自動打開和關閉.無線快速充電
兼容Qi標准
車載手機支架 智能手機支架
歡迎來到舒適的新維度。
為您帶來全新的舒適體驗。
比較。這種高品質的...
邊框和觸摸傳感器自動開合
當您將手機放在邊框上時,邊框會自動閉合,當您觸摸傳感器時,邊框會自動打開。
安裝智能手機。不費勁就能把它拆掉。
可以單手快速連接和拆卸。(操作視頻)
符合Qi標准,高速無線充電(支架)
當你想為你的設備充電時,只需將其放在支架上即可。它瞬間開始充電。
不需要將充電線連接到手機上。
(*制作規格表)
可帶殼充電(支架)
感應距離10mm,可帶手機在保護殼內充電
優秀的運動范圍(手臂)
。伸縮式支撐桿的擺動范圍約為270度,長度可無級調節。
支架可360度旋轉,因此您不必擔心屏幕方向的問題。
安裝的自由度和舒適度大大增加。
各種型號(支架)
可移動的邊框和可調節的支架可以使用各種形狀的智能手機。
強大的吸盤配備了強大的
附着在儀表盤和擋風玻璃上。
可安裝在各種車型的儀表盤上。
當吸附力低時,可以用水沖洗。
建議在辦公室以及車內使用。
支架上配有硅膠墊,防止手機滑落地面。
無論路面如何,都能牢牢地固定住。
也可以安裝在空調出風口上(與手臂有關)
本產品除長臂外,還包括空調出風口專用夾。
可以安裝在您選擇的位置,給您更多的安裝選擇。
如果你不想在炎熱的天氣里把它安裝在儀表盤上,這就是完美的解決方案。
支架兩側的指示燈
指示燈顯示充電狀態,一目了然。
充電時燈會變成藍色,不充電時燈會變成綠色。
步進電機,操作安靜(支架)
當手臂打開和關閉時,操作非常安靜。我在聽音樂等的時候,也不會打擾我。
各種保護功能(功能說明)
本產品具有 "過溫升保護 "功能。過電壓保護。
提供 "短路保護 "等安全功能,以保護智能手機。
Fod功能(特征描述)
Fod是異物檢測的縮寫。這是一個停止功能。
如果此功能不工作,則可能會降低充電效率並使金屬物體發熱。
符合各國安全標准(功能說明)
歐洲的ce標志,證明其符合各國統一標准的安全標准
。出口北美(美國和加拿大)的fcc認證
日本手冊中包含了證明產品不含有害物質的Rohs指令
日本手冊中包含了日本手冊,所以您可以放心地開始使用產品。這還是第一次。
Automatic opening / closing and wireless fast charging
Compatible with qi standard
Mountable Smartphone Holder
0Welcome to a new level of comfort.
〇A new level of comfort for you.
■Please make a comparison.This high quality.
■Automatic open / close & touch sensor
The side arm automatically closes when you place your phone on it and opens when you touch the touch sensor.
No more hassle when installing or removing your smartphone.
Quick and easy to put on and take off with one hand.(Operation Video)
■Up to 10W high-speed wireless charging compatible with qi standard
Just put it on the stand when you want to charge it.Starts charging instantly.
You don't need to connect the charging cable to your phone every time.
(*Specification table is created) (Compatible with 5W / 7.5W as well)
Charge is available even with the case on (stand)
The sensing distance is 10 mm.You can charge your phone even with a protective case on it!
■Excellent range of motion (arm)
The telescopic support pole swings in a range of approximately 270 degrees and is infinitely adjustable in length.
The stand can be rotated 360 degrees, so you don't have to worry about the horizontal and vertical orientation of the windshield.
It significantly increases the flexibility of the installation location and comfort.
Compatible models are various (stand)
With its movable side arms and adjustable stand, it can be used with smartphones of various shapes.
Equipped with a powerful suction cup (arm)
The suction cup part, which is important when attaching to the dashboard or windshield, has a strong
If dust or foreign matter adheres to the surface, wash it with water and dry it thoroughly to restore the adhesive strength.
It can be installed on the dashboard of various models.
It can be washed with water when the adsorption power becomes weak.
It is also recommended for use in the office as well as in the vehicle.
How to improve the holding power (Stand)
It has an anti-slip silicone mat on the surface of the phone.
You can hold it firmly regardless of the shape of the road surface when riding.
It can also be attached to air conditioner vents (arm related)
In addition to the long arm, this product also comes with a special clip for the air conditioner vent.
You can install it anywhere you like, giving you more options for mounting locations.
It is also ideal for those who do not want to install it on the dashboard during hot weather.
LED indicator lights located on both sides (stand)
LED indicator light to show charging status at a glance.
It lights up blue when charging, and lights up green when not charging.
Stepping motor with excellent quietness (stand)
Very quiet operation when opening and closing the arm.It does not bother you when you listen to music.
Various protection functions (function description)
This product has "excessive temperature rise protection function, overcurrent protection, overvoltage protection, short circuit protection function" etc.
It is equipped with various safety features to protect your smartphone.
Equipped with FOD function (automatic foreign object detection) (functional explanation)
FOD is an acronym for Foreign Object Detection.
This function stops the power supply when a metallic foreign body is caught between the smartphone and the charging stand.
If this function does not work, the power supply will be continued and the charging efficiency may decrease or the metal object may become abnormally heated.
Meets the safety standards of various countries (functional explanation)
・CE mark certifies that the product meets the unified safety standards of EU countries
・FCC certification certifies that the product meets the safety standards required for export to North America (USA and Canada)
・RoHS Directive certifies that the products do not contain hazardous substances as defined by EU