silencer part The book must be fixed before
Thanks to the OEM Heat Guard, it doesn't stand out in a weird way, and it's not too loud I like the fact that the Image of SEROW is not changed I think the sound became Large sound feeling …
The performance of the car feels torqued up from the start of opening from Idling, and the Clutch Meat is now easier
There is an improvement in the sense of torque even when turning it around, and there are fewer shocks when downshifting I really like the fact that it was
It had less than 50,000 miles on it with the OEM exhaust system, so that's why the difference in performance You may feel strongly about the …View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.