'.在一個小圍欄內對每個氣缸進行燃料控制
。此外,還可以增加一個額外的2位置地圖切換功能,內置
。任何單極單擲(spst)開關,並在兩個不同的燃油地圖之間切換
.齒輪/速度輸入允許根據齒輪調整地圖
.指揮官v能夠允許每個氣缸單獨映射,並為每個齒輪連接齒輪位置輸入
。
.增強的'加速泵'功能
.用於越野車和ATV,請參見相應的目錄下的moose power commanders
.制造。在美國,
二級燃油模塊
允許在8個噴油器的自行車上使用dynojet快速換擋傳感器,這提供了額外的燃油消耗。有了燃油控制和換檔功能
如果檔位輸入連接到你的PCV,你可以在 "每檔 "的基礎上調整所有的噴油器
。
此外,需要注意的是,單根電纜連接到pcv
。您還可以分別映射每個噴油器,為您提供多達48個完整的映射
。基本'模式允許你有一個單一的燃料表,簡單地將所要求的燃料變化同時放在上部和下部噴油器模塊中
。上下噴油器的調整幅度高達+250/-100%
"基本模式 "是需要更多燃料的改裝發動機的完美設置。比四噴油器能提供的更多,但不需要分別映射每個氣缸和每個檔位的復雜性
快速換檔擴展。qem允許dynojet快速換擋傳感器與power commander v一起使用在有八個噴油器的自行車上
。附上你將擁有完整的快速換擋功能
.QEM連接到上部噴油器,然後進入PCV
.
・Fuel control for each individual cylinder in a smaller enclosure
Warm-up" fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading)
・Reduced size from the PCIII USB
・Easy to install
・USB powered from computer;9 volt adapter is no longer needed
・Two-position map-switching function built in
・Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
・Gear/speed input allows for map adjustment based on gear
・Analog input allows user to install any 0-5 volt sensor
・Build an adjustment table based on analog input such as boost or temperature
・Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
・More tuning ranges than PCIII USB
Enhanced "accel pump" utility
・For Offroad and ATV, see appropriate catalog under Moose Power Commanders
・Made in the U. S. A.
SECONDARY FUEL MODULE
・Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
If the gear position input is connected to your PCV, you can adjust all of the injectors on a "per gear" basis.
・Allows for the adjustment of all eight-injectors
・See application chart for availability
・Single cable connection to the PCV
・Connects to the upper injector rail using OEM connectors
・You can also map each injector separately, giving you up to 48 complete maps
The "basic" mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at The same time
・Adjust both upper and lower injectors by as much as +250/-100%
The "basic" mode is the perfect setting for modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
・Once the sensor is attached you will have full Quick Shifter functionality
・The QEM connects to the upper injectors and then into the PCV
R&G Aero Crash protectors features our stylish, aerodynamic Aero Bobbins and are available in Black or White options
Fuel control per individual cylinder in the Smaller claw jar
Warming Up" fuel adjustment (Unit that reads the engine temperature and allows fuel/timing adjustments based on the readings)
Size reduction from PCIII USB
Installation is easy.
USB supplied by Computer; the 9BoltAdapter is no longer needed
Built-in 2Position Map Switching Function
SinglePoleSingleThrow(SPST)Switch is added and two different fuel maps can be switched.
You can adjust the map based on GEAR by inputting GEAR and speed.
By using Analog input, you can attach a 0-5 V Sensor.
Create the adjustment table based on the analog input such as Boost or temperature.
The Power-Helmet CommanderV allows you to map each cylinder individually..
TuningsRange more than PCIII USB
Enhanced "Accelerated Pump" Utility
For Offroad and ATVs, please refer to the appropriate Catalogue of Moose Power Commanders..
・Made in USA
Secondary Fuel Module
The DynojetQuick shifterSensor can be used on eight InjectorMotorcycles to provide additional fuel control and shifter functionality.
If the GEAR position input is connected to a PCV, all injectors can be adjusted in "GEAR unit".
All 8 injectors can be adjusted.
See Available Applications Chart.
Single cable connection to PCV
Connect to the upper injector rail by using the OEMConnector.
It is possible to map each injector separately to complete a map of up to 48 injectors.
The "Basic" mode allows for a single fuel table to feed the requested fuel changes into both the upper and lower injector modules simultaneously.
Injectors + 250/ -100%.
The 'basic' MODE is the perfect setting for a modified engine that requires more fuel than 4 injectors but does not require the complexity of mapping each cylinder and each GEAR separately.
QUICK SHIFTER EXPANSION MODULE
The QEM allows the Dynojet Quick shifterSensor to be used with the Power Commander V on a motorcycle with eight injectors.
Once the Sensor is installed, the full features of Quick Shifter can be used.
The QEM is connected to the upper injector and then to the PCV.