- 工具
- 通用型螺絲
- ZETA
- ZETA - 通用型螺絲
- 商品列表
- 鈦 螺絲
鈦 螺絲
Product # ZT08-0515
24.98 ~ HKD (483 日幣)
定價 26.79 HKD 节省 最多 0%
+5~ Webike點數 (0.25 HKD)
當訂單成立時,我們將確認製造商的庫存並透過e-mail發送確認出貨時間給您。
Product # ZT08-0515
24.98 ~ HKD (483 日幣)
定價 26.79 HKD 节省 最多 0%
+5~ Webike點數 (0.25 HKD)
For a friends bike they wanted some titanium tapered bolts to replace the stainless ones. Tese came out as being really good value so ordered. A little on the sharp side but overall, not too bad at all. They are happy with them and where they are, as long as the top looks good, it's all goodView Detail
It is light and strong, but if you don't tighten up the torque management, you'll get a lot of problems I think it will damage other components
I have tightened variously with iron, stainless steel, and aluminum, but when I choose a material, I think that I will be able to use it It is I'll choose carefully which parts to use and which parts not to use I don't use it for parts that are easy to lick, parts that can't be removed, and parts that can't be post-processed
Between this Titaniumium Bolt and the Titaniumium nut, you can get a tight fit It tightened comfortably, and I was impressed for the first time when I tightened the Bolt (and a mixture of discomfort and discomfort; Torque is sharp, light, but hard...) 。
A very beautiful exterior, Screw Mountain enchanted
View Detail
The Babyface Rear Sets for the 2021 MT-09SP have the rear master cylinder offset and the master cylinder is pushed via the M6 Bolt attached to the brake pedal. The bolt that attaches the Master Cylinder was damaged in the past, so we replaced it with a Titaniumium Bolt made by ZETA, which was well made for a reasonable price. I found this ZT07-0645 (M6 P=1.0/L=45), which I thought could be used to replace the M6 Cap Bolt that pushes the Master Cylinder.
Simultaneously paired TitaniumFlange Lock NutZT21-1061 (M6 P=1.0) I also installed a "Tightly" and it tightens firmly and I feel like it is tightly, but not really.
Design-wise, it would have been best to have this Size in Taper shape, but I am satisfied with this inexpensive purchase with no functional problems.View Detail
Following the replacement of the damaged mounting bolt of the rear brake master cylinder with a ZETA Titaniumium Bolt, the mounting part of the rear sets was also replaced with this ZT07-0820 (M8 P1.25 L=20mm) I replaced the mounting part of the Rear Sets with these Titaniumium Bolt.
A low head bolt was required for the Master Cylinder installation, but a regular cap bolt was sufficient for this part, which is attached to the frame.
Compared to the included Bolt, the TitaniumMaterial has a higher texture and is very self-satisfying.
*The included Bolt may be sufficient in terms of performance, but while I appreciate the availability of the Titaniumium Bolt at a reasonable price, I feel like I have stepped into the Titanium swamp.
The reason for this was to change the bolt of the damaged Rear master, but we have been interested in other bolts and have been reducing the weight of both the body and the wallet.View Detail
The bolt for mounting the rear master cylinder of the Babyface Rear Sets for the 2021 MT-09 was damaged, so this material is available as a replacement.:I purchased a TitaniumM8 Cap Bolt (P1.25 L=20mm).
The bolt included in the above Footpeg Kit had a slightly special shape with a 4.5mm high head and a 13.7mm (machined?) outer diameter. As a result of various searches, the cap bolt of the low head made by ZETA could be installed without contact between the heel plate and the outer diameter of the bolt and without protruding in the height direction.
The other bolts included with the Footpeg Kit above were torqued exactly, but this bolt for fixing the MASTER had a gap on the tool for some reason, and I thought it might be an inch, but when I measured it with Caliper, it was 5.3mm, so 7/32. (5.556mm) If you feel something bad when tightening Bolt, stop and calm down.
If you tighten it forcibly and it completely licks when you remove it, it will really cost Large strange labor and extra expense, so it is recommended to replace it with a new one or a countermeasure.
*However, it is not all Titaniumium Bolt, but why is the Bolt used for that product? (Material and head shape and strength) I think that there will be fewer failures later on if the selection is made after considering whether or not theView Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
通知
在您加入購物車前請選擇選項。
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.