【製造商品編號】Q5K-YSK-085-J01
【安裝工時】0.6h
這是在'mt-09 tracer（2017款）上安裝qss（快速篩分系統）的套件，這是'mt-09（2017款）和'mt-10等車型的標准配置。
【QSS（快速篩分系統）】
QSS（快速篩分系統）是通過在換擋連桿上安裝換擋開關，實現不松開離合器快速換擋的系統。
當換擋開關檢測到升擋操作時，"ecu計算 "會立即修正發動機的輸出功率，並取消嚙合擋位的驅動力矩，以支持升擋。
雖然該系統最初是為賽車而開發的，因為它可以在不松開加速踏板和離合器的情況下進行換擋，但現在它也被用於公共道路，因為它可以減少疲勞。
為方便公共道路使用，本示蹤產品有以下規格。
。只有當車速超過20公里/小時，發動機轉速超過2000轉/分，並且正在加速時，系統才會啟動。
。只有在上移時才有效。不支持降檔。
。當駕駛員握住離合器時，離合器沒有被激活。
從mt-09 tracer(2017款)開始，`ecu和電表已經預接線，允許將開關作為改裝選項安裝。
*不適用於MT-09 tracer（2015和2016款）。 XSR900（2016款）。
*當安裝在xsr900（2018款）上時，`支架。反射器(BS2-85132-00)`螺栓。需要法蘭(95022-06025)`墊圈`板(90201-082p2)。
[Manufacturer's Parts Number] Q5K-YSK-085-J01
[Installation Duration] 0.6h
[Included Parts]
Bracket, Reflector (Parts Number: BS2-85132-00) x1pc.
Bolt, Flange (Parts Number: 95022-06025) x1pc.
Washer, Plate x 1
It is a kit that mounts QSS (Quick Sift System) which is equipped as standard on MT-09 (2017 model) and MT-10 etc. to MT-09 Tracer (2017 model).
[QSS (Quick Sift System)]
It is a system that installs a shift switch on the shift change link and enables a quick shift up without disengaging the clutch.
It corrects the engine output instantaneously by ECU operation, cancels the driving torque of the engaged gear, and supports shift up when the shift switch detects an upshift operation.
It is a system developed originally for racing but the adoption is also spreading to commercial vehicles because it can reduce fatigue in public road since it is possible to shift without releasing the accelerator and disengaging the clutch.
This product for tracer is woven into the following specifications considering convenience in public road use.
It operates only when the speed is 20 km/h or more, and the engine speed is over 2000 rpm, and the three conditions during acceleration are complete.
It operates only when upshifting operation. It does not correspond to shift down.
It does not work while holding the clutch.
It is prewired to connect the switch that correspond to ECU & meter so that it is possible to mount this switch as a retrofit option from MT-09 Tracer (2017 model).
*It is not mountable to MT-09 Tracer (2015-16 Model)/XSR900 (2016 Model).
*It requires bracket/reflector (BS2-85132-00), bolt/flange (95022-06025), washer, plate (90201-082P2) for XSR900 (2018 model).
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING