詳情
grom.msx125.msx125sf的發電機安裝在l.曲軸箱蓋上，使飛輪的連接方向更靠近外側(軸尖)。
這就是為什么沉重的飛輪的旋轉重量掛在曲軸尖外側的原因，這也是為什么改進後的發動機接力器不能加速的原因。減速的負擔加倍。
這可能會造成發電機和飛輪之間的干涉，從而對點火正時產生不利影響，或者在最壞的情況下，損壞曲軸。
該定子內部有一個滾珠軸承，將曲軸軸頸由3點支撐變為4點支撐，以限制內燃機高轉速范圍內出現的曲軸跳動。
通過限制這種情況，減少了跳動，提高了普通曲軸的耐久性。
■專利結構
安裝結構，可以在四個點上支撐曲軸軸頸，而不需要更換曲軸
建議配備spTakekawa發動機部件的車輛使用。
spTakekawa的Super Head 4v+r Bore Up Kit是高轉速、高響應發動機的必備品。
*購買前必須檢查當前正常的曲軸。
※如果曲軸跳動超過標准值，必須拆下或更換曲軸。
*由於定子組件的安裝形狀不同，曲軸支撐適配器的產品編號根據車輛名稱和車架號而不同。
The crankshaft journals are now supported at 4 points, instead of 3 points, to allow the crankshaft to be supported at higher RPMs It reduces shaft runout and increases the durability of the normal crankshaft." Crankshaft support adapter."
* Details
The generator for the GROM, MSX125 and MSX125SF is the L. The flywheel is mounted on the crankcase cover, so the flywheel is mounted on the outside (at the end of the shaft) I'm going to lean in..
This is why the rotational weight of the heavy flywheel is outside the tip of the crankshaft, With an engine with improved pickup, the burden of acceleration and deceleration is doubled.
By installing the ball bearings in the support plate to be installed in the crankcase, the crankshaft journal is changed from two points to three-point support.
This product is equipped with ball bearings in the stator to reduce the crankshaft journal area to 3 The crankshaft is now supported at 4 points, instead of 4 points, and the crankshaft runout at the high RPM range of the bore up engine is reduced. Limit the.
This limits the runout and increases the durability of the normal crankshaft..
Patent Pending Structure
The crankshaft does not need to be replaced, and the crankshaft journals can be mounted on the factory parts. Assembly structure that allows for four points of support
Recommended for the car with SP Takekawa engine parts..
SP Takekawa Super Head 4V+R Bore Up Kit etc., High Response Engine It's a must-have for.
*It requires to check the work of the STD crankshaft that is currently used before ordering.
*It requires replacement of the crankshaft to perform the up swing if the crankshaft is deflection occurs over the standard value.
*The product number of crankshaft support adapter is different depending on the vehicle name and frame number because the mounting shape of the stator comp is different.
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING