【顏色】
・後視鏡鏡桿:消光黑
・車體安裝固定座:消光黑
【材質】
・後視鏡本體:輕量強化塑膠
・後視鏡鏡桿:鋁合金鏡桿
・車體安裝固定座:鋼製固定座
【尺寸】
・後視鏡鏡面尺寸:長度169mm/長度82mm
・後視鏡鏡桿尺寸:鏡桿全長115mm
・對應安裝後視鏡固定螺絲:6mm螺絲
・螺絲孔距:最少寬度20mm-最大寬度61mm
單邊後視鏡:使用led晶片7個
透明鏡片:e6標識刻印
定位燈:矽膠管風成型硬化白色led
【套件內容】
・後視鏡本體(左右一組)
・襯套
・烏龜夾
・螺絲類
・內六角扳手
・束帶、其他
*此產品為2007年1月1日新認證的車輛鏡像標准(新參考一輪) : 94mm以上,鏡型小於150mm,外形變形 : 直徑78mm的圓形為膀胱鏡 (橢圓形也是畸形的). 長x寬120×200mm或以下的對應產品)。
*請注意,在移除oem閃光燈並單獨使用本產品的情況下,並不保證車輛檢測的一致性,與使用oem鏡而不是blinker型鏡的車輛是分開使用的. 此外,請聯系車輛檢查車間等. 您居住的地方,了解更多關於汽車檢查環境等方面的信息。
*請注意,本產品上的銘牌不受任何限制,其激活效果取決於安裝車輛、區域環境等。
*不需要更換使用本產品的繼電器wen和現有的閃光燈,但它需要對應於led的ic繼電器(kijima part number) : #304-052, #304-0526)當單獨使用它作為閃光燈時. 請提前檢查是否需要哪個ic繼電器取決於車輛。
*在安裝和連接閃光燈等過程中需要對車輛進行處理. 關於通用產品. 推薦給那些不確定是否要求在當地的專業商店工作的人。
[Color]
・Mirror shaft: Matte black
・Body mounting washer: Matte black
[Material]
・Mirror body: Lightweight reinforced resin
・Mirror shaft: Aluminum Shaft
・Body mounting washer: steel washer
[Size]
・Mirror surface size: Length 169mm / Width 82mm
・Mirror shaft size: Shaft length 115mm
・Compatible mounting mirror fixing bolts: M6 bolt
・Bolt hole pitch: Min. width 20mm - Max. width 61mm
Mirror one side: Uses 7 LED chips
Clear Lens: E6 mark engraving
Position lamps: Silicon tube style molding hardening white LED
[Set components]
・Mirror body (right / left set)
・Spacers
・Electro Tap
・Bolts
・Hexagonal wrench
・Cable Ties, Others
Mirror surface is more than 94mm, and outer diameter of the main body is less than 150mm Square and irregular shape: A perfect circle of 78mm in diameter should fit inside the mirror (ellipse is also an odd shape).It is a conformity product (length 120mm x width 200mm or less).
*The E mark on this product is not necessarily effective depending on the installation vehicle, regional environment, etc.
*If you use this product with existing blinkers, you do not need to replace the relay. However, if you use this product alone as a blinker, you will need an IC relay compatible with LED (Kijima part number #304-052, #304-0526, etc.).Please confirm in advance which IC relay is required for your vehicle before considering.
*This product is a universal product and requires modification to the vehicle for installation and connection of the blinkers.If you have any questions about the installation of this product, it is recommended that you have it installed by a professional shop or vehicle dealer.